Atdec TH-PPE-24 User Manual

TH-PPE-24

General Features

Installation Instructions & Technical Specifications

24” (610mm) Fixed Length Projector Pole Accessory

Maximum Weight:

454kg (1000lbs)

Pole Compatibility: Colour: Warranty:

1.5” NPT White 10 years

Component Checklist

Pole Connector

Extension Pole

Plastic Cover

HARDWARE

Set Screw

(x4)

Security Screw

(x4)

2.5mm Security
Allen Key

IMPORTANT INFORMATION:

! IMPORTANT - Install Telehook Projector Pole as per
installation instruction.

! This product supports a maximum load of 454kg (1000lbs.).
! The manufacturer accepts no responsibility for incorrect installation.

Step 1. Check Components

Check you have received all parts against the component checklist and hardware above.

Step 2. Assembly

Existing Installation

Thread must be 1.5”
NPT

Technical Specifications

54mm (2.1”)

1.5”NPT

OD

ID

48mm

(1.9”)

41.8mm
(1.6”)

1.5”NPT

39.1mm
(1.5”)

47.3mm
(1.8”)

2.1. When pole & connector are
in place, secure by inserting the 4
Standard OR Security Set Screws
using the supplied Allen key.

Note: Pole can be installed in
reverse orientation.

Extension

Pole

Removable
Plastic Cover

No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.

Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 24.05.13 ©

76mm

(3”)

649.6mm
(25.5”)

24”

(609.6mm)

1.5”NPT