Atdec TH-PPA-24-48 User Manual

TH-PPA-24-48

Component Checklist

Installation Instructions

24-48” (610-1220mm) Adjustable Projector Pole Accessory

Adjustor Pole Plastic CoverExtension Pole

HARDWARE

Security Set Screw

(x2)

Security Socket Pan Head

Screw (x1)

Set Screw

(x2)

Standard Socket Pan Head

Screw (x1)

IMPORTANT INFORMATION:

! IMPORTANT - Install Telehook Adjustor Pole as per installation instruction.

! This product supports a maximum load of 454kg (1000lbs.).
! The manufacturer accepts no responsibility for incorrect installation.

Step 1. Check Components

Check you have received all parts against the component checklist and hardware above.

Step 2. Configurations

24” Range 26-48” Range

4mm Security Allen Key

2.5mm Allen Key

2.1. Configure components as per image below for a pole length of
24”.

2.2. Screw Extension Pole in a clockwise direction into Ceiling Plate
Bracket.

Existing Ceiling
Plate Bracket.
Sold seperately
and available from
ATDEC.

Extension Pole

2.3. Configure components as per
shown below for a pole length range of
26-48”.

2.4. Screw Extension Pole in a clockwise
direction into Ceiling Plate Bracket.

2.5. Locate Adjuster pole on Extension
Pole aligning the holes with the slot.

Extension Pole

Holes

Adjuster Pole

Slot

Existing Ceiling
Plate Bracket

Step 3. Assemble to desired length

3.1. Insert the one Standard or Security Socket Head Pan Screw through the slot

in the Adjuster Pole into either of the 2 visible holes in the Extension Pole. Each
hole enables a different length range.

Upper Hole

Lower Hole

27”

29”

....47”

3.2. Move the extension pole to the desired length and rotate to locate in one of
the three slots. Adjust the tightness of the screw using the 4mm Security Allen Key
supplied.

Step 4. Secure Position

4.1. When desired pole length has been selected use either the

Security or Set Standard Screws to secure position. Tighten with the

2.5mm Security Allen Key supplied.

26”

28”

....48”

4.2. Snap off upper segment of cable cover for cable access.

Cable

Cable

Snap off

Cable

No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.

Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 22.05.13 ©