TH-EMC
Component Checklist
Frame
Tilt
Mechanism
Non-slip Pads
Glass Shelf
Installation Instructions
Mobile TV Cart Motorized
CASTER (x4)
M10 Washer
M10 Nut
HARDWARE
M4x7.5 (x2)
M4x8 (x2)
M5x6 (x6)
M8x25 (x4)
Nylon Shelf
Bolt (x4)
Caster Spanner
Display Mounting
M4x16/25mm (x8 each)
M5x16/25mm (x8 each)
Screws
(x2)
Caster Wheel
Power
Board Holder
M8x10 (x8)
M8x16 (x4)
M5 Washer (x8)
M8 Washer (x8)
Column
Left Shelf
Right Shelf
Bracket
ELECTRONIC
Mounting
Bracket (x2)
Bracket
Extension
Bracket (x4)
Long Cable
Cover (x4)
Extension
Washer (x4)
Short Cable
Cover (x2)
Lock Cap
IMPORTANT INFORMATION:
! IMPORTANT - Install Telehook Motorised TV Cart as per Installation Instructions.
! This product supports a maximum load of 50kg (110lbs).
Electrical Ratings: Input Ratings - 120 V ac, 60 Hz. Output Ratings - Max. 22 V dc, 3 A.
!
! This product only supports displays with mounting hole configurations from:
Transformer
Wireless
Remote Control
Wired Remote
Control
200mm wide x 200mm high up to 800mm wide x 450mm high.
! The manufacturer accepts no responsibility for incorrect installation.
Step 1. Check Components
Check you have received all parts against the Component Checklist and Hardware above.
Step 2. Assemble Base
Frame
LOCKED
M4x7.5
Screw (x2)
Power
Board Holder
Step 3. Fasten Column to Base
M8x25
Screw (x4)
Allen Key
Spacers (x12)
¼” Washer (x6)
5
/16” Washer (x2)
M6x20/40/55mm
(x6 each)
M8x20/40/55mm
(x6 each)
Column
UNLOCKED
Caster Spanner
Caster Wheel
M10 Washer
M10 Nut
Step 4. Connect Cables Step 5. Install Wiring into Column
NOTE: Wired Remote Control and
Wireless Remote Control are used
To Motor
Safety
Micro-Switch
Transformer
to adjust the height of the Display
up and down.
Wired
Remote Control
To Mains
Step 6. Fasten Mounting Brackets to Display
Step 7. Assemble Tilt Mechanism
Mounting
Bracket
TOP
Washer
Spacer
(optional, use only for
recessed mounting holes)
Mounting Screw
Step 8. Hook Display onto Column
HOOK
OPTIONAL EXTENSION
(upto 800mm wide)
M8
Washer
Extension
Washer
Safety Micro-Switch
M8x10
Screw
Extension
Bracket
M4x8
Screw
Lock Cap
Column
M8x16 Screw
5
/
” Washer
16
Step 9. Set Display Tilt
+10°
FORWARD TILT
To Unlock, reverse rotation.
NOTE:
Allen Key
Tilt Mechanism
LOCK
Tilt Angle
Step 10. Cable Management
Short Cable Cover
Long Cable Cover
SHELF BRACKET 3 DIFFERENT HEIGHT SETTINGS
1
489mm
(19.3")
2
454mm
(17.8")
3
419mm
(16.5")
Step 11. Fix Shelf Brackets to Column
Right
Bracket Shelf
Bracket Shelf
M5x6 Screw
Left
Mounting Option
Mounting Option
Mounting Option
1
2
3
Step 12. Install Shelf
Non-slip pads
Glass
Shelf
Nylon
Shelf Bolt
Installation Complete
No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 26.06.12©
Loading...