Page 1
Technical Specifications
TM
TH-3070- CTW
Dimensions Side View
100mm
(4”)
50mm (2”)
Dimensions Front View
ADJUSTMENT RANGE
252.5mm (10”)
130mm
(5.12”)
180mm
(7.01”)
Flat Panel Ceiling Mount
460mm
(18.11”)
230mm
(9.01”)
ADJUSTMENT RANGE
Telehook Flat Panel Ceiling
Mount supports a maximum
weight of 91kgs (200lbs)
NOTE:
The Telehook Flat Panel Ceiling
Mount is designed to suit most
VESA and non-VESA compliant
The installer should satisfy
themselves that the ceiling is
strong enough to support the
Telehook Flat Panel Ceiling Mount
unit of 14kgs (31lbs) plus the
maximum allowable monitor
weight of 91kgs (200lbs). Total of
displays.
105kgs (231lbs).
Warranty: 10 years limited
252.5mm (10”)
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 11.04.11 ©
79mm
(3.11”)
200mm
(8”)
79mm
(3.11”)
252.5mm (10”)
30mm (1.18”)
180mm (7.09”)
685mm (27”)
735mm (29”)
460mm
(18.11”)
430mm
(17”)
388mm
(15.25”)
252.5mm (10”)
Page 2
Assembly Configurations (all poles are supplied with TH-3070-CTW)
Range of Movement
Option 1: 220mm (8.66 ”) - 470mm (18.5”)
Min
220mm
(8.66”)
Max
470mm
(18.5”)
6x50mm (2”) incremental positioning options.
Option 3: 1070mm (42.13”)-1820mm (71.65”)
Setting A Setting B
Min
1070mm
(42.13”)
1470mm
(57.87”)
1420mm
(55.90”)
Max
1820mm
(71.65”)
Option 2: 650mm (25.5”) - 1000mm (39.37”)
Min
650mm
(25.5”)
8x50mm (2”) incremental positioning options.
Max
1000mm
(39.37”)
Option 4: 1650mm (65”) - 2000mm (78.75”)
Min
1650mm
(65”)
Max
2000mm
(78.75”)
Ceiling Mount
5mm
(0.20”)
49mm
(1.92”)
527mm
(20.75”)
Outside diameter
Ø64mm (2.5”)
360°
Rotation
5°
Cable Access Port
Ø40mm (1.58”)
25mm (1”)
5°
25°
5°
Ø190mm (7.5”)
Ø55mm
(2.17”)
150mm
(5.90”)
10mm
(0.39”)
90mm
(3.54”)
150mm (5.90”)
CEILING PLATE HOLE PATTERN
A: 9x50mm (2”) incremental positioning options.
B: 9x50mm (2”) incremental positioning options.
8x50mm (2”) incremental positioning options.
Min. inside diameter
Ø51mm (2”)
Masonry
Configuration
MOUNTING HOLE PATTERNS
Timber Beam
Configuration
Loading...