Atdec SD-POS-HA-B2B Technical specs
SD-POS-HA
Technical Specification
SD-POS-HA-B2B
Display | POS Height Adjustable
Dimensions
NOTE:
! This product has been designed to mount VESA compliant displays with 75mmx75mm and 100mmx100mm hole patterns only.
! It will support displays upto a maximum weight of 20kg (44lbs). The Back-to-Back Mount will support 2x20kg (88lbs) displays.
! Warranty: 10 years limited
OD
Ø45mm
(1.77”)
79.6mm
(3.13”)
Mounting Hole Options
Back to Back Mount
159.2mm
(6.27”)
Front Cable Access Port
32mm x 46mm
(1.26” x 1.81”)
NOTE: If cable access through
the post and work surface is required,
you will need to drill a Ø45mm
Cable Access Hole
(refer to Installation Instructions).
R otation
Y our POS HA
offers 355° of rotation.
This can also be limited to suit a specific
application.
The Direction in which you mount POS HA
will determine where the 5° gap in R otation
is located, and how you choose to limit the
rotation.
R otation Options
0° R otation ( F ixed)
0-90° R otation
0-180° R otation
0-270° R otation
0-355° R otation
Ø106mm
(4.17”)
(12.99”-17.72”)
224.68mm
(8.85”)
Direction
270°
330-450mm
Arrow
180°
100mm
Install Security
Cable around
Internal P ost
355°
75mm
84mm
(3.30”)
5° Gap in
R otation
90°
0°
USER
75mm
100mm
OR
M4 T apped
Holes
70.7mm
(2.78”)
ID
Ø46mm
(1.81”)
5° Gap in
R otation
90°
0°
133.1mm (5.24”)
Mounting Plate F ootprint
355°
270°
180°
Direction
Arrow
USER
Locking Holes ( R efer to Installation Instructions for further details)
Direction Arrow
0° L ocking Hole ( F ixed)
0-90° L ocking Hole
0-180° L ocking Hole
0-270° L ocking Hole
VESA Ball Mount
Each Ball Assembly has 40 degrees rotation about i t ’s
central axis.
±20° R otation
about central
axis
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without noticed. Published 09.03.11 ©
Loading...