Atdec SD-DP-1150 Technical specs
SD-DP-420
Technical Specification
SD-DP-750
SD-DP-1150
General Features
Display Compatibility:
Spacedec Donut Pole is compatible with most Flat Panel Displays between
12” (30cm) and 24” (61cm) that feature either 75mm x 75mm or
100mm x 100mm VESA mounting hole patterns
Display Weight Compatibility:
Each Quickshift Donut supports a maximum weight of 12kg (26.5lbs)
- Donut Pole 420mm supports a total of 12kg ( 26.5lbs)
- Donut Pole 750mm supports a total of 24kg (53lbs)
- Don ut Po le 1150mm sup por t s a total of 36kg ( 79.5lbs)
Mounting Option:
Spacedec Donut Pole Single, Double and Triple includes Bolt Through and Desk
Clamp mounting options
- Desk Clamp suits desktop thicknesses from 12mm (0.5”) - 38mm (1.5”)
- Bolt Through suits desktop thicknesses from 12mm (0.5”) - 40mm (1.5”)
Cable Management:
Cable Slot, Cable Clips and Cable Balls (included in package)
Colour:
- Pole, black textured powdercoat
- Quickshift Donut, matt black
Warrant y:
10 years limited
Donut Pole l 420mm / 750mm / 1150mm
Donut Pole 420mm shown
2
3
1
1
Vertical height adjustment
2
360°Portrait/Landscape adjustment
3
40° Pan/Tilt adjustment
Overall Dimensions
Cable Management Slot Detail
Pole Ex trusi on
Top V iew
Cable Slot
Cable Ball
Max screen
height
790mm
(31.1”)
111m m
(4.37”)
10mm (0.39”)
Ø 42mm (1.65”)
*
420mm
(16.5”)
Bolt
Through
height to
desktop
18mm
(0.71”)
Only one Quickshift Donut
will be supplied with each Pole.
Additional Quickshift Donuts are
supplied separately.
Ø 42mm (1.65”)
111m m
(4.37”)
Max screen
height 482mm
(18.97”)
750m m *
(29.5”)
Bolt
Through
height to
desktop
Max screen
height 449mm
(17.67”)
Ø 42mm (1.65”)
111m m
(4.37”)
115 0 mm *
(45.25”)
Bolt
Through
height to
desktop
DONUT POLE 420mm DONUT POLE 750mm DONUT POLE 1150mm
* The Desk Clamp mounting option increases the total height of Spacedec Donut Pole by 10mm (0.39”)
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 13.02.13©
Loading...