Atdec SD-AT-DW Technical specs

D
Wall Mount
Wall Mount
86mm (3.37”)
55mm (2.17”)
50mm
(2”)
6.5mm (0.25”)
31mm (1.22”)
48.5mm (1.91”)
82mm
(3.23”)
Technical Specifications
SPACEDEC ACROBAT
SD-AT-DW / WALL ARTICULATED ARM
NOTE: The following information is based on a Spacedec Acrobat Articulated Wall Arm with
A
General Features
1
the standard 350mm (13.75”) arm set at the 6kg (13lbs) gas strut setting.
Arm swings 180° around wall mount
74mm
(2.91”)
E
Display Mounting Options
26mm (1”)
Suits 75mm x 75mm and 100mm x 100mm mounting hole patterns
75mm x 75mm mounting hole pattern
Display
F
Cable Management
75mm
4x10mm Screws
75mm
100mm x 100mm mounting hole pattern
4x12mm or 4x16mm Screws
Display
100mm
100mm
All Spacedec Acrobat Wall Articulated Arms are supplied with 1000mm (39.37”) of Ø16mm (0.63”) black Cable Wrap.
Display at highest point
2
360° rotation
3
Up to 460mm (18”)
Pivot head pans 85°
4
5
±40° tilt, ±40° pan
Portrait/Landscape rotation
6
height adjustment
6
5
4
3
2
1
Display Compatibility:
Display Weight Compatibility:
3kg to 9kg (6.6lbs to 19.8lbs)
Wall Mounting Options:
Suits both brick/concrete and timber studs walls.
Display Mounting Options:
Suits 75mm x 75mm and 100mm x 100mm mounting hole patterns
Cable Clips (x3)
As LCD Manufacturers are constantly releasing new monitor models, Atdec does not accept responsibility if the mounting hole pattern does not comply with the international VESA standards. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 09.04.13©
Cable Management:
Cable Clips and Cable Wrap (included in package)
Colours:
Polished Aluminum, Silver or Black.
Warranty:
5 years limited
B
Overall Dimensions
Side View
635mm (25”)
C
Range of Movement
260mm (10.25”)
50mm (2”)
610 mm (2 4” )
arm at maximum elevation
arm at minimum elevation
80°
30°
Height Range
460mm
(18”)
Loading...