Atdec L-PW Technical specs
L-PB
L-PW
General Features
Technical Specifications
Desk | Single
MAXIMUM LOAD 9kg (19.75lbs)
DISPLAY COMPATIBILITY
Supports displays with VESA mounting configurations:
• 75 x 75mm • 100 x 100mm
MOUNTING OPTIONS
Levitate Articulated Monitor Arm Single includes
Bolt Through and Desk Clamp mounting options:
• Bolt Through
desktop thicknesses of 13mm-43mm (0.5”-1.7”)
• Desk Clamp
desktop thicknesses of 10mm-50mm (0.4”-2”)
INCLUDED HARDWARE
All fasteners are included.
CABLE MANAGEMENT
Internal cable management system includes
Cable Covers for upper and lower arms.
COLOUR
L-PB Polished Aluminium/Black
L-PW Polished Aluminium/White
7
1 100° Tilt
2 180° Pan
3 44° Upper Arm angle
4 360° Joint rotation
5 54° Lower Arm angle
6 180°/360° Base rotation
7 110° Portrait to Landscape
1
2
3
4
5
6
Dimensions
100° TOTAL
Upward Tilt
-90°
+10°
Downward Tilt
VESA MOUNTING OPTIONSTILT
100mm 75mm
75mm
100mm
Dimensions All measurements shown below are based on a 4kg (8.8lb) monitor. Lighter or heavier screens will slightly affect the achievable height/reach.
FULL EXTENSION
557mm (21.92”)
Minimum reach
70mm (2.76”)
Maximum height
582mm (22.91”)
127mm (5”)
Minimum height
212mm (8.34”)
Maximum reach 554mm (21.81”)
DESK CLAMP ONLY
Minimum distance between
desks 18mm (0.71”)
Mounting Options
DESK CLAMP BOLT THROUGH
Section View
25mm
(1”)
75mm
(3”)
65mm
(2.56”)
up to
50mm
(2”)
DESK CLAMP ONLY
Distance from edge
of desk, 50mm (2”)
Desk thickness
13mm-43mm
(0.5”-1.7”)
Ø8mm (0.32”)
drilled hole
Bolt Through
Washer
15.25mm (0.60”)
40mm
(1.58”)
Bolt Through
Fastener
Note: The Bolt Through Fasteners supplied with this
product support desk thicknesses between 14-43mm
116mm (4.57”)
Ø104mm (4”)
(0.5”-1.7”).
M8 bolts can be used to suit desk thicknesses outside
this range. Bolt length=desk thickness+25mm (1”).
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 19.03.12
Loading...