
Mounting hole pattern:
AC-AP-IP23
VESA adaptor mount for iPad
The AC-AP-IP23 iPad® VESA adaptor mount is a mounting
accessory that enables the Apple iPad2, iPad3 and iPad4 to
be attached to any compliant VESA mount with a mounting hole
configuration of 75x75mm. It features a “snap on” mounting
system that allows for rapid attachment and removal of the iPad
to and from the adaptor plate; whilst also providing enough
stability to ensure that your attached device will not unexpectedly
disconnect. The AC-AP-IP23 is designed to allow for uninterrupted
access to all buttons, ports and cameras and is the perfect
addition to any desktop environment.
®
Can be fixed to any mount with a
mounting hole configuration of 75x75mm
Supports iPad2, iPad3 and iPad4
Product key features:
Supports iPad2, iPad3 and iPad4
Can be fixed to any compliant VESA mount with a mounting hole configuration of 75x75mm
Provides uninterrupted access to all buttons, ports and cameras
”Snap on” mounting system for rapid attachment/removal of iPad to and from the adaptor plate
“Snap on” mounting system for rapid attachment/
removal of iPad to and from the adaptor plate
VF-M + AC-AP-IP23
Can be fixed to any compliant VESA mount with
a mounting hole configuration of 75x75mm
VF-AT-NP + AC-AP-IP23
Provides uninterrupted access to all buttons,
ports and cameras
®
Atdec Global www.atdec.com.au
Atdec North America www.atdec.com

VESA 75x75mm
iPad® compatablity: iPad2 and iPad3
ATDEC Product compatability:
Can be attached to any Atdec product with a 75 x 75mm VESA mounting hole pattern
Included hardware Colour Warranty
All fasteners are included. Black 2 years limited
The iPad
®
Mount can be fixed vertically or horizontally
Technical Specifications
iPad
®
Mount
General Features
5.3mm Countersunk Holes
Dimensions
Product information
Product Code
Compatibility
Material
Colour
AC-AP-IP23
Supports iPad2, iPad3
and iPad4
Package information, single unit
Size
30cm x 20cm x 1.8cm
(11.8” x 7.9” x 0.7”)
Ship weight
0.2kg (0.44lbs)
UPC code
881493007789
Package information, master pack
Size
51cm x 29.5cm x 46cm
(20.1” x 11.6” x 18.1”)
Technical drawings
Overall dimensions
The iPad® Mount can be fixed vertically or horizontally
Ship weight
13kg (28.6lbs)
UPC code
881493007796
Plastic
Contents
All hardware required for instal-
lation supplied
Units per master pack
Black
60
Atdec mounts are designed, developed and tested in Australia. While all efforts
have been made to ensure the information in this brochure was correct as of the
date of printing, we reserve the right to change specifications without notice. Please
refer to the website for our full range along with the latest details on specifications,
compatibility and dealer location. Atdec and iPad are registered trademarks with
all rights reserved. Copyright November 2012.
®
Atdec Global www.atdec.com.au
Atdec North America www.atdec.com