Atdec AC-AP-IP23 Installation manual
3
5
C
D
4
6
7
8
A
B
3
5
C
D
4
6
7
8
A
B
ATDEC Pty. Ltd.
Level 1, 26 Castlereagh St
Liverpool NSW 2200
Tel: +61 2 8729 5000
3
5
C
D
4
6
7
8
A
B
ATDEC Pty. Ltd.
Level 1, 26 Castlereagh St
Liverpool NSW 2200
3
5
C
4
6
7
8
A
B
AC-AP-IP23
Installation Instructions
®
iPad
Component Checklist
®
Mount M5 Star Washer
iPad
x4
IMPORTANT INFORMATION
! IMPORTANT - Install as per Installation Instructions
! Compatible with VESA mounting head with hole configuration of 75 x 75mm (3”x3”).
! The Manufacturer accepts no responsibility for incorrect installation.
Step 1. Check Components
Check you have received all parts against the Component Checklist.
Step 2a. Attach iPad® mount to ATDEC Focus Range
Using a Philips head screwdriver
thread the M5 screws into the
M5 nuts through the iPad
®
Mount
and Focus Flexistar head.
M5 Nut
x4
Step 2b. Attach iPad
VESA Plate
Using a Philips head screwdriver
thread the M5 screws into the
M5 nuts through the iPad
the Spacedec VESA plate
and the M5 Star Washer.
Mount
75x75mm
Tools Required:
Philips head
M5 x 12mm Screw
x4
®
mount to ATDEC Spacedec QR
®
Mount,
Screwdriver
Step 3. Attach iPad® to iPad® Mount
®
1.Position the iPad
in bottom half of the Mount.
2.Push the iPad® into top half of the Mount and
press firmly in each corner.
When you hear each corner CLICK into place
the iPad® will be secure.
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to the continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 17.08.12 ©
iPad® is a trademark of Apple Computer, Inc, registered in the U.S. and other countries.
‘CLICK’
2
1
Loading...