Atdec AC-AP-2010 User Manual

AC-AP-2010

Component Checklist

Installation Instructions

Adapter plate

200x100mm

Hardware

M4x6mm (x4)

TOOLS REQUIRED:

• Phillips Head Screwdriver

Adapter Plate

Installation Procedure

! IMPORTANT - Install Adapter Plate as per Installation Instructions.

! Compatible with VESA mounting head with hole configuration of 75 x 75mm (3”x3”), converting to 200 x 100mm (8”x4”).
! The Manufacturer accepts no responsibility for incorrect installation.

Step. 1 Check Components

Check you have received all parts against the Component Checklist and Hardware above.

Step. 2 Attaching the Adapter Plate to your Mount Head

Use appropriate Mounting Screws (supplied) to suit your Mount Head, either Visidec, Spacedec or Telehook.

Visidec

Adapter Plate

M4x8mm (x4)

M4x10mm (x4)

Spacedec

M4x8mm

M4x6mm

Mounting Screws (x4)

Step. 3 Attaching the Adapter Plate to your Display

Fix your Display to the Adapter Plate using the Mounting Screws supplied with your existing TV/monitor mount.

Installation Complete.

No portion of this document or any artwork contained here in should be reproduced in any way without the express written consent of Atdec Pty Ltd.

Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 04.03.09

Back of Display

M4x8mm

Telehook

c