ATCOM AT-640P Quick Start Manual

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ISSUE 1.0

20 11 -7- 28

All manuals and user guides at all-guides.com

all-guides.com

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

1 、 Installation and access ................................................................................................................. 3

2 、 Configure

AT-640P

to make

VoIP

calls ....................................................................................... 4

A 、 WAN Config ............................................................................................................................... 4

B 、 SIP Config .................................................................................................................................. 5

C 、 IAX2 config ................................................................................................................................ 6

All manuals and user guides at all-guides.com

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

1

、

Installation

Installation and

and

and access

access

Installation: Set up AT-640P as below:

If AT-640P is connect to your network. P ress Navigation button up or down to get the WAN IP address . Modify your computer’s IP address to the same network as AT-640P

K ey in AT-640P’s IP address in the web browser and press enter , then you can access AT-640P’s web manage interface. R emember the account is admin/admin for administrator and guest/guest for user .

All manuals and user guides at all-guides.com

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

2

、

Configure

Configure AT-640P

AT-640P

AT-640P to

to

to make

make

make VoIP

VoIP

VoIP calls

calls

A

、

WAN

WAN Config

Config

E nter

Network

Network �

�

� WAN

WAN

WAN Config

Config

to set the WAN setting :

AT-640P supports three different IP types: Static

IP,

Dynamic obtain IP (DHCP)

and PPPoE.You can use either of these IP types to connect the internet.

Use

Use Static

Static

Static IP:

IP:

---- Select “ S tatic ” ;

---- Enter the AT -640P’s IP address in the “ IP address ” field.

---- Set the “ Net mask”, default 255.255.255.0

---- Enter the AT-640P’s upper gateway IP address ( for example: Router ) in the “ Gateway ” field

---- Key in the DNS information in the “ Primary DNS ” and

“

Alter DNS ” fields.

Use

Use DHCP:

DHCP:

---- Select DHCP If you have a DHCP server in your network , AT-640P will automatically obtain the network information from your DHCP server.

Use

Use PPPoE:

PPPoE:

---- Select PPPoE

---- Type your PPPoE dialup information in the PPPoE setting fields: PPPoE server ( option), Username and password. T hen the AT-640P will connect to the internet through PPPoE, and automatically obtain the IP address, Net mask , Gateway, Primary DNS and Alter DNS information.

All manuals and user guides at all-guides.com

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

B

、

SIP

SIP Config

Config

E nter

VoIP

�

� SIP

SIP

SIP Config

Config

setting page and set the sip information

----Register

----Register Server

Server

Server Addr

Addr

Addr : sip server address;

----Register

----Register Server

Server

Server Port

Port

Port : sip se rver register port;

----Register

----Register Username

Username

Username : username of your sip account;

----Register

----Register Password

Password

Password : password of your sip account;

--- -Register

-Register

-Register Number

Number

Number : Phone number of your sip account; the same as username

if none

- ---

---

--- check

check

check Enable

Enable

Enable Register

Register

Register ；

T hen you can make VoIP calls if the WAN and SIP config is correct.

Notice:

Notice: Please go to the “ Config Manage ” and save the config, otherwise you will lose the setting

after device reboot.

All manuals and user guides at all-guides.com

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

C

、

IAX2

IAX2 config

config

�

Above is the IAX server configuration page

�

IAX Server Addr: Register address of public IAX server

� IAX Server Port: Register port of public IAX server ， default port is 4569

�

Account Name: Username of your SIP account (Always the same as the

phone number)

�

Account Password: Password of your IAX account.

�

Local port: Signal port of local, default port is 4569

�

Phone Number: Phone number of your IAX account .

�

Voice mail number: If the IAX support voice mail, but your username of the

voice mail is letters which you cannot input with the ATA , then you use the

number to stand for your username .

�

Voice mail text: if IAX support voice mail, config the domain name of your

mail box here.

�

Echo test number: If the platform support echo test , and the number is test

form , the config the test number to replace the text format The echo test is

to test the error status of terminals and platform

�

Echo test text: echo test number in text format

�

Refresh time: IAX refresh time

�

Enable Register: enable or disable register

�

Enable G.729: Using G.729 speech coding mandatory consultations

All manuals and user guides at all-guides.com

all-guides.com