nstallation Method
I
Fi
rst Fix
•
A Recessed Junction box
should be installed to allow
hand dryer to sit flush with the
wall.
Mounting Back Plate
•
Drill mounting holes according
to the area that the back plate
is
installed in (see
& mount the
ounting
M
Mount the Hand Dryer onto the
•
back plate ensuing that the
anti-theft screw holes are
aligned on both the Hand Dryer
and the back plate.
• C
onnect the electrical cables
and ensure correct Polarity.
back
plate
Overleaf)
Self ta pp ing
screw
Hook
groov e
Safet y sc rew h ol e
Hook
aily Use & Maintenance
D
xternal Maintenance:
E
• R
egularly clean cover with a
soft cloth, do not use harsh
detergents, Acid or Alkali Based
Cleaning products or cleaning
brushes as they may damage
the cover finish.
•
I
f using a chemically
impregnated cloth, please test
on an inconspicuous area prior
to use to check suitability.
nternal Maintenance
I
fter turning off the power supply, remove cover and
• A
check all connections,
•
Clean away any dirt that has deposited inside the hand
dryer and clean the air filter.
• Rem
P
overed under warranty
c
M
ove the motor housing and check the brushes on the
motor for wear. Replace worn Brushes.
lease note: Brushes are a consumable item and are not
ethod Of Operation:
ATC
CUB HIGHSPEED
Hand Dr
yer
Z-2651W/M/BL
Anti-Theft
Screw the anti-theft screw into
•
the threaded holes to fix the
Hand Dryer to the back plate.
Attach the air intake grill to the
•
Hand Dryer making sure it is
securely fastened.
•
Test Hand Dryer
Safet y
screw
Inl et g ri lle
nsert the back
I
of your hands
ATC Cub Hand Dryer 5mm
Plastic wall plug x4 30mm
Self Tapping Screws x4
Turn your hands
over
P
acking List
Us
er Manual
Allen Key
Rub your hands
together until dry
ecification
Sp
Voltage 230v ~ 50Hz Motor Brush Motor
hase 1Φ Sensor Range 15-20cm
P
P Class IPX1
Load
A
ir Speed
H
eat level
eatures
F
nfra-Red operated Hygienic High Speed hand dryer
• I
•
Solid Stainless Steel or Cast Aluminium Cover
uto stop Function after 40s to prevent overrun
• A
1150W
65m/s Size (mm) 280x153x162
650w-750w
roduct Description
P
I
N
ett Weight
Upp er cove r
Ins talla tion
pan el
Cor e
str uctur e
Infrared
Sensor
Lower Cover
Element
Switch
Inl et gril le
3.2kg
C
ircuit Diagram
Infrared
Sensor
Thermal
Cut Off
vironmental Protection
En
W
aste electrical products should not be disposed
of with household waste, please recycle this
♻
ATC Electrical &Mechanical provides a 12 months limited
parts warranty for the Z-2651W/M/BL as long as the following
conditions are followed:
Installation and use of the hand dryer is in accordance with the
instruction manual, which is packed with hand dryer.
In order to arrange service for the hand dryer the following
information is required.
Receipt number:
____________________________________________
Date of Manufacture:
__________________________________________
Date of Purchase:
__________________________________________
product where the facilities exist.
Please check with your local authority
Warran
ty
ecautions before installation
Pr
D
o not install in the following locations; Installation in these
areas can cause the unit to malfunction
• Areas with Temperatures below 0oC or above 40oC
• In direct Sunlight or areas above reflective surfaces
• Areas where the unit can come into direct contact with
water
• Above counters or sinks
• Areas of High moisture and Humidity levels
• Locations containing Corrosive or Oxidizing gasses
reas at Altitude above 2000m
A
•
nstallation Location
I
he Chart below shows the recommended mounting
• T
height for the Hand Dryer.
• Make sure the dryer is mounted more than 150mm away
from walls on either side of the dryer.
Ensure the wall the hand dryer is mounted on is flat and
•
smooth.
o not mount the unit behind doors where the opening of
D
•
the door may damage the dryer
Do
not install the dryer with the power connected; the
•
dryer must be connected by a qualified electrician when
being installed.
150cm
44mm
Φ6 mm
152mm
44mm
180cm
170cm
160cm
150cm
140cm
130cm
120cm
143cm
136cm
129cm
122cm
115c m
108cm
The power cord Supplying the hand dryer should be at least
1.5m² 2 Core & Earth
Loading...