ATBS Technology SC T7004 User Manual

SC-T7004 Series TPMS
Fast Installation Guide

Bluewave Technology Co., LTD.

Tel: [phone] Fax: [phone]
2F.-1, No.5, Lane 178, Jhuangjing Rd.,
Sinyi District, Taipei City 110, Taiwan, R.O.C.

http://www.7brains.com/

Email: [e-mail]

2007/4/18

ѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧѧʳ SC-T8000 Fast Installation Guide

Welcome to Bluewave Super Cat T-Type 8000 Series Tire Pressure Monitoring System (SC-T7004
TPMS). This Fast installation Guide is intended to give you a fast overview of the key steps required to

install your SC-T7004 Series TPMS. For more detailed information, please refer to the SC-T7004 Series
TPMS User’s Manual.(http://www.7brains.com

)

Installation

1. Check Components

SC-T8060 ID locating position

Receiver(Passenger)ʳ Receiver(Truck)ʳʳ T-Type Sensor

Receiver Sensor

SC-T8000 1 4
SC-T8060 1 6

SC-T8080 1 8
SC-T8100 1 10
SC-T8120 1 12
One Power Cord
One Sucker & Fixture

01:left -front tire 02:right Ωfront tire

05:left -rear tire right 03:righr -rear tire right

06:left -rrear tire left 04:righr-rear tire left

* attention: Four-wheeled passenger and

truck’ s receivers are different. Please
check the left-circle of receiver.

2. Check Sensor Identification

Number (Sensor ID) and Set

2.1 Each sensor should be

assigned a unique

identification

number (ID) which

was marked on the top of sensor.

2.2 The last two number of sensor ID has

given the locating tire position, the

order is as following:

* SC-T7004 ID locating position

01:left -front tire 02:rght -front tire

04:left -rear tire 03: right -rear tire

3. Install the Sensor into Wheel

3.1 Screw down the original valve cap.

3.2 Follow the ID’ s last two number to

install the right tire (please refer to the

2.2 illustration)

Note: Since sensors being electric
isolation processed before shipping, it is
recommended, for the first installation,
to rotate sensor forward and backward
several times to remove isolation
coating and ensure the conductivity
between sensor and valve stem.

3.3 Screw fixture: Prevent sensor from easy

removing also in favor of sensor