ATAS Opaline Panel User Manual
ATAS INTERNATIONAL, INC.
OPM
OPF
OPN
OPW
4”, 6”, 8”
4”, 6”, 8”
4 ½”, 6 ½”, 8 ½”
4 ½”
¾”
½”
¾”
¾”
½”
½”
½”
¾”
1”
OPM
OPW
4 ½”, 6 ½”, 8 ½”
4 ½”
½”
¾”
½”
¾”
SPECIFICATION DATA SHEET
1. PRODUCT NAME
OPALINE PANEL™
2. MANUFACTURER
ATAS INTERNATIONAL, INC.
Website: www.atas.com
Email: info@atas.com
Corporate Headquarters:
Allentown, PA 18106
Phone: (610) 395-8445
Fax: (610) 395-9342
Western Facility:
Mesa, AZ 85204
Phone: (480) 558-7210
Fax: (480) 558-7217
Southern Facility:
Maryville, TN 37801
Phone: (800) 468-1441
3. PRODUCT DESCRIPTION
Basic Uses:
Opaline panels have a smooth appearance
with a concealed clipless fastening system.
These panels are typically used for both
interior and exterior walls and ceilings.
Composition & Materials:
Standard Oerings: Opaline panels are formed
from .032 and .040 Aluminum; 24 gauge
Metallic Coated Steel.
Sizes:
The OPM045 is a 4 ½” panel with three 1”
wide ribs, 1 ½” on center. OPF040, OPF060
and OPF080 are 4”, 6” and 8” wide panels that
create a ush surface. OPN041, OPN061 and
OPN081 are 4”, 6” and 8” panels with a 1” raised
rib. The OPW045, OPW065 and OPW085 are
4 ½”, 6 ½” and 8 ½” wide panels with a ½”
reveal. Panel lengths are cut to customer
specications, with a minimum of 2’ to any
transportable length. The OPW and OPF
panels produced from .032 aluminum can be
lanced for ventilation.
Colors & Finishes:
A choice of 30 colors is available in a KYNAR
500® PVDF or HYLAR 5000® PVDF nish.
(Request color chart or chips). An anodized
nish is available in clear or dark bronze.
Texture may be smooth or embossed.
4. TECHNICAL DATA
KYNAR 500® PVDF or HYLAR 5000® PVDF based
nishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005, ASTM D
1400, ASTM D 4138 or ASTM D 5796
Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
TM
Opaline
KYNAR 500® is a registered trademark of Arkema.
HYLAR 5000® is a registered trademark of Solvay Solexis, Inc.
© 2009 ATAS International, Inc. LRD0909 LAT752
is a trademark of ATAS International, Inc.
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance: ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich):
ASTM G 87 or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894 and ASTM D
5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G 23, ASTM G 151 or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance – ASTM D 4214
Cleveland Condensing Cabinet: ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide: ASTM D
1308, Procedure 7.2
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
Panel testing/ratings:
Galvanized Steel: ASTM A 653
Aluminum: ASTM B 209
Coil Coating: ASTM A 755
Field Tested and Approved.
Load Tables available upon request.
5. INSTALLATION
Opaline panels are installed on a basic tongue
and groove system with mechanical fasteners.
The fasteners are hidden by the consecutive
panel. Contact ATAS technical service advisors
for more information, including details and
installation seminars.
6. AVAILABILITY & COST
Availability:
Opaline panels are available through ATAS
product distributors. A complete line of
related components and trim accessories
is available to complete the wall system. In
addition, a complete line of rainware and
perimeter roof edge trims can be supplied by
ATAS to complete the wall system. Flat sheet
and/or coil stock are available in matching
color for fabrication of related components by
the installing contractor.
Cost:
Contact ATAS product distributors for current
pricing.
7. WARRANTY
Products coated with a uoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF nish carry
a thirty (30) year limited warranty against
cracking, peeling, chalking and fading.
8. MAINTENANCE
Opaline panels are virtually maintenance
free. Surface residue may be easily removed
by conventional cleaning methods. Minor
scratches may be touched up with a matching
paint, available from the manufacturer.
9. TECHNICAL SERVICES
Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.
10. FILING SYSTEM
• www.construction.com
• www.atas.com
• Additional product information is available
from the manufacturer upon request.
Loading...