ATAS mPS120, mPV120 User Manual

ATAS INTERNATIONAL, INC.

Wind-LokTM Sot

MPS120

MPV120

SPECIFICATION DATA SHEET

1. PRODUCT NAME

WIND-LOK™ SOFFIT

MPS120 – MPV120

2. MANUFACTURER

ATAS INTERNATIONAL, INC.
Website: www.atas.com
Email: [e-mail]
Corporate Headquarters:
Allentown, PA 18106
Phone: [phone]
Fax: [phone]
Western Facility:
Mesa, AZ 85204
Phone: [phone]
Fax: [phone]
Southern Facility:
Maryville, TN 37801
Phone: [phone]

3. PRODUCT DESCRIPTION

Basic Uses:

Wind-Lok Sot Panels are used for wide
overhangs and ceilings on porches,
breezeways, carports and patios. The
panels may be used for both residential and
commercial buildings.

Composition & Materials:
Standard Oerings: Panels are roll-formed from

.019, .024 or .032 Aluminum. Panels may be
solid (MPS120) or vented (MPV120).
Sizes and Proles:
The panel width is 12”. Standard length is
12’-0”. Special lengths are available, with 8’-0”
minimum.
Colors & Finishes:
In the .032 Aluminum, a choice of 30 colors
is available in a KYNAR 500
5000® PVDF nish. (Request color chart or
chips). An anodized nish is available in clear
or dark bronze (non-vented only). The .024
Aluminum is available in white polyester nish
only. .019 Aluminum is available in 5 polyester
nish colors: Black, Antique Ivory, Cream,
Bronze and Royal Brown and Bone White in a
KYNAR 500® PVDF or HYLAR 5000® PVDF nish.
On MPV vented sot, the open area is 19.7
square inches per lineal foot.

4. TECHNICAL DATA
Applies to .032 Aluminum only:

KYNAR 500® PVDF or HYLAR 5000® PVDF based
nishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005,
ASTM D 1400, ASTM D 4138
or ASTM D 5796

®

PVDF or HYLAR

Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance:
ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich):
ASTM G 87 or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894
and ASTM D 5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822
and ASTM G 155, ASTM G 151
or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance – ASTM D 4214
Cleveland Condensing Cabinet:
ASTM D 4585
Cure Test, MEK Resistance:
ASTM D 5402
Alkali Resistance, Sodium Hydroxide:
ASTM D 1308, Procedure 7.2
Flame Spread Rating: ASTM E 84
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
Material Specications:
Aluminum: ASTM B 209
Coil Coating: ASTM A 755
Load Table available upon request.

5. INSTALLATION

The patented “hook, pull and fasten” system
allows for quick and easy installation. The
special lock prevents slipping of the panel. No
fasteners are visible after proper installation.
Installation manuals or hands-on training via
seminars are available through ATAS. Visit
www.atas.com for more information.

6. AVAILABILITY & COST

Availability:

Wind-Lok sot panels are readily available
through ATAS product distributors. A
complete line of related components and
trim accessories is available to complete
the project. Flat sheet and/or coil stock in
matching color is available for fabrication
of related components by the installing
contractor.

Cost:

Contact ATAS product distributors for current
pricing.

7. WARRANTY

Products coated with a uoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF nish carry
a thirty (30) year limited warranty against
cracking, peeling, chalking and fading.

8. MAINTENANCE

Wind-Lok Sot panels are virtually
maintenance free. Surface residue may be
easily removed by conventional cleaning
methods. Minor scratches may be touched
up with a matching paint, available from the
manufacturer.

9. TECHNICAL SERVICES

Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.

10. FILING SYSTEM

• www.construction.com

• www.atas.com

• Additional product information is available

from the manufacturer upon request.

⁄”

TM

Wind-Lok

is a trademark of ATAS International, Inc.
KYNAR 500® is a registered trademark of Arkema.
HYLAR 5000® is a registered trademark of Solvay Solexis, Inc.
© 2009 ATAS International, Inc. LRD0909 LAT754