ATAS MFR160 User Manual
ATAS INTERNATIONAL, INC.
SPECIFICATION DATA SHEET
1. PRODUCT NAME
RIGID-WALL PANEL
MFR160
2. MANUFACTURER
ATAS INTERNATIONAL, INC.
website: www.atas.com
email: info@atas.com
Corporate Headquarters:
Allentown, PA 18106
Phone: (610) 395-8445
Fax: (610) 395-9342
Western Facility:
Mesa, AZ 85204
Phone: (480) 558-7210
Fax: (480) 558-7217
Southern Facility:
Maryville, TN 37801
Phone: (800) 468-1441
3. PRODUCT DESCRIPTION
Basic Uses:
Rigid-Wall is a 16” wide by ⁄” deep panel that
provides dramatic shadow lines with its 1
⁄” wide ribs. The system utilizes concealed
fasteners to oer uninterrupted vertical or
horizontal sight lines.
Composition & Materials:
Standard Oerings: Rigid-Wall panels are rollformed from .032, .040 and .050 Aluminum;
.032 clear anodized and bronze anodized
aluminum.
Special Oerings: 18, 20, 22, and 24 gauge
Metallic Coated Steel; 18, 20 and 22 gauge
Galvalume® Plus.
Sizes:
Rigid-Wall panels have a 16” wide nominal
coverage. Panel lengths are cut to customer
specications, with a minimum of 4’ and a
maximum of 30’.
Colors & Finishes:
A choice of 30 colors is available in a KYNAR
500® PVDF or HYLAR 5000® PVDF nish.
(Request color chart or chips).
4. TECHNICAL DATA
KYNAR 500® PVDF or HYLAR 5000® PVDF based
nishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005, ASTM D
1400, ASTM D 4138 or ASTM D 5796
Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance: ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich):
ASTM G 87 or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894 and ASTM D
5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G 23, ASTM G 151 or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance – ASTM D 4214
Cleveland Condensing Cabinet: ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide: ASTM D
1308, Procedure 7.2
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
Panel testing/ratings:
UL Fire resistance rating design numbers: See
www.ul.com, File R12113, or contact ATAS for
current listing.
Galvanized Steel: ASTM A 653
Galvalume® Plus Steel: ASTM A 792
Aluminum: ASTM B 209
Coil Coating: ASTM A 755
Field Tested and Approved.
Load Tables available upon request.
5. INSTALLATION
Installation manuals or hands-on training via
seminars are available through ATAS. Visit
www.atas.com for more information.
6. AVAILABILITY & COST
Availability:
Rigid-Wall panels are available through ATAS
product distributors. A complete line of related
components and trim accessories is available
to complete the wall system. In addition, a
complete line of rainware and perimeter roof
edge trims can be supplied by ATAS to
complement the wall system. Flat sheet and/
or coil stock is available in matching color
for fabrication of related components by the
installing contractor.
Cost:
Contact ATAS product distributors for current
pricing.
7. WARRANTY
Products coated with a uoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF nish carry
a thirty (30) year limited warranty against
cracking, peeling, chalking and fading.
8. MAINTENANCE
Rigid-Wall panels are virtually maintenance
free. Surface residue may be easily removed
by conventional cleaning methods. Minor
scratches may be touched up with a matching
paint, available from the manufacturer.
9. TECHNICAL SERVICES
Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.
10. FILING SYSTEM
• www.construction.com
• www.atas.com
• Additional product information is available
from the manufacturer upon request.
TM
Rigid-Wall
KYNAR 500® is a registered trademark of Arkema.
HYLAR 5000® is a registered trademark of Solvay Solexis, Inc.
© 2009 ATAS International, Inc. LRD0909 LAT744
is a trademark of ATAS International, Inc.
Loading...