ATAS FLL135, FLL175, FLL217 User Manual

ATAS INTERNATIONAL, INC.

13 1/2”, 17 1/2”, 21 3/4”

1”

Plank Ribs - Optional

SPECIFICATION DATA SHEET

1. PRODuCT NAmE

1” FIELD-LOk

Tm

PANEL

FLL135, FLL175, FLL217

2. mANuFACTuRER

ATAS INTERNATIONAL, INC.
website: www.atas.com
email: [e-mail]
Corporate Headquarters:
Allentown, PA 18106
Phone: [phone]
Fax: [phone]
Western Facility:
Mesa, AZ 85204
Phone: [phone]
Fax: [phone]
Southern Facility:
Maryville, TN 37801
Phone: [phone]

3. PRODuCT DESCRIPTION

Basic Uses:

1” Field-Lok is a mechanically seamed, double­locked non-structural panel ideally suited for
both straight and curved applications. This 1”
deep panel oers an economical alternative
to snap-on seams, while also maintaining the
exibility of being curved.

Composition & Materials:
Standard Oerings: 1” Field-Lok panels are

roll-formed from .032 Aluminum; 24 gauge
Metallic Coated Steel.
Special Oerings: 22 gauge Metallic Coated
Steel; 24 gauge 55% Al-Zn coated Steel with
acrylic coating; 16 or 20 oz. Copper.

Sizes:

The FLL panels have a 1” seam height and are
available in 13 ½” (FLL135), 17 ½” (FLL175), and
21 ¾” (FLL217) widths. Panel lengths are cut
to customer specications with a 4’ minimum
and a maximum to transportation limitations.
Curved and tapered panels are available.
Contact ATAS for specics.

Colors & Finishes:

A choice of 30 colors is available in aKYNAR
500® PVDF or HYLAR 5000® PVDF nish.
(Request color chart or chips).

4. TECHNICAL DATA

KYNAR 500® PVDF or HYLAR 5000® PVDF
nishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005, ASTM D
1400, ASTM D 4138 or ASTM D 5796

Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance: ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich): ASTM G 87
or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894 and
ASTM D 5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G 23, ASTM G 151 or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance: ASTM D 4214
Cleveland Condensing Cabinet: ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide: ASTM D
1308 Procedure 7.2
Flame Spread Rating: ASTM E 84
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
Panel testing/ratings:
Uplift: UL 580 Class 90; UL 1897
Impact Resistance: UL 2218
Air Inltration: ASTM E 283
Water Penetration: ASTM E 331
Galvanized Steel: ASTM A 653
55% Al-Zn coated Steel: ASTM A 792
Aluminum: ASTM B 209
Copper: ASTM B 370
Coil Coating: ASTM A 755
Field Tested and Approved.

5. INSTALLATION

Field seaming equipment is necessary to
install this panel. The seaming tool may
be rented from ATAS at a weekly rate. An
expansion clip is used to allow for thermal
movement. Optional factory sealant is
available. Installation manuals or hands-on
training via seminars are available through
ATAS. Visit www.atas.com for more information

6. AVAILABILITY & COST

Availability:

1” Field-Lok panels are readily available
through ATAS product distributors.

A complete line of related components and
trim accessories is available to complete
the roof system. Flat sheet and/or coil stock
in matching color are also available for
fabrication of related accessories by the
installing contractor.

Cost:

Contact ATAS product distributors for current
pricing.

7. WARRANTY

Products coated with a uoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF nish carry
a thirty (30) year limited warranty against
cracking, peeling, chalking and fading.

8. mAINTENANCE

1” Field-Lok panels are virtually maintenance
free. Surface residue may be easily removed
by conventional cleaning methods. Minor
scratches may be touched up with a matching
paint, available from the manufacturer.

9. TECHNICAL SERVICES

Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.

10. FILING SYSTEm

• www.construction.com

• www.atas.com

• Additional product information is available

from the manufacturer upon request.

TM

Field-Lok

is a trademark of ATAS International, Inc.
KYNAR 500® is a registered trademark of Arkema.
HYLAR 5000® is a registered trademark of Solvay Solexis, Inc.
© 2009 ATAS International, Inc. LRD0909 LAT713