ATAS BWK360 User Manual

ATAS INTERNATIONAL, INC.

36"

1½"

6"

SPECIFICATION DATA SHEET

1. PRODuCT NAmE

BELvEDERE

Tm

SHORT RIB PANEL

BWK360

2. mANuFACTuRER

ATAS INTERNATIONAL, INC.
Website: www.atas.com
Email: [e-mail]
Corporate Headquarters:
Allentown, PA 18106
Phone: [phone]
Fax: [phone]
Western Facility:
Mesa, AZ 85204
Phone: [phone]
Fax: [phone]
Southern Facility:
Maryville, TN 37801
Phone: [phone]

3. PRODuCT DESCRIPTION

Basic Uses:

Short Rib Panel is a 1 ½” deep ribbed panel
that features six broad low and six narrow high
cells. This panel can be installed vertically
or horizontally on walls and used for roong
applications.

Composition & Materials:

Standard Oerings: Short Rib Panel is roll­formed from .032 and .040 Aluminum; 24
gauge Metallic Coated Steel; 24 gauge 55% Al­Zn alloy Coated Steel with acrylic coating.
Special Oerings: 20 and 22 gauge Metallic
Coated Steel; 20 and 22 gauge 55% Al-Zn
alloy Coated Steel with acrylic coating may be
specied, subject to minimum quantities and
lead time.

Sizes:

Short Rib Panel has a 1 ½” high rib and is
36” wide. Panel lengths are cut to customer
specications, with a minimum of 6’-0” and
maximum to transportation limitations and/or
product and project design considerations.

Colors & Finishes:

A choice of 30 stock colors is available in a
KYNAR 500® PVDF or HYLAR 5000® PVDF nish.
(Request color chart or chips). Texture may be
smooth or stucco embossed, depending on
gauge. Panels can be solid or perforated.

4. TECHNICAL DATA

KYNAR 500® PVDF or HYLAR 5000® PVDF based
nishes tested by paint supplier for:
Dry Film Thickness: ASTM D 1005, ASTM D
1400, ASTM D 4138 or ASTM D 5796
Specular Gloss: ASTM D 523
Pencil Hardness: ASTM D 3363
T-Bend Flexibility: ASTM D 4145
Mandrel Bend Flexibility: ASTM D 522
Impact Resistance: ASTM D 2794
Adhesion: ASTM D 3359
Water Immersion Resistance: ASTM D 870
Abrasion Resistance: ASTM D 968
Acid Resistance: ASTM D 1308
Acid Rain Resistance (Kesternich):
ASTM G 87 or DIN 50018
Salt Spray: ASTM B 117
Cyclic Salt Spray: ASTM D 5894 and
ASTM D 5487
Humidity Resistance: ASTM D 2247
Accelerated Weathering: ASTM D 822 and
ASTM G 155, ASTM G 151 or ASTM G 153
Color Retention, Florida Exposure:
ASTM D 2244
Chalking Resistance – ASTM D 4214
Cleveland Condensing Cabinet: ASTM D 4585
Cure Test, MEK Resistance: ASTM D 5402
Alkali Resistance, Sodium Hydroxide: ASTM D
1308, Procedure 7.2
Organic coatings meet requirements of AAMA
2605 when applied to aluminum.
Panel testing/ratings:
UL Fire resistance rating design numbers: See
www.ul.com, File R12113, or contact ATAS for
current listing.
Galvanized Steel: ASTM A 653
55% Al-Zn alloy Coated Steel: ASTM A 792
Aluminum: ASTM B 209
Coil Coating: ASTM A 755
Field Tested and Approved.
Load Tables available upon request.

5. INSTALLATION

Installation is with direct fastening
methods. When used in roong applications
special practices and restrictions apply.
Recommended minimum slope is 1 1/2:12.
Installation manuals and hands-on training
via seminars are available through ATAS. Visit
www.atas.com for more information.

6. AvAILABILITY & COST

Availability:

Short Rib Panel is available through ATAS
product distributors. A complete line of related
components and trim accessories
is available to complete the wall system. In
addition, a complete line of rainware and
perimeter roof edge trims can be supplied
by ATAS to complement the wall system. Flat
sheet and/or coil stock is available in matching
color for fabrication of related components by
the installing contractor.

Cost:

Contact ATAS product distributors for current
pricing.

7. WARRANTY

Products coated with a uoropolymer, KYNAR
500® PVDF or HYLAR 5000® PVDF nish carry a
limited warranty against chalking and fading.

8. mAINTENANCE

The Short Rib Panel is virtually maintenance
free. Surface residue may be easily removed by
conventional cleaning methods. For painted
products, minor scratches should be touched
up with a matching paint, available from the
manufacturer.

9. TECHNICAL SERvICES

Complete technical information and literature
are available at www.atas.com. ATAS will assist
with design ideas and shop drawings.

10. FILING SYSTEm

• www.atas.com

• Additional product information is available

from the manufacturer upon request.

TM

Belvedere
KYNAR 500® is a registered trademark of Arkema.
HYLAR 5000® is a registered trademark of Solvay Solexis, Inc.
© ATAS International, Inc. LRD0213 LAT741

is a trademark of ATAS International, Inc.