Atak 9A700 Instruction Manual

9” PORTABLE TELEVISION

9A700

Ver 1.0

For technical assistance or troubleshooting

please call 1-855-994-2825 or visit www.sibrandssupport.com

INSTRUCTION MANUAL

MODEL: 9A700

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includ-

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

­paratus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury
from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.

15. WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or
Moisture.

shall be placed on the apparatus.

17. The mains plug or appliance coupler shall remain readily operable.

18. Use in outdoors: This TV is not designed for outdoors installation. Do not expose the TV to rain, as it may

become damaged.

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN

Safety:

TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS ARE INSIDE. REFER TO QUALIFIED
SERVICE TECHNICIAN ONLY.

intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s

Instruction: The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and servicing instructions in the literature accompanying the
appliance.

to constitute a risk of electric shock to the users.

9A700 - 2

Safety Instructions

Please read these instructions carefully.

This product complies with all applicable US federal safety requirements, as well as those of the Canadian
Standards Association.

1. Cleaning

Always unplug the TV before cleaning. Do not use liquid or aerosol cleaners. Use a soft, slightly damp cloth to
clean.

2. Water and Moisture

Do not use this TV near water. Avoid using this TV in an excessively damp environment.

3. Stand

This TV should always be placed on a solid, sturdy surface.

4. Ventilation

To prevent overheating, do not block or obstruct the vent openings on the TV’s back panel. Also, avoid placing this
TV in a confined area with poor air flow.

5. Power Sources

This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of
The type of power supply to your home, consult your electronics retailer or local power company.

6. Power Cord Polarization

This TV is equipped with a three-wire grounding type plug, a plug with a third (grounding) pin. As a safety feature, this
plug will only t into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician
to replace the obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

7. Power Cord Protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from
the TV.

8. Lightning

To protect the TV during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV from lightning
and power-line surges.

9A700 - 3

Safety Instructions

9. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the TV be sure the antenna or cable system is grounded so
as to provide some protection against voltage surges and built up static charges. Article 810 of the National Electri­cal Code (U.S. A.), ANSI / NFPA 70 provides information with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of anten­na-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Example of Grounding According to National
Electrical Code Instructions

NEC - National Electrical Code

10. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall on to power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

11. Overloading

12. Object and Liquid Entry

Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short-out

TV.

13. Servicing

Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or

14. Damage Requiring Service

a. If the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the TV has been exposed to rain or water.
d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjustment of other controls may result in damage and will

e. If the TV has been dropped or the cabinet has been damaged.
f. If the TV exhibits a distinct change in performance.

Ground Clamp

Antenna Lead in Wire

Antenna Discharge Unit
(NEC Section 810-20)

Grounding Conductor
(NEC Section 810-21)

Ground Clamps

Electric Service

Equipment

Power Service Grounding
Electrode System (NEC
Art 250, Part H)

9A700 - 4

Safety Instructions

15. Replacement Parts

16. Safety Check

Upon completion of any service or repairs to this TV, ask the service technician to perform safety checks to determine
whether the product is in proper operating condition.

17. Heat

The TV should be situated away from heat sources such as radiators, heat registers, stoves, or other products

NOTE TO CABLE / TV INSTALLER:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric

should be connected to the grounding system of the building, as close to the point of the cable entry as practical.

FCC REGULATORY INFORMATION:

This television has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen­tial installation. This television generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

electronic equipment, which can be determined by turning the television off and on, then the user is encouraged to try
to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and television.

- Connect the equipment into an outlet on a circuit different from that to which the television is connected.

- Consult your dealer or an experienced radio / TV technician for assistance.

’s

authority to operate the equipment.

guarantee that interference will not occur in a particular installation. If this television does cause interference to other

When replacement parts are required, be sure that only an authorized service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards and void any warranty.

9A700 - 5

Table of Contents

Important Safety Instructions .........................................................................................................................................2

Table of Contents ..........................................................................................................................................................6

Introduction ....................................................................................................................................................................7

8...................................................................................................................................................... yrettaB eht gnigrahC

Remote Control

Overview....... .................................................................................................................................................................9

TV Overview

01...................................................................................................................................................... ...............lenaP poT

Side Panels .................................................................................................................................................................11

Installation

TV Setup

Connect the Telescoping Antenna..................................................................................................................................12

Connect Digital Cable Box, Satellite Receiver, & DVD player with Composite cables (yellow, red, & white) ................12

Initial Setup Wizard .......................................................................................................................................................13

TV Channel Setup & Channel Auto Scan .....................................................................................................................20

Picture Settings

Contrast ........................................................................................................................................................................15

Brightness ....................................................................................................................................................................15

Color .............................................................................................................................................................................15

Tint ................................................................................................................................................................................15

Sharpness ....................................................................................................................................................................15

Color Temp. ..................................................................................................................................................................15

Audio Settings.............................................................................................................................................................16

Date & Time Settings ..............................................................................................................................................16

Setup Settings

Menu Languages ..........................................................................................................................................................17

Transparent ................................................................................................................................................................17

..................................................................................................................................................................17OSD Timeout

Closed Captions.........................................................................................................................................................17

Parental Control ........................................................................................................................................................18

Channel Settings

Favorite ........................................................................................................................................................................19

Show / Hide ..................................................................................................................................................................19

USB & microSD Playback.......................................... .............................................................................................21

Troubleshooting ........................................................................................................................................................22

9A700 - 6

Installing the Base ........................................................................................................................................................ 8

Introduction

What’s In The Box

The 9A700 package includes the following items. Save the carton & packing for future shipping

• Remote Control

• AC 100-240V~50/60Hz to DC 12V 0.8A Adapter

• 12V Auto / Boat Adapter / Charger

• Detachable Telescoping Antenna

• RF Coaxial Extension Cable

• Audio / Video Cable - 3.5mm to Three Female RCA (Red/White/Yellow) Jacks

• Pedestal Base

Charging the Battery

This portable tevelvision has a built-in rechargeable lithium-ion battery. The battery can be charged by either the
AC 100-240V to DC 12V Power Adapter or the 12V Auto / Boat Adapter.

Before using the television it is recommended to completely charge the battery by following the steps below.

Home Electrical Outlet Use:

1. Plug the supplied AC 100-240V to DC 12V Power Adapter Jack into the 12V DC Input (15).

2. Insert the wall plug of the Power Adapter into an electrical wall outlet.

3. The Power Indicator LED (7) will turn ON during charging.

4. Once the battery is fully charged the Power Indicator LED (7) will turn OFF.

Auto-Boat Outlet Use:

1. Plug the supplied 12V Auto-Boat Power Adapter Jack into the 12V DC Input (15).

2. Insert the car-boat outlet plug of the Power Adapter into a 12V car-boat outlet.

3. The Power Indicator LED (7) will turn ON during charging.

4. Once the battery is fully charged the Power Indicator LED (7) will turn OFF.

NOTE: A “LOW BATTERY!” message will flash on the TV screen when the battery needs to be charged.

9A700 - 7

NOTE: For the TV to Charge using the Auto / Boat Adapter / Charger, the TV must be turned OFF.

Installing the Base

9A700 - 8

1. Remove the two screws from the
top of the Extension Arm.

2. Locate the metal plate on the bottom
of the Extension Arm. Turn the Disc
below the metal plate counterclockwise
to create space between the disc & plate.

3. Slide the metal plate into the channel
on the rear of the TV. Secure the
Extension Arm to the rear of the TV by
turning the Disc clockwise.

4. Turn the TV Base upside-down and
locate the two small screw holes in the
opening at the bottom of the base.
Insert the two screws from Step 1 into
the holes using a magnetized phillips
head screwdriver or needle-nose
pliers.

5. Using a phillips head screwdriver
attach the TV Base to the Extension
Arm.

6. If necessary the Tilt & Helght of the
TV can be adjusted.

Adjust Tilt: Turn the Tilt Adjustment
Knob counterclockwise. Adjust the
Tilt angle of the TV. Turn the Tilt
Adjustment Knob clockwise to lock.

Adjust Height: Turn the round Disc
between the TV and the extension arm
counterclockwise. Slide the TV Base
up or down the Channel on the rear of
the TV. Turn the round disc clockwise
to lock.

Remove Screws

Turn Disc counter­clockwise

Channel

Insert Screws

Attach Base to
Exension Arm

Tilt Adjustment
Knob

Loosen Disc to
Adjust Height

Extension Arm