ASYST Shinko VEHICLEMCOM User Manual

System operation manual
of Vehicle Communication Unit
MCOM
AD-03-0218
The information furnished herein by ASYST SHINKO, INC. is proprietary and confidential to
ASYST SHINKO, INC. personnel and is not to be duplicated, published, or disclosed to
any third party in whole or in part without permission from ASYST SHINKO, INC.
Copyright © 2002 ASYST SHINKO, INC. ALL RIGHTS RESERVED.
Unpublished rights reserved under the copyright laws of the United States.
ASYST-SHINKO,INC. AD-03-0218  Rev.0  Vehicle Communication Unit MCOM Operation Manual i
The information contained herein is provided pursuant to the terms of a License, Non-disclosure and/or Confidentiality Agreement and constitutes and contains valuable proprietary information and trade secrets of ASYST SHINKO, INC., embodying substantial creative efforts and confidential information, ideas, and expressions. Accordingly, strict compliance with the terms and conditions of the governing Agreement, including, without limitation, all restrictions on use and disclosure, is required as a condition to the use of the information contained herein. Except as may be permitted in the applicable Agreement, the information herein may not be reproduced or disclosed in whole or in part. Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph <c> (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.277-7013.
ASYST SHINKO, INC. 100 Takegahana, Ise city, Mie prefecture, 516-0005, Japan Telephone: +81-596-36-2335 Facsimile: +81-596-36-2162
ASYST-SHINKO,INC. AD-03-0218  Rev.0  Vehicle Communication Unit MCOM Operation Manual ii
Revision History
Rev.
0 Feb. 27, 2004 The first edition(Preliminary) M.Kuroda 1
Monthly/Day/Year
Description Author
ASYST-SHINKO,INC. AD-03-0218  Rev.0  Vehicle Communication Unit MCOM Operation Manual iii
Contents
1. Introduction
1.1. Application.................................................................................................................... 1
1.2. Related Rules, Laws................................................................................................1
1.3. Abbreviations............................................................................................................... 1
2. Safety
2.1. Alert Boxes................................................................................................................... 2
2.1.1. General................................................................................................................................2
2.1.2. Definitions of DANGER, WARNING and CAUTION................................2
2.1.3. Precautions on use......................................................................................................3
2.1.4. Storage................................................................................................................................3
2.1.5. Installation..........................................................................................................................4
2.1.6. Maintenance and Inspection..................................................................................4
........................................................................................2
3. Outline of the Vehicle communication unit MCOM
3.1. Overview....................................................................................................................... 5
3.2. MCOM configuration................................................................................................ 6
................................................................................1
.....................5
3.3. Function of each unit................................................................................................ 8
3.3.1. M-COM2 (Printed circuit board ) ........................................................................................8
3.3.2. COM-TR (power line COmmunication TRansformer)........................................................9
3.3.3. IND-TR (INDuction line communication TRansformer).......................................................9
3.4. FCC standard............................................................................................................ 11
3.5. Control/modulating of communication............................................................. 12
3.5.1. Power line communication.....................................................................................12
3.5.2. Induction line communication..............................................................................13
4. Specification
4.1. Input/Output............................................................................................................... 14
4.2. Specification.............................................................................................................. 16
4.2.1. M-COM2...........................................................................................................................16
4.2.2. CMC-TR............................................................................................................................16
4.2.3. IND-TR...............................................................................................................................16
5. Error process
............................................................................14
...........................................................................17
6. Cautions on Use
ASYST-SHINKO,INC. AD-03-0218  Rev.0  Vehicle Communication Unit MCOM Operation Manual iv
......................................................................18
1. Introduction
1.1. Application
This document describes the operation of communication unit for transport system, OHT, OHS, etc.
1.2. Related Rules, Laws
FCC part 15 subpart C
1.3. Abbreviations
(1) MCOM: Merge/diverge Communication Modem (2) COM-TR: power line Communication Transformer (3) IND-TR: INDuction line communication Transformer (4) CMC : Communication Modem Controller (5) CMC-BM: Communication Modem Controller Base Modem (6) CMC-BC: Communication Modem Controller Base Controller (7) CMC-TR: Communication Modem Controller TRansformer
Introduction
ASYST-SHINKO,INC.AD-03-0218 Rev.0Vehicle Communication Unit MCOM Operation Manual 1
Safety
2. Safety
2.1. Alert Boxes
2.1.1. General
(1) Read and understand fully this manual and attached documents before operating the
products. (2) Engage specialists in electrical and mechanical works. (3) Don’t improve the product by yourselves. (4) Be sufficiently proficient with the equipment, the relevant safety knowledge and the
precautions prior to using this product.
In the content of this “Safety Precautions ”, items which need to be alert shall be classified into “DANGER”, “WARNING” and ”CAUTION”.
2.1.2. Definitions of DANGER, WARNING and CAUTION
DANGER: An imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING: A potentially hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION: A potentially hazardous situation which, if not avoided, may result in
minor or moderate injury. [Note 1]
Medium degree of injuries or light injuries refers to injuries, e.g., burns and electric shock, which do not require hospitalization of or prolonged hospital visit by the victims. As material losses refers to expanded losses pertaining to the damage of property and equipment.
[Note 2]
Depending on the situation, the events described under “WARNING” may also result in severe outcome. In either case, make sure that the advice is followed.
After reading, make sure this information shall be kept at places where it can always be read by users.
ASYST-SHINKO,INC.AD-03-0218 Rev.0Vehicle Communication Unit MCOM Operation Manual 2
2.1.3. Precautions on use
Safety
Follow the following advice strictly to avoid electric shock or burns.
1. Only those who received training for maintenance and teaching can do maintenance and teaching.
2. Don’t break the cable, impose excessive stress, place heavy weights, or pinch it between items. Doing so may cause electric shock.
1. Don’t use the equipment at locations where water, corrosive atmosphere, or flammable gas is present, or beside flammable items. Doing so may cause life and fails.
2.1.4. Storage
DANGER
WARNING
PROHIBITION
1. Don’t store the equipment at locations where it is subject to rain, ater
MANDATORY ACTION
hazardous gas or liquid.
1. Store the equipment at locations in not subjected to sunshine. Store it at predetermined relative humidity and temperature. 0 degrees C. ­50 degrees C., 90% RH and below, no dew.
ASYST-SHINKO,INC.AD-03-0218 Rev.0Vehicle Communication Unit MCOM Operation Manual 3
Loading...
+ 15 hidden pages