ASUSTeK Computer K00E Users Manual

support.asus.com
K00E
user manual
Charging your device
Ensure to fully charge your ASUS Tablet before using it in battery mode for extended periods. Remember that the power adapter charges your ASUS Tablet as long as it is plugged into an AC power source. Be aware that it takes much longer to charge the ASUS Tablet when it is in use.
IMPORTANT! Do not leave the ASUS Tablet connected to the power supply once it is fully charged. ASUS Tablet is not designed to be left connected to the power supply for extended periods of time.
Airplane precautions
Contact your airline provider to learn about related inight services that can be used and restrictions that must be followed when using your ASUS Tablet in-ight.
IMPORTANT! You can send your ASUS Tablet through x-ray machines (used on items placed on conveyor belts), but do not expose them from magnetic detectors and wands.
Safety precautions
This ASUS Tablet should only be used in enviroments with ambient temperatures between 0°C (32°F) and 35°C (95°F).
Long time exposure to extremely high or low temperature may quickly deplete and shorten the battery life. To ensure the battery’s optimal performance, ensure that it is exposed within the recommended environment temperature.
DRAFT v2
Package contents
Power adapter
DRAFT v2
ASUS Tablet
Micro SIM card tray eject pin
DRAFT v2
Micro USB cable
NOTES:
• If any of the items is damaged or missing, contact your retailer.
The bundled power adapter varies with country or region.
ASUS Tablet
Technical documentations and
warranty card
3
DRAFT v2
Your ASUS Tablet
Front view
DRAFT v2
4
1.2-Megapixel front camera
Audio speaker
Proximity sensor
Ambient light sensor
Touch screen panel
Audio speaker
ASUS Tablet
DRAFT v2
Rear view
DRAFT v2
5-Megapixel rear camera
Power button
Volume button
MicroSD card slot*
Speaker/Headset port
DRAFT v2
* The microSD card slot supports microSD, microSDHC, and microSDXC card formats. ** The micro SIM card slot supports WCDMA and GSM network bands.
ASUS Tablet
Microphone
MicroSIM card slot**
DRAFT v2
Microphone Micro USB 2.0 port
5
DRAFT v2
Charging your ASUS Tablet
To charge your ASUS Tablet:
Connect the micro USB cable to the power adapter.
Plug the micro USB connector into your ASUS Tablet.
DRAFT v2
Plug the power adapter into a grounded power outlet.
Charge your ASUS Tablet for eight (8) hours before using it in battery mode for the rst time.
DRAFT v2
6
ASUS Tablet
DRAFT v2
IMPORTANT!
• Use only the bundled power adapter and micro USB cable to charge your ASUS Tablet. Using a dierent power adapter may damage your ASUS Tablet.
Peel the protective lm o from the power adapter and micro USB cable before charging the ASUS Tablet to prevent risk or injury.
Ensure that you plug the power adapter to the correct power outlet with the correct input rating. The output voltage of this adapter is DC 5.2V, 1.35A.
When using your ASUS Tablet while plugged-in to a power outlet, the grounded power outlet must be near the unit and easily accessible.
NOTES:
• Your ASUS Tablet can be charged via the USB port on a computer only when it is in sleep mode (screen o) or turned
DRAFT v2
o.
Charging through a USB port of a computer may take longer time to complete.
If your computer does not provide enough power for charging your ASUS Tablet, charge your ASUS Tablet via the grounded power outlet instead.
DRAFT v2
ASUS Tablet
7
DRAFT v2
Installing a micro SIM card
Before you can make calls, send text messages, or connect to a mobile broadband network using your ASUS Tablet, you need to install a micro SIM (Subscriber Identity Module) card.
To install a micro SIM card:
1. Insert the tip of the bundled micro SIM card tray eject pin to eject the micro SIM card tray.
2. Pull out the micro SIM card tray and place the micro SIM
DRAFT v2
card on the tray with the metal contacts facing up, as shown.
Metal contacts
DRAFT v2
8
ASUS Tablet
DRAFT v2
3. Align and insert the micro SIM card tray back to the slot.
DRAFT v2
DRAFT v2
ASUS Tablet
9
DRAFT v2
Appendices
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
DRAFT v2
in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by doing one or more of the following measures:
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent
• from that to which the receiver is connected.
10
ASUS Tablet
DRAFT v2
DRAFT v2
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co­located or operating in conjunction with any other antenna or transmitter.
Operation on the 5.15-5.25 GHz frequency band is restricted for indoor use only. The FCC requires indoor use for the 5.15-5.25 GHz band to reduce the potential for harmful interference to co-channel Mobile Satellite Systems. It will only transmit on
5.25-5.35 GHz, 5.47-5.725 GHz and 5.725-5.850 GHz bands
when associated with an access point (AP).
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure
DRAFT v2
to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specied power level in dierent channels. The highest SAR value for the device as reported to the FCC is
1.19 W/kg .
DRAFT v2
ASUS Tablet
11
DRAFT v2
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on le with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: MSQK00E.
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. CAN ICES-3(B)/ NMB-3(B)
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The IC ID for this device is 3568A-K00E.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below
DRAFT v2
the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
This device has been evaluated for and shown compliant with the IC Specic Absorption Rate (“SAR”) limits when installed in specic host products operated in portable exposure conditions.
DRAFT v2
12
ASUS Tablet
DRAFT v2
Canada’s REL (Radio Equipment List) can be found at the following web address:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch. do?lang=eng
Additional Canadian information on RF exposure also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
Canada, avis d’Industrie Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement. L’identifiant IC de cet appareil est 3568A-K00E.
DRAFT v2
Informations concernant l’exposition aux fréquences radio (RF)
La puissance de sortie émise par cet appareil sans l est inférieure à la limite d’exposition aux fréquences radio d’ Industrie Canada (IC). Utilisez l’appareil sans l de façon à minimiser les contacts humains lors du fonctionnement normal.
Ce périphérique a été évalué et démontré conforme aux limites SAR (Specic Absorption Rate – Taux d’absorption spécique) d’ IC lorsqu’il est installé dans des produits hôtes particuliers qui fonctionnent dans des conditions d’exposition à des appareils portables.
ASUS Tablet
DRAFT v2
13
DRAFT v2
Ce périphérique est homologué pour l’utilisation au Canada. Pour consulter l’entrée correspondant à l’appareil dans la liste d’équipement radio (REL - Radio Equipment List) d’Industrie Canada rendez-vous sur:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch. do?lang=eng
Pour des informations supplémentaires concernant l’exposition aux RF au Canada rendez-vous sur :
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
IC Warning Statement
The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.
The device for the band 5150-5250 MHz is only for indoor usage
DRAFT v2
to reduce potential for harmful interference to co-channel mobile satellite systems; the maximum antenna gain permitted (for device in the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the EIRP limit; and the maximum antenna gain permitted (for devices in the band 5275-5850 MHz) to comply with the EIRP limits specied for point-to-point and non point­to-point operation as appropriate, as stated in section A9.2(3). In addition, high-power radars are allocated as primary users (meaning they have priority) of the band 5250-5350 MHz and this radar could cause interference and/or damage to LE-LAN devices.
DRAFT v2
14
ASUS Tablet
DRAFT v2
The Country Code Selection feature is disabled for products marketed in the US/Canada. For product available in the USA/ Canada markets, only channel 1-11 can be operated. Selection of other channels is not possible.
EC Declaration of Conformity
This product is compliant with the regulations of the R&TTE Directive 1999/5/EC. The Declaration of Conformity can be downloaded from http://support.asus.com.
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission
DRAFT v2
or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
ASUS Tablet
DRAFT v2
15
DRAFT v2
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high volume levels for long periods.
DRAFT v2
For France, headphones/earphones for this device are compliant with the sound pressure level requirement laid down in the applicable EN 50332-1:2000 and/or EN50332-2:2003 standard required by French Article L.5232-1.
DRAFT v2
16
ASUS Tablet
DRAFT v2
CE Mark Warning
0682
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.
The highest CE SAR value for the device is 1.4 W/Kg.
This equipment may be operated in:
AT BE BG CH CY CZ DE DK EE ES FI FR GB GR HU IE IT IS LI LT LU LV MT NL NO PL PT RO SE SI SK TR
DRAFT v2
DFS controls related to radar detection shall not be accessible to the user.
This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
DRAFT v2
ASUS Tablet
17
DRAFT v2
RF Exposure information (SAR) - CE
This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic elds by way of health protection.
The limits are part of extensive recommendations for the protection of the general public. These recommendations have been developed and checked by independent scientic organizations through regular and thorough evaluations of scientic studies. The unit of measurement for the European Council’s recommended limit for mobile devices is the “Specic Absorption Rate” (SAR), and the SAR limit is 2.0 W/Kg averaged over 10 gram of body tissue. It meets the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP).
For next-to-body operation, this device has been tested and meets the ICNRP exposure guidelines and the European Standard EN 62311 and EN 62209-2. SAR is measured with the device directly contacted to the body while transmitting at the
DRAFT v2
highest certied output power level in all frequency bands of the mobile device.
DRAFT v2
18
ASUS Tablet
DRAFT v2
Power Safety Requirement
Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to: H05VV-F, 3G, 0.75mm2 or H05VV-F, 2G, 0.75mm2.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in dierent regions.
Coating notice
IMPORTANT! To provide electrical insulation and maintain
electrical safety, a coating is applied to insulate the device
DRAFT v2
except on the areas where the I/O ports are located.
Green ASUS notice
ASUS is devoted to creating environment-friendly products and packaging to safeguard consumers’ health while minimizing the impact on the environment. The reduction of the number of the manual pages complies with the reduction of carbon emission. For the detailed user manual and related information, refer to the user manual included in the ASUS Tablet or visit the ASUS Support Site at http://support.asus.com/.
DRAFT v2
ASUS Tablet
19
DRAFT v2
Complies with
IDA Standards
DB103778
Regional notice for Singapore
This ASUS product complies with IDA Standards.
Proper disposal
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.
DO NOT throw the ASUS Tablet in municipal
DRAFT v2
20
waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the ASUS Tablet in re. DO NOT short circuit the contacts. DO NOT disassemble the ASUS Tablet.
DRAFT v2
ASUS Tablet
DRAFT v2
Copyright Information
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translate into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS and ASUS Tablet logo are trademarks of ASUSTek Computer Inc.
Information in this document is subject to change without notice.
Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved.
Model name: K00E (ME372CG)
DRAFT v2
Manufacturer ASUSTek COMPUTER INC. Address, City 4F, No. 150, LI-TE RD., PEITOU,
Country TAIWAN Authorized
Representative in Europe
Address, City HARKORT STR. 21-23, 40880 RATINGEN Country GERMANY
ASUS Tablet
TAIPEI 112, TAIWAN
ASUS COMPUTER GmbH
DRAFT v2
21
FCC/CE Doc page
15060-XXXXXXXX
Loading...