ASUSTeK Computer EK1542 Users Manual

Adding Bluetooth devices

You may use peripherals such as a Bluetooth printer, or mouse with your
EeeKeyboard PC.

To add other Bluetooth-enabled devices:

1. Using an external mouse, right-click on the Bluetooth icon on

the Windows® taskbar, and select Add a Bluetooth Device. The
Bluetooth Setup Wizard appears.

2. Click Next to start searching for other Bluetooth devices.

3. From the list of available Bluetooth devices, select the device you
want to use with your EeeKeyboard PC, then click Next.

4. Select Don’t use a passkey and click Next to add the device.

5. Click Finish when done.

3-12

Chapter 3: Getting connected

Appendices

Notices

REACH

Complying with the REACH (Registration, Evaluation, Authorisation,
and Restriction of Chemicals) regulatory framework, we published the
chemical substances in our products at ASUS REACH website at http://
green.asus.com/english/REACH.htm.

Federal Communications Commission
Statement

This device complies with FCC Rules Part 15. Operation is subject to the
following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, including
interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the Federal Communications
Commission (FCC) rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:

4-1

4-2

Appendices

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of a shielded-type power cord is required in order to
meet FCC emission limits and to prevent interference to the
nearby radio and television reception. It is essential that only
the supplied power cord be used. Use only shielded cables
to connect I/O devices to this equipment. You are cautioned
that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to
operate the equipment.

(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993.
Washington DC: Office of the Federal Register, National Archives and
Records Administration, U.S. Government Printing Office.)

FCC Radio Frequency Interference Requirements

This device is restricted to INDOOR USE due to its operation in the

5.15 to 5.25GHz frequency range. FCC requires this product to be used

indoors for the frequency range 5.15 to 5.25GHz to reduce the potential
for harmful interference to co-channel of the Mobile Satellite Systems.
High power radars are allocated as primary user of the 5.25 to 5.35GHz
and 5.65 to 5.85GHz bands. These radar stations can cause interference
with and / or damage this device.

This device and its antenna(s) must not be co-located or
operating in conjunction with any other antenna or transmitter.