Asus VX2 User Manual

Notebook PC

Hardware User’s Manual

E2989 / Jan 2007

Contents

Modem Connection �� 53 Network Connection ��54 Wireless LAN Connection (on selected models) ��55 Intel PROSet (3945) Wireless LAN (on selected models) �� 56 ASUS Wireless LAN (on selected models) �� 57 Windows Wireless Network Connection �� 58 Bluetooth Wireless Connection (on selected models) �� 59

Power Management Modes�� 60

Full Power Mode & Maximum Performance �� 60 ACPI��60 Suspend Mode �� 60 Power Savings �� 60 Power State Summary �� 61 Thermal Power Control �� 61 Stand by and Hibernate �� 62

Fingerprint Scanner �� 63

Fingerprint Login �� 64 Trusted Platform Module (TPM) (on selected models) �� 65

(continued on next page)

3

Contents

Table of Contents (Cont.)

Appendix

Optional Accessories Optional Connections Operating System and Software Common Problems and Solutions System Recovery Partition System Recovery CDs (on selected models) NTFS Converter Glossary Declarations and Safety Statements Notebook PC Information

4

1. Introducing the Notebook PC

About This User’s Manual Notes For This Manual Safety Precautions Preparing your Notebook PC

5

1 Introducing the Notebook PC

About This User’s Manual

You are reading the Notebook PC User’s Manual. This User’s Manual provides information on the various components in the Notebook PC and how to use them. The following are major sections of this User’s Manuals:

1. Introducing the Notebook PC

Introduces you to the Notebook PC and this User’s Manual.

2. Knowing the Parts Gives you information on the Notebook PC’s components.

3. Getting Started

Gives you information on getting started with the Notebook PC.

4. Using the Notebook PC Gives you information on using the Notebook PC’s components.

5. Appendix Introduces you to optional accessories and gives additional information.

Notes For This Manual

A few notes and warnings in bold are used throughout this guide that you should be aware of in order to complete certain tasks safely and completely. These notes have different degrees of importance as described below:

NOTE: Tips and information for special situations.

TIP: Tips and useful information for completing tasks.

IMPORTANT! Vital information that must be followed to prevent damage to data, components, or persons.

WARNING! Important information that must be followed for safe operation.

< >

Text enclosed in < > or [ ] represents a key on the keyboard; do not actually type the < > or [ ] and the enclosed letters.

[ ]

6

Introducing the Notebook PC 1

Safety Precautions

The following safety precautions will increase the life of the Notebook PC. Follow all precautions and

instructions. Except as described in this manual, refer all servicing to qualied personnel. Do not use damaged power cords, accessories, or other peripherals. Do not use strong solvents such as thinners,

benzene, or other chemicals on or near the surface.

IMPORTANT! Disconnect the AC power and remove the battery pack(s) before cleaning. Wipe the Notebook PC using a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water and remove any extra moisture with a dry cloth.

DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.

DO NOT press or touch the display

panel. Do not place together with

small items that may scratch or enter the Notebook PC.

DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.

DO NOT leave the Notebook PC on your lap or any part of the body in order to prevent discomfort or injury from heat exposure.

SAFE TEMP: This Notebook PC should only be used in environments with ambient temperatures between 5°C (41°F) and 35°C (95°F)

DO NOT throw the Notebook PC in municipal waste. Check local regulations for disposal of electronic products.

DO NOT place or drop objects on top and do not shove any foreign objects into the Notebook PC.

DO NOT expose to strong magnetic

or electrical elds.

DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during an electrical storm.

Battery safety warning: DO NOT throw the battery in re. DO NOT short circuit the contacts. DO NOT disassemble the battery.

INPUT RATING: Refer to the rating

label on the bottom of the Notebook PC and be sure that your power adapter complies with the rating.

DO NOT carry or cover a Notebook PC that is powered ON with any materials that will reduce air circulation such as a carrying bag.

7

1 Introducing the Notebook PC

Transportation Precautions

To prepare the Notebook PC for transport, you should turn it OFF and disconnect all external peripherals to prevent damage to the connectors. The hard disk drive’s head retracts when the power is turned

OFF to prevent scratching of the hard disk surface during transport. Therefore, you should not transport the Notebook PC while the power is still ON. Close the display panel and check that it is latched securely in the closed position to protect the keyboard and display panel.

CAUTION: The Notebook PC’s surface is easily dulled if not properly cared for. Be careful not to rub or scrape the Notebook PC surfaces.

Cover Your Notebook PC

Purchase a carrying bag to protect the Notebook PC from dirt, water, shock, and scratches.

Charge Your Batteries

If you intend to use battery power, be sure to fully charge your battery pack and any optional battery packs before going on long trips. Remember that the power adapter charges the battery pack as long as it is plugged into the computer and an AC power source. Be aware that it takes much longer to charge the battery pack when the Notebook PC is in use.

Airplane Precautions

Contact your airline if you want to use the Notebook PC on the airplane. Most airlines will have restrictions for using electronic devices. Most airlines will allow electronic use only between and not during takeoffs and landings.

CAUTION! There are three main types of airport security devices: X-ray machines (used on items placed on conveyor belts), magnetic detectors (used on people walking through security checks), and magnetic wands (hand-held devices used on people or individual items). You can send your Notebook PC and diskettes through airport X-ray machines. However, it is recommended that you do not send your Notebook PC or diskettes through airport magnetic detectors or expose them to magnetic wands.

8

Introducing the Notebook PC 1

2

1

3

1.3

MEGA PIXELS

Preparing your Notebook PC

These are only quick instructions for using your Notebook PC. Read the later pages for detailed information on using your Notebook PC.

1. Install the battery pack

2. Connect the AC Power Adapter

3. Open the Display Panel 4. Turn ON the Notebook PC

IMPORTANT! When opening, do not force the display panel down to the table or else the hinges may break! Never lift the Notebook PC by the display panel!

Press the power button and release.

(In Windows XP, this button can also be used to safely turn OFF the Notebook PC.)

9

1 Introducing the Notebook PC

10

2. Knowing the Parts

Basic sides of the Notebook PC

NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.

11

2 Knowing the Parts

2

1

11

12

9

3

6

5

4

7

8

10

2

Front

Back

Top Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

NOTE: The keyboard will be different for each territory.

Camera Indicator

The camera indicator shows when the built-in camera is in use. The camera may be auto-activated by supported software.

Multi-Position Camera

The built-in camera allows picture taking or video recording. Can be used with video conferencing and other interactive applications.

CAUTION: The lens can be adjusted facing forward or facing back-

ward but the lens can only ip through the bottom. Do not rotate the lens upward past 35 degrees.

12

Knowing the Parts 2

3

4

5

7

8

9

10

11

12

6

Microphone (Built-in)

The built-in mono microphone can be used for video conferencing, voice narrations, or simple audio recordings.

Display Panel

The display panel functions the same as a desktop CRT monitor. The Notebook PC uses an active

matrix TFT LCD, which provides excellent viewing like that of desktop monitors. Unlike desktop CRT monitors, the LCD panel does not produce any radiation or ickering, so it is easier on the eyes.

Use a soft cloth without chemical liquids (use plain water if necessary) to clean the display panel.

Instant Keys

Instant keys allow you to launch frequently used applications with one push of a button. Details are described in section 3.

Power Switch

The power switch allows powering ON and OFF the Notebook PC and recovering from STD.

Use the switch once to turn ON and once to turn OFF the Notebook PC. In Windows XP, this button can also be used to safely turn OFF the Notebook PC. The power switch only works when the display panel is opened.

Audio Speakers

The built-in stereo speaker system allows you to hear audio without additional attachments. The multimedia sound system features an integrated digital audio controller that produces rich, vibrant sound (results improved with external stereo headphones or speakers). Audio features are software controlled.

Keyboard

The keyboard provides full-sized keys with comfortable travel (depth at which the keys can be depressed) and palm rest for both hands. Two Windows function keys are provided to help ease navigation in the Windows operating system.

Touchpad and Buttons

The touchpad with its buttons is a pointing device that provides the same functions as a desktop mouse. A software-controlled scrolling function is available after setting up the included touchpad utility to allow easy Windows or web navigation.

Fingerprint Scanner

The ngerprint scanner allows use of security software using your ngerprint as your identication key.

Status Indicators (front)

Status indicators represent various hardware/software conditions. See indicator details in section 3.

Status Indicators (top)

Status indicators represent various hardware/software conditions. See indicator details in section 3.

13

2 Knowing the Parts

1

CD/DVD

1 32

7

5

4

6

9

8

10

Bottom Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

NOTE: The bottom side may vary in appearance depending on model.

NOTE: The battery pack size will vary depending on model.

WARNING! The bottom of the Notebook PC can get very hot. Be careful when handling the Notebook PC while it is in operation or recently been in operation. High temperatures are normal during charging or operation. Do not use on soft surfaces such as beds or sofas which may block the vents. DO NOT PUT THE NOTEBOOK PC ON YOUR LAP OR OTHER PARTS OF THE BODY TO AVOID INJURY FROM THE HEAT.

Battery Lock - Spring

The spring battery lock is used to keep the battery pack secured. When the battery pack is inserted, it will automatically lock. To remove the battery pack, this spring lock must be held in the unlocked position.

14

Knowing the Parts 2

2

3

4

8

6

7

5

10

9

Battery Pack

The battery pack is automatically charged when the Notebook PC is connected to an AC power source and maintains power to the Notebook PC when AC power is not connected. This allows use when

moving temporarily between locations. Battery time varies by usage and by the specications for this

Notebook PC. The battery pack cannot be disassembled and must be purchased as a single unit.

Battery Lock - Manual

The manual battery lock is used to keep the battery pack secured. Move the manual lock to the unlocked position to insert or remove the battery pack. Move the manual lock to the locked position after inserting the battery pack.

Power Station Connector

The Power Station connector allows the Notebook PC to interface with the optional Power Station.

Hard Disk Drive Compartment

The hard disk drive is secured in a compartment. Visit an authorized service center or retailer for information on hard disk drive upgrades for your Notebook PC. Only purchase hard disk drives from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability.

CD/

Optical Drive Module

DVD

The Notebook PC has an upgradeable optical drive module. Visit an authorized dealer for upgrades.

Module Lock

The Notebook PC has a user replaceable module. Visit an authorized dealer for compatible modules for this Notebook PC.

Memory (RAM) Compartment

The memory compartment provides expansion capabilities for additional memory. Additional memory will increase application performance by decreasing hard disk access. The BIOS automatically detects

the amount of memory in the system and congures CMOS accordingly during the POST (Power-On-

Self-Test) process. There is no hardware or software (including BIOS) setup required after the memory is installed. Visit an authorized service center or retailer for information on memory upgrades for your Notebook PC. Only purchase expansion modules from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability.

Shutdown Button (Emergency)

In case your operating system cannot properly turn OFF or restart, the shutdown button can be pressed with a straightened paper clip to shutdown the Notebook PC.

Cooling Fan

The cooling fan removes excess heat depending on temperature threshold settings.

IMPORTANT! Make sure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.

15

2 Knowing the Parts

2

3

4

1

5

1

2

3

5

4

6

7

8

9

ACON

2.0

Left Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

LAN Port

The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and supports a standard Ethernet cable for connection to a local network. The built-in connector allows convenient use without additional adapters.

TV-Out Port

The TV-Out port is an S-Video connector that allows routing the Notebook PC’s display to a television or video projection device. You can choose between simultaneously or single display. Use an S-Video cable (not provided) for high quality displays or use the provided RCA to S-Video adapter for standard video devices. This port supports both NTSC and PAL formats.

Display (Monitor) Output

The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor

or projector to allow viewing on a larger external display.

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.

m

-DVI

Display (DVI-D) Output

The Digital Video Interface port is designed to maximize video graphics output to at panel LCD monitors or other DVI-compliant device.

(Use the provided adapter to convert the m-DVI port to a standard DVI connector.)

16

Knowing the Parts 2

8

7

6

9

Optical Drive

The Notebook PC comes in various models with different optical drives. The Notebook

PC’s optical drive may support compact discs (CD) and/or digital video discs (DVD) and may have recordable (R) or re-writable (RW) capabilities. See the marketing specica-

tions for details on each model.

Optical Drive Activity Indicator (location varies by model)

The optical drive activity indicator shows when data is being transferred by the optical disk drive. This indicator will light in proportion to the data size transferred.

Optical Drive Electronic Eject

The optical drive eject has an electronic eject button for opening the tray. You can also eject the optical drive tray through any software player or by right clicking the optical drive in Windows™ “My Computer.”

Optical Drive Emergency Eject (location varies by model)

The emergency eject is used to eject the optical drive tray in case the electronic eject does

not work. Do not use the emergency eject in place of the electronic eject.

17

2 Knowing the Parts

2

3

1

1 2 3

6 874 5

9

Right Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

Flash Memory Slot

Normally a PCMCIA or USB memory card reader must be purchased separately in order to use memory cards from devices such as digital cameras, MP3 players, mobile

phones, and PDAs. This Notebook PC has a built-in memory card reader that can read many ash memory cards as specied later in this manual. The built-in memory card reader is

not only convenient, but also faster than most other forms of memory card readers because it utilizes the high-bandwidth PCI bus.

ExpressCard Slot

One 26pin Express card slot is available to support one ExpressCard/34mm or one ExpressCard/54mm expansion card. This new interface is faster by using a serial bus supporting USB 2.0 and PCI Express instead of the slower parallel bus used in the PC card slot. (Not compatible with previous PCMCIA cards.)

Infrared Port (IrDA) or E-SATA (depending on model)

Infrared Port (IrDA) (front side or right side depending on model)

The infrared (IrDA) communication port allows convenient wireless data communication with infrared-equipped devices or computers. This allows easy wireless synchronization with PDAs or mobile phones and even wireless printing to printers. If your ofce supports IrDA networking,

you can have wireless connection to a network anywhere provided there is a direct line of sight to

an IrDA node. Small ofces can use IrDA technology to share a printer between several closely placed Notebook PCs and even send les to each other without a network.

E-SATA

E-SATA Port

External SATA or eSATA allows external connection of Serial-ATA devices originally designed for use inside the computer. It is up to six times faster than existing USB 2.0, & 1394 for external storage solutions and is also hot pluggable using shielded cables and connectors up to two meters.

18

Knowing the Parts 2

4

5

6

7

8

9

2.0

SPDIF Output Jack

This jack provides connection to SPDIF (Sony/Philips Digital Interface) compliant devices for digital audio output. Use this feature to turn the Notebook PC into a hi- home

Combo

entertainment system.

Headphone Output Jack

The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to

amplied speakers or headphones. Using this jack automatically disables the built-in speakers.

Microphone Input Jack

The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signals from audio devices. Using this jack automatically disables the built-in microphone. Use this feature for video conferencing, voice narrations, or simple audio recordings.

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.

IEEE1394 Port

IEEE1394 is a high speed serial bus like SCSI but has simple connections and hotplugging capabilities like USB. The interface IEEE1394 has a bandwidth of 100-400 Mbits/sec and can handle up to 63 units on the same bus. IEEE1394 is also used in

high-end digital equipment and should be marked “DV” for Digital Video port.

Modem Port

The RJ-11 modem port with two pins is smaller than the RJ-45 LAN port and supports a standard telephone cable. The internal modem supports up to 56K V.90 transfers. The

built-in connector allows convenient use without additional adapters.

IMPORTANT! The built-in modem does not support the voltage used in digital phone systems. Do not connect the modem port to a digital phone system or else damage will occur to the Notebook PC.

Power (DC) Input

The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the Notebook PC and charges the internal battery pack. To prevent damage to the Notebook PC and battery pack, always use the supplied power adapter. CAUTION: MAY BECOME WARM TO HOT WHEN IN USE. BE SURE

NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.

19

2 Knowing the Parts

1

Front Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

Infrared Port (IrDA) (front side or right side depending on model)

The infrared (IrDA) communication port allows convenient wireless data communication with infrared-equipped devices or computers. This allows easy wireless synchronization with PDAs or mobile phones and even wireless printing to printers. If your ofce supports IrDA networking,

you can have wireless connection to a network anywhere provided there is a direct line of sight to

an IrDA node. Small ofces can use IrDA technology to share a printer between several closely placed Notebook PCs and even send les to each other without a network.

20

Knowing the Parts 2

21

1

2

Rear Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

Battery Pack

The battery pack is automatically charged when the Notebook PC is connected to an AC power source and maintains power to the Notebook PC when AC power is not connected. This allows use when moving temporarily between locations. Battery time varies by usage

and by the specications for this Notebook PC. The battery pack cannot be disassembled

and must be purchased as a single unit.

Kensington® Lock Port

The Kensington® lock port allows the Notebook PC to be secured using Kensington® compatible Notebook PC security products. These security products usually include a metal

cable and lock that prevent the Notebook PC to be removed from a xed object.

Some may also include a motion detector to sound an alarm when moved.

21

2 Knowing the Parts

1

2

Power Station (optional)

The optional Power Station allows quick connection and disconnection to all your desktop computer

peripherals. Dock your Notebook PC to expand its capabilities by emulating a powerful desktop computer when you are in your ofce or at home. Quickly detach your Notebook PC for instant portability.

IMPORTANT: Make sure the Power Station’s power adapter is connected and has power before docking the Notebook PC. (The Notebook PC’s own power adapter can be attached or removed.)

Docking the Notebook PC

(1) Set the front of the Notebook PC down rst.

(2) Align the triangular marks on the Notebook PC

and Power Station.

(3) Set the rear of the Notebook PC down and press

down as shown.

WARNING: When your Notebook PC is attached to the Power Station, never pickup the Notebook PC alone. Always pickup the entire assembly by the bottom of the Power Station.

22

Power Station (optional) Cont.

Ejecting the Notebook PC

While the Notebook PC is turned ON:

(1) Turn OFF or undock the Notebook PC. Make

(2) Press the Power Station Mechanical Eject But-

(3) Lift up the rear of the Notebook PC with both

Knowing the Parts 2

sure attached peripherals are not in use, press

the Dock/Undock Computer Button on the

Power Station or Undock in Windows. The Power Station docking indicator will blink

rst and then turn OFF. If Windows notify you

of a failure to undock, you must turn off the Notebook PC before ejecting from the Power Station.

ton.

hands.

IMPORTANT: If the Notebook PC enters hibernation while it is attached to the Power Station, do not eject it. Wake up the Notebook PC and Select “Undock Computer” from Windows “start” before ejecting it from the Power Station.

Undocking in Windows

While the Notebook PC is OFF or undocked:

(1) Press the eject button.

(2) Lift up the rear of the Notebook PC.

Make sure attached peripherals are not in use, then select Undock Computer from Windows start before ejecting the Notebook PC. If Windows notify

you of a failure to undock, you must turn off the Notebook PC before ejecting from the Power Station.

23

2 Knowing the Parts

3

4

5

1

5

2

1

3

4

2

5

Power Station (optional)

Top Side

Power Station Docking Indicator

The Power Station docking indicator lights when the Notebook PC is docked (by software) to the

Power Station. When the Notebook PC is undocked using the Dock/Undock Computer Button or Windows “Undock Computer” command, this indicator will blink rst and then turn OFF.

Dock/Undock Computer Button

While docked (Power Station Docking Indicator is ON): This is an electronic button to activate “Undock Computer” in Windows start. When undocking, the Power Station

Docking Indicator will blink rst and then turn OFF.

While undocked (Power Station Docking Indicator is OFF): This is an electronic button to “dock” the Notebook PC instead of having to remove and re-attach the Notebook PC to the Power Station.

Power Station Mechanical Eject Button

This is a mechanical (not electronic) button. Press this button rmly downwards to eject the

Notebook PC from the Power Station. Turn OFF the Notebook PC or make sure attached devices are not in use and “Undock Computer” is successful in Windows.

Power Station Connector

The Power Station connector locks the Notebook PC in place and allows the Power Station to interface with the Notebook PC.

Air Vents

The air vents allow cool air to enter and warm air to exit the Notebook PC.

IMPORTANT! Make sure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.

24

Knowing the Parts 2

1

2 3 4

1

4

2

3

2.0

Power Station (optional)

Left Side

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.

SPDIF Output Jack

This jack provides connection to SPDIF (Sony/Philips Digital Interface) compliant devices for digital audio output. Use this feature to turn the Notebook PC into a hi- home

entertainment system.

Headphone Output Jack

The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to

amplied speakers or headphones. Using this jack automatically disables the built-in speakers.

Microphone Input Jack

The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signals from audio devices. Using this jack automatically disables the built-in microphone. Use this feature for video conferencing, voice narrations, or simple audio recordings.

25

2 Knowing the Parts

1

2

3 5

4

6

7

8

2

3

1

4

5

2.0

Power Station (optional)

Rear Side

PS/2 Port

The PS/2 port is for connection to either an external PS/2 mouse or an external PS/2 keyboard.

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.

Power (DC) Input (Power Station)

The supplied power adapter converts AC power to DC power for use with

this jack. Power supplied through this jack supplies power to the Power Station, Notebook PC, and charges the Notebook PC’s battery pack. To prevent damage to the Power Station, Notebook PC, and battery pack, always use the supplied power adapter. CAUTION: MAY BECOME WARM TO HOT WHEN IN USE.

BE SURE NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.

The Power Station has its own power adapter.

LAN Port

The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and supports a standard Ethernet cable for connection to a local network. The built-in connector allows convenient use without additional adapters.

Serial Port

The 9-pin D-sub serial port supports native serial devices such as a serial drawing tablets, serial mouse, or serial modem. Serial devices have been slowly replaced by USB devices.

26

(continued on next page)

Knowing the Parts 2

6

7

8

Power Station (optional)

Rear Side (Cont.)

Parallel Port

The 25-pin D-sub parallel/printer port supports native parallel devices such as dot-

matrix/laser/inkjet printers, or parallel-adapted device such as external hard drives, removable drives, or scanners.

DVI

Display (DVI-D) Output (on selected models)

The Digital Video Interface port is designed to maximize video graphics output to at panel LCD monitors or other DVI-compliant device.

Display (Monitor) Output

The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor

or projector to allow viewing on a larger external display.

27

3 Getting Started

1

2

1

Power Station (optional)

Right Side

Power Station Eject Button

This is a mechanical (not electronic) button. Press this button rmly downwards to eject the

Notebook PC from the Power Station. Turn OFF the Notebook PC or make sure attached devices are not in use and “Undock Computer” is successful in Windows.

Kensington® Lock Port (Accessories)

The Kensington® lock port allows Notebook PC accessories to be secured using Kensington® compatible Notebook PC security products. These security products usually include a

metal cable and lock that prevent Notebook PC accessories to be removed from a xed

object. Some may also include a motion detector to sound an alarm when moved.

28

3. Getting Started

Using AC Power Using Battery Power Powering ON the Notebook PC Checking Battery Power Restarting or Rebooting Powering OFF the Notebook PC Special Keyboard Functions Switches and Status Indicators

29

3 Getting Started

Power System

Using AC Power

The Notebook PC power is comprised of two parts, the power adapter and the battery power system. The power adapter converts AC power from a wall

outlet to the DC power required by the Notebook

PC. Your Notebook PC comes with a universal

AC-DC adapter. That means that you may connect

the power cord to any 100V-120V as well as 220V240V outlets without setting switches or using

power converters. Different countries may require

that an adapter be used to connect the provided US-standard AC power cord to a different standard. Most hotels will provide universal outlets to support different power cords as well as voltages. It is always best to ask an experienced traveler about AC outlet voltages when bringing power adapters to another country.

TIP: You can buy travel kits for the Notebook PC that includes power and modem adapters for almost every country.

With the AC power cord connected to the AC-DC converter, connect the AC power cord to an AC outlet (preferably with surge-protection) and then connect the DC plug to the Notebook PC. Connecting the AC-DC adapter to the AC outlet rst allows you to test the AC outlet’s power and the AC-DC converter itself for compatibility problems before connecting the DC power to the Notebook PC. The power indi-

cator on the adapter (if available) will light if the power is within accepted ranges.

IMPORTANT! Damage may occur if you use a different adapter to power the Notebook PC or use the Notebook PC’s adapter to power other electrical devices. If there is smoke, burning scent, or extreme heat coming from the AC-DC adapter, seek servicing. Seek servicing if you suspect a faulty AC-DC adapter. You may damage both your battery pack(s) and the Notebook PC with a faulty AC-DC adapter.

NOTE: This Notebook PC may come with either a two or three-prong plug depending on territory. If a three-prong plug is provided, you must use a grounded AC outlet or use a properly grounded adapter to ensure safe operation of the Notebook PC.

WARNING! THE POWER ADAPTER MAY BECOME WARM TO HOT WHEN IN USE. BE SURE NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.

30