T
Service Overview
Chapter
Service Overview
Carefully read through this chapter for a look at various components of
the EPAD and necessary cautions and tools before performing any service
and repairs.
o provide the best service and support for the ASUS Vivo Tab RT TF600T, we have
provided the below information for technicians from distributors and resellers to
perform the complete EPAD TF600T disassembly and assembly. But before
performing the procedures, please be sure to read through the overview in this chapter
for component overview, cautions and tools to avoid any unwarranted damages to the EPAD
TF600T’s hardware.
The following chapter includes:
◆
EPAD TF600T Overview
◆
Components
◆
Service Overview
1-1 V1.0
3.5 Jack phone
Service Overview
EPAD TF600T Overview
The illustrations below show the EPAD TF600T’s overview.
O V E R V I E W
Micro HDIM
Micro SD Card
Overview
Reset Hole
Power Button
2M Camera
Microphone
Latch button
Volume Key
Virtual Windows Key
1 - 2
Service Overview
Overview
Tap to read or share info. by NFC
8M Camera with LED Flsh
BACK
Speaker
V1.0
1 - 3
L C D C O V E R
A S S Y
Service Overview
Components
The illustrations below show the components of the EPAD TF101.
LCD Cover Assy
The illustration below shows the LCD cover from its front side and back side.
L C D M O D U L E
B A T T E R Y
LCD Module
The illustration below shows the LCD module from its front side and back side.
Battery
The illustration below shows the battery.
V1.0
1 - 4
M A I N B O A R D
Main Board
Service Overview
The illustration below shows the main board from its front side and back side.
S P E A K E R
C A M E R A
M O D U L E
Speaker
The illustration below shows the Speaker.
Camera Module
The illustration below shows the Camera Module.
V1.0
1 - 5
Service Overview
Service Overview
Please pay special attention to the cautions below to prevent any damages to the EPAD
TF600T and also please be sure to select the appropriate tools described in this section to
perform any services desired.
P R E C A U T I O N S
Precautions
Before you perform any service and or repair on the EPAD TF600T, please follow the steps
below first.
1. Be sure that the EPAD TF600T is powered down.
2. Disconnect the AC plug from the EPAD TF600T.
3. Remove all rings, watches and any other metal objects from your hands.
4. Always wear a ground strap on your hand to protect the EPAD TF600T from static
discharge.
V1.0
1 - 6
H E A D
Service Overview
T O O L S
C R O S S
S C R E W
D R I V E R
T W E E Z E R S
P L A S C I T C
B L A D E
Appropriate Tools
The illustrations below show the appropriate tools that should be used for the EPAD
TF600T’s service and repair.
Phillips-head Screwdriver
Tweezers
Use a pair of tweezers to remove/insert cables.
Plastic Blade
V1.0
1 - 7
D I S A S S E M B L Y
C A U T I O N
Service Overview
Disassembly Caution
ASUS hereby provides a basic instruction for the disassembly of ASUS products, i.e. to
remove components and materials that require selective treatments, which are defined by
Annex II of the European Union (EU) Waste Electrical and Electronic Equipment
(WEEE) Directive 2002/96/EC. This instruction is intended for the use of end-of-life
recyclers or treatment facilities. Following is the list of Annex II of EU WEEE Directive
2002/96/EC.
- polychlorinated biphenyls (PCB) containing capacitors in accordance with Council
Directive 96/59/EC of 16 September 1996 on the disposal of polychlorinated
biphenyls and polychlorinated terphenyls (PCB/PCT),
- mercury containing components, such as switches or backlighting lamps,
- batteries,
- printed circuit boards of mobile phones generally, and of other devices if the surface
of the printed circuit board is greater than 10 square centimetres,
- toner cartridges, liquid and pasty, as well as colour toner,
- plastic containing brominated flame retardants,
- asbestos waste and components which contain asbestos,
- cathode ray tubes,
- chlorofluorocarbons (CFC), hydrochlorofluorocarbons (HCFC) or
hydrofluorocarbons (HFC), hydrocarbons (HC),
- gas discharge lamps,
- liquid crystal displays (together with their casing where appropriate) of a surface
greater than 100 square centimeters and all those back-lighted with gas discharge
lamps,
- external electric cables,
- components containing refractory ceramic fibres as described in Commission
Directive 97/69/EC of 5 December 1997 adapting to technical progress Council
Directive 67/548/EEC relating to the classification, packaging and labelling of
dangerous substances,
- components containing radioactive substances with the exception of components
that are below the exemption thresholds set in Article 3 of and Annex I to Council
Directive 96/29/Euratom of 13 May 1996 laying down basic safety standards for the
protection of the health of workers and the general public against the dangers arising
from ionising radiation,
- electrolyte capacitors containing substances of concern (height > 25 mm, diameter >
25 mm or proportionately similar volume)
BACK
V1.0
1 - 8
Loading...