ASUS S2 User Manual
1
LED Projector
Model
S2,S2E,S2C,S2M,S2Z
User Manual
2
CONTENT
1 Safety Precautions ........................................................ 3
1-1 Setting Up the Device .................................................. 3
1-2 Repairs ........................................................................... 5
1-3 Power Supply ................................................................ 5
1-4 Replaceable Batteries .................................................. 6
2 Know Your Projector ..................................................... 7
3 Symbols on the Host and Adapter .............................. 12
4 Description of Functions ............................................. 13
4-1 Power on ...................................................................... 13
4-2 Power off ...................................................................... 13
4-3 Volume ......................................................................... 13
4-4 Speaker ........................................................................ 13
4-5 Projector Settings ....................................................... 14
4-6 USB Charging Function ............................................. 14
5 Technical Specifications ............................................. 15
6 FCC .............................................................................. 15
7 IC .................................................................................. 15
3
1 Safety Precautions
Take note of all warning and safety notes indicated.
Physical injury or damage to the device or loss of data can result
from improper handling.
1-1 Setting Up the Device
a) The device is exclusively for indoor use.
b) The device should be placed securely on a stable, flat
surface. Position all cables in such a way that no one will
stumble on them. To avoid possible injuries to persons of
damage to the device itself.
c) Do not plug in the device in moist rooms. Never touch the
mains cable of the mains connection with wet hands.
d) The device must have sufficient ventilation and may not be
covered. Do not put your device in closed cabinets or
boxes.
e) Do not place the machine on soft surfaces such as
tablecloths or carpets and do not cover the ventilation slits.
Otherwise the device could overheat or catch fire.
f) Protect the device against direct sunlight, heat, large
temperature fluctuations and moisture. Do not place the
device in the vicinity of heaters or air conditioners. Observe
the information on temperature and humidity in the
technical data.
g) Do not allow liquids to enter into the device. Switch off the
device and disconnect it from the mains supply if liquids or
4
foreign substances end up inside the device. Have the unit
inspected by a technical service department.
h) Always handle the unit with care. Avoid touching the lens.
i) Never place heavy or sharp objects on the projector or the
power cable.
j) If the projector gets too hot or emits smoke, shut it down
immediately and unplug the power cable. Have your device
examined by trained professionals at a technical service
location. To prevent the spread of fire, open flames should
be kept away from the device.
k) Under the following conditions, a layer of moisture can
appear inside the device which can lead to malfunctions:
※ if the device is moved from a cold to a warm area;
※ after a cold room is heated;
※ when this device is placed in a damp room.
Proceed as follows to avoid any moisture build-up:
1. Seal this device in a plastic bag before moving it to
another room, in order for it to adapt to room conditions.
2. Wait one to two hours before you take the device out of
the plastic bag.
l) The device should not be used in a very dusty environment.
Dust particles and other foreign objects may damage the
unit.
m) Do not expose the device to extreme vibrations. It may
damage the internal components.
5
n) Do not allow children to handle the device wi thout
supervision. The packing materials should be kept out of
children.
o) Never use liquid, gaseous or easily flammable cleansers
(sprays, abrasives, polishes, alcohol). Use a soft, lint-free
cloth. Turn off the device and remove it from the power
supply before cleaning the surface.
1-2 Repairs
Do not make any repairs to the device yourself. Improper
maintenance can result in injuries or damage to the device. Only
have your device repaired by an authorized service center.
Do not remove the type label from your device; this would void the
warranty.
1-3 Power Supply
Use only the enclosed power adapter. Check whether the mains
voltage of the power supply matches the mains voltage available at
the setup location. This equipment complies with the voltage type
specified on the unit.
Switch the device on or off using the power switch before removing
the power supply from the socket.
The socket-outlet shall be installed near the equipment and shall
be easily accessible.
6
1-4 Replaceable Batteries
If the equipment is provided with a replaceable battery, and if
replacement by an incorrect type could result in an explosion (for
example, with some lithium batteries), the following applies:
- if the battery is placed in an OPPERATOR AREA, there
shall be a marking close to the battery or a statement in
both the operating and the servicing instructions;
- if the battery is placed elsewhere in the equipment, there
shall be a marking close to the battery or a statement in the
servicing instructions.
This marking or statement shall include the following or similar text:
Product images in this manual are for your reference only.
Loading...