1Car kit grooveAllows you to secure the device while driving
2DisplayDisplays information and allows you to manipulate items and execute menus by
3Sleep Mode ButtonPress to turn on the device, or to enter into sleep mode
4Light SensorAutomatically adjusts the backlight according to the light in the environment
5Charging LEDRed- charging, Green- full charged
6MicrophoneMicrophone for handsfree function
7Main Power switchTurns the main power on/off
8External Antenna portConnects to an external antenna for better signal performance (the external
9Micro SD SlotInsert the external Micro SD memory card to this slot
10SpeakerAllows you to listen to music, the navigation voice, and system warning
11Audio JackAllows you to connect headsets or two-channel speakers
12Mini USBAllows you to charge the device or connect to a PC via a USB cable
2
13BatteryBattery cover
3
1
7
tapping the screen.
antenna is optional)
8
13
12
11
10
9
Charging the Battery
You can charge the device from a car charger kit. Plug the cable to the mini-USB port on the
right side of the device.
NOTE:
• Charge the battery before using the device.Charge the battery before using the device..
Car charger kit
To check how much battery power remains:
1. �rom the main menu, tap�rom the main menu, tap Settings (�igure 1).
2. TheThe Sub-menu Settings appears. Tap to display more options (�igure 2).
3. Tap the battery icon (�igure 3).
The battery screen appears and displays a battery showing the battery power that
remains (�igure 4).
Figure 1Figure 2Figure 3Figure 4
• While charging, the power LED lights up in red.While charging, the power LED lights up in red.
When the battery is fully charged, the power LED
turns to green.
• Charging may take several hours.Charging may take several hours.
• You can use the device while charging. However,You can use the device while charging. However,
the device takes much less time to be fully charged
in sleep mode.
3
Install the Car Kit and Turn on the Device
To turn on the device, set the main power switch (at the bottom of the device) to ON. To enter
into/wake up from sleep mode, press the Sleep Mode Button ( ) on the top of the device.
NOTE:
•
If you press the Sleep Mode button when the
device is on, it enters into sleep mode.
•
When the device is on, it takes longer time for
the battery to be fully charged. When the device
is in sleep mode, the battery can be fully charged
quickly
.
To install the car kit:
1. Attached the cupula (1) to the
windshield inside your car.
2. Press the lever (2a) to secure
the cupula on the windshield
surface.
3. Adjust the angle of the
gooseneck, then secure it by
fastening screwcap (3).
4. Carefully place and slide the
device into the cradle (4).
NOTE:
Rise the lever (2b) to release the cupula from the windshield
4
Sleep Mode Button
.
Main power switch
1
3
4
2
2a
4
2b
.
Main Menu and Basic Settings
The
Main Menu
• Tap Navigation to enter the navigation system.
• Tap Video Player to play videos.
• Tap Music Player to play music.
• Tap Photo Viewer to view photos.
• Tap Phone to set and use bluetooth and phone features.
• Tap Settings to adjust the device settings (see gures on the next page).
appears after you turn on the device. �rom the
Main Menu
, you can:
5
Loading...
+ 10 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.