reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of ASUSTeK COMPUTER INC.
(“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)
the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE
OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED
FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME
WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY
ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS
AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the owners’ benefit, without intent to infringe.
ii
Page 3
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iii
Page 4
Safety information
• Before setting up this USB Type-C monitor, carefully read all the
documentation that came with the package.
• To prevent fire or shock hazard, never expose this USB Type-C
monitor to rain or moisture.
• Never try to open this USB Type-C monitor cabinet.
• Before using this USB Type-C monitor, make sure all cables are
correctly connected and the power cables are not damaged. If you
detect any damage, contact your dealer immediately.
• Avoid dust, humidity, and temperature extremes. Do not place this
USB Type-C monitor in any area where it may become wet. Place this
USB Type-C monitor on a stable surface.
• Never push objects or spill liquid of any kind into the slots on this USB
Type-C monitor cabinet.
• If you encounter technical problems with this USB Type-C monitor,
contact a qualified service technician or your retailer.
• This USB Type-C monitor is powered by USB port which complies with
LPS and SELV circuit according to IEC60950-1:2005.
iv
Page 5
Care & cleaning
• Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
v
Page 6
Wheretondmoreinformation
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
http://www.asus.com
Takeback services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for our customers to be able to responsibly recycle our products,
batteries and other components as well as the packaging materials.
Please go to
recycling information in different region.
http://csr.asus.com/english/Takeback.htm
for detail
vi
Page 7
1.1 Welcome!
Thank you for purchasing the ASUS® USB Type-C monitor!
The latest ASUS USB Type-C monitor provides great portability and
simplicity to your daily life, enhancing both of your viewing experience and
style.
1.2 Package contents
Check your package for the following items:
USB Type-C monitor
Quick Start Guide
Warranty Card
USB Type-C Cable
Carrying Case/Stand
•If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS USB Type-C Monitor MB169C+
1-1
Page 8
1.4 Monitor introduction
1.4.1 Front view
Close
Menu
QuickFit
Blue Light Filter
USB-C I DP ALTERNATE SUPPORT
≥ 3S
USB-C I DP ALTERNATE SUPPORT
USB-C I DP ALTERNATE SUPPORT
1
2
3
4
ON
OFF
5
10
0
≥5S
1. 3-way button
• Press center button to turn on the OSD menu.
• Long press center button for 3s to turn the monitor off.
• Press down button over 5s to lock/unlock the keys.
• Press up/down button to increase/decrease the value of the function
1-2
selected or move to the previous/next functions.
Chapter 1: Product Introduction
Page 9
• The color of the power indicator defines as the below table.
StatusDescription
WhiteON
AmberStandby mode
DarkOFF
2. Quickfit Hotkey
• This is a hotkey to activate the QuickFit function designed for alignment.
• The QuickFit function contains 3 pages of common grid patterns and
photo sizes. See page 1-4 for details.
3. Blue light filter
• Adjust the energy level of blue light emitted from LED backlight.
4. USB Type-C port
ASUS USB Type-C Monitor MB169C+
1-3
Page 10
1.4.2 QuickFit Function
The QuickFit function contains two patterns: (1) Grid (2) Photo size.
1. Grid pattern: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel.
Alignment Grid1
2. Photo size: Provides photographers and other users to accurately
view and edit their photos in real size on the screen.
4x6
Alignment Grid2
3x5
1-4
Chapter 1: Product Introduction
Page 11
2.1 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
• You can adjust the monitor’s angle by three positions with carrying
case.
• There are two strips for viewing angle adjustment. For upright position,
use the far side strip from the top cover. For tilt-back position, use the
other one instead.
ASUS USB Type-C Monitor MB169C+
2-1
Page 12
2.2 Connecting the USB Type-C cable
Connect one end of the USB Type-C cable to the monitor’s USB port, the
other end to your computer’s USB port
Type-C
2-2
Chapter 2: Setup
Page 13
3.1 OSD (On-Screen Display) menu
3.1.1Howtorecongure
S
Splendid
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB Mode
Reading Mode
Darkroom Mode
Scenery Mode DisplayPort 1920x1080@60Hz
1. Press the MENU button to activate the OSD menu.
2. Press the and buttons to toggle between options in the
Menu. As you move from one icon to another, the option name is
highlighted.
3. To select the highlighted item on the menu press the center button.
4. Press the and buttons to select the desired parameter.
5. Press the center button to enter the slide bar and then use the or
buttons, according to the indicators on the menu, to make your
changes.
6. Select the to return to previous menu or center to accept and
return to previous menu.
ASUS MB169
ASUS USB Type-C Monitor MB169C+
3-1
Page 14
3.1.2 OSD Function Introduction
1. Splendid
This function contains eight sub-functions that you can select for your
preference.
S
Splendid
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB Mode
Reading Mode
Darkroom Mode
Scenery Mode DisplayPort 1920x1080@60Hz
ASUS MB169
• Scenery Mode: This is the best choice for scenery photo displaying with
SPLENDID™ Video Intelligence Technology.
• Standard Mode: This is the best choice for document editing with
SPLENDID™ Video Intelligence Technology.
• Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Intelligence Technology.
• Game Mode: This is the best choice for game playing with SPLENDID™
Video Intelligence Technology.
• Night View Mode: This is the best choice for playing dark-scene game
or watching dark-scene movie with SPLENDID™ Video Intelligence
Technology.
• sRGB Mode: This is the best choice for viewing photos and graphics
from PCs.
• Reading Mode : This is the best choice for book reading.
• Darkroom Mode : This is the best choice for a weak ambient light
environmen.
3-2
•In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR
functions are not user-configurable.
•In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness,
Contrast and ASCR functions are not user-configurable.
•In the Reading Mode, the Saturation, SkinTone, Sharpness, ASCR, contrast,
and Color Temp functions are not user-configurable.
Chapter 3: General Instruction
Page 15
2. Blue Light Filter
Adjust the energy level of blue light emitted from LED backlight.
S
Blue Light Filter
Level 0
Level 1
Level 2
Level 3
Level 4
Scenery Mode DisplayPort 1920x1080@60Hz
ASUS MB169
• Level 0: No change.
• Level 1~4: The higher the level,the more blue light will be reduced.
• When Blue Light Filter is activated,the default settings of Standard
Mode will be automatically imported.
• Between Level 1 to Level 3, the Brightness function is userconfigurable.
• Level 4 is optimized setting. It is compliance with TUV Low Blue
Light Certification. The Brightness function is not user-configurable.
Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for
long hours. It is advised to take short breaks (at least 5 mins) after
around 1 hour of continuous working at the computer. Taking short
and frequent breaks is more effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest
the eye periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these
exercises often. If eye strain continues please consult a physician.
Eye exercises: (1) Repeating look up and down (2) Slowly roll your
eyes (3) Move your eyes diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Blue light Filter to reduce 70% (max.)
harmful blue light to avoiding CVS (Computer Vision Syndrome).
ASUS USB Type-C Monitor MB169C+
3-3
Page 16
3. Color
Select the image color you like from this function.
S
Color
Brightness
Contrast
Saturation
Color Temp.
Skin Tone
Smart View
Scenery Mode DisplayPort 1920x1080@60Hz
ASUS MB169
• Brightness: The adjusting range is from 0 to 100.
• Contrast: The adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and User Mode.
• Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish.
• Smart View: The versatile viewing positions with Smart View
Technology.
•In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0 ~ 100.
3-4
4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
VividPixel and ASCR from this main function.
Chapter 3: General Instruction
Page 17
S
Image
Sh arpne ss
Trace Free
Asp ect C ont rol
Viv idPix el
A
SC R
Scenery Mode DisplayPort 1920x1080@60Hz
ASUS MB169
• Sharpness: Adjusts the picture sharpness. The adjusting range is from
0 to 100.
• Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”.
• VividPixel: ASUS Exclusive Technology that brings lifelike visuals for
crystal-clear and detail-oriented enjoyment. The adjusting range is from
0 to 100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
•4:3 is only available when input source is in 4:3 format。
5. System Setup
Adjusts the system configuration.
ASUS USB Type-C Monitor MB169C+
3-5
Page 18
S
System Setup
S
ple ndi d Dem o Mo de
GamePlus
QuickFit
ECO Mod e
OS D S etup
Language
Key Lock
More
Scenery Mode DisplayPort 1920x1080@60Hz
ASUS MB169
S
System Setup
Back
Information
Power Indicator
Power Key Lock
All Reset
Scenery Mode DisplayPort 1920x1080@60Hz
...
ASUS MB169
• Splendid Demo Mode: Activate the demo mode for the Splendid
function.
• GamePlus: The GamePlus Function provides a toolkit and creates a
better gaming environment for users when playing different types of
games. Particularly, Chrosshair function is specially designed for new
gamers or beginners interested in First Person Shooter (FPS) games.
To active GamePlus:
• Select ON to enter the GamePlus main menu.
• Press and to select between Chrosshair and Timer function.
• Press center to confirm the function you choose. Press to go off,
and exit.
3-6
Chapter 3: General Instruction
Page 19
GamePlus main menu GamePlus-Crosshair GamePlus-Timer
GamePlus
NEXTNEXT
GamePlus
Crosshair
Timer
GamePlus
NEXTNEXT
NEXTNEXT
• QuickFit: See page 1-4 for details.
• ECO Mode: Activate the ecology mode for power saving.
• OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of
• Key Lock: Disable all key functions. Pressing the second button on the
right for more than five seconds to disable key lock function.
• More: Return the next page of System Setting.
• Back: Return the previous page of System Setting.
• Information:Displays the monitor information.
• Power Indicator: Turn the power LED indicator on/off.
• Power Key Lock: To disable / enable power key
• All Reset: Selects “Yes” to revert all settings to the factory default mode.
ASUS USB Type-C Monitor MB169C+
3-7
Page 20
6. Shortcut
Selecting this option allows you to set two shortcut keys.
S
Shortcut
Shortcut 1
Shortcut 2
Scenery Mode DisplayPort 1920x1080@60Hz
• Shortcut 1: User can select from “Blue Light Filter” “Splendid”,
“Brightness”, “Contrast”, “Color Temp.”, “QuickFit”, “GamePlus”
and set as shortcut key.
• Shortcut 2: User can select from “Blue Light Filter” “Splendid”,
“Brightness”, “Contrast”, “Color Temp.”, “QuickFit”, “GamePlus”
and set as shortcut key.
7. MyFavorite
Load/Save all settings on the monitor.
S
MyFavorite
Setting 1
Setting 2
Setting 3
Setting 4
Scenery Mode DisplayPort 1920x1080@60Hz
Load
Save
ASUS MB169
ASUS MB169
3-8
Chapter 3: General Instruction
Page 21
3.2Specications
ModelMB169C+
Panel Size15.6” (16:9, 39.62cm) wide screen
Resolution1920 x 1080
Brightness220 cd/m
Contrast (Min.)≧700:1
Display Colors262 K
Digital InputDisplayPort™ Alt Mode for USB Type-C™
ColorsDark Gray
Power Consumption≦ 7 W
Operating Temp.0° ~ 40°
Phys. Dimension (WxHxD)379.1 x 235.8 x 8.5 mm
Box Dimension (WxHxD)435 x 297 x 57 mm
Net Weight (Esti.)0.8 kg
Gross Weight (Esti.)2 kg
Regulation Approvals
Voltage Rating
*Specifications are subject to change without notice.
UL/cUL, CB, CE, CCC, KCC, FCC, BSMI, EAC(CU),
RCM, VCCI, J-Moss, UkrSEPRO, RoHS, WEEE,
Windows 10, Blue light filter, Flicker free
4.75-5.25V, 1.4A
2
ASUS USB Type-C Monitor MB169C+
3-9
Page 22
3.3 Troubleshooting (FAQ)
ProblemPossible Solution
Power LED is not ON
The power LED lights amber
and there is no screen image
Screen image is too light or
dark
Screen image bounces or a
wave pattern is present in the
image
Screen image has color
defects (white does not look
white)
• Press the button to check if the monitor is
in the ON mode.
• Check if the USB Type-C cable is properly
connected to the monitor and the power
outlet.
• Check if the monitor and the computer are in
the ON mode.
• Make sure the USB Type-C cable is properly
connected between the USB Type-C monitor
and the computer.
• Inspect the signal cable and make sure none
of the pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly
working.
• Adjust the Brightness settings via the button.
• Make sure the USB Type-C cable is properly
connected between the USB Type-C monitor
and the computer.
• Move electrical devices that may cause
electrical interference.
• Inspect the USB Type-C cable and make sure
that none of the pins are bent.
3-10
Chapter 3: General Instruction
Page 23
ProblemPossible Solution
After connecting with the
USB Type-C source device,
the power LED lights
continuously blinking or
showing ASUS logo repeatly
• Insufficient power supply from source USB
Type-C devices. Please follow below steps:
• Press the Blue Light Filter button , and
then connect the USB Type-C cable. This
operation will enable built-in safe mode. After
displaying ASUS logo, please release the
Blue Light Filter button. After ASUS Logo
disappearing, there is “safe mode” message
OSD showing up. Once “safe mode” message
OSD disappears, please set background color
to white image or nearly white image (*1).
• Press 3-way button, main menu OSD is
showing. The upper left corner of the OSD will
display small red-colored font “S”, indicating it
is now in safe mode. Enter brightness setup,
press the up key to tune up brightness. During
the process, please note down brightness
value “Y” up until MB169C+ re-start.(*2). For
example, if brightness value shows “70” and
MB169C+ restarts when adjusting to “71”,
“70” is the “Y” value to note down and is the
highest brightness value for the connecting
USB-C source device.
• Press 3-way button, main menu OSD is
showing. The upper left corner still indicate
“S” as safe mode. Adjust the OSD brightness
value to “Y”
• Close the OSD and press Low Blue Low Filter
hot key for 5 seconds to turn off safe mode.
• Complete.
*1: White color background will consume higher power, so it’s better to use
white color background to test the power limit from source USB Type-C
device.
*2: If MB169C+ does not re-start when adjusting to value 100, that means
source USB Type-C device has sufficient power supply.