ASUS J102 User Manual 2

Welcome the world in the palm of
your hands!

E1764E1764

E1764

E1764E1764

January 2005
First edition V1

Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.

Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.

Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be

reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of ASUSTeK COMPUTER INC.
(“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by ASUS; or
(2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN
IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

22

2

22

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the owners’ benefit, without intent to infringe.

Chapter summary

Chapter 1:Chapter 1:

Chapter 1:

Chapter 1:Chapter 1:

Chapter 2: Basic phone information Chapter 2: Basic phone information

Chapter 2: Basic phone information

Chapter 2: Basic phone information Chapter 2: Basic phone information

This chapter features the basic information on the mobile phone including the phone layout,
installation of phone components, and procedures that you have to perform before using the
mobile phone.

Chapter 3: Getting started Chapter 3: Getting started

Chapter 3: Getting started

Chapter 3: Getting started Chapter 3: Getting started

This chapter provides information on the display layout, screen icons, and basic phone
operations so you can start using your mobile phone.

Chapter 4: Changing the settings Chapter 4: Changing the settings

Chapter 4: Changing the settings

Chapter 4: Changing the settings Chapter 4: Changing the settings

This chapter provides information on how to change the phone settings. It tells you how to
change and customize your call, display, ring tone, and phone security settings.

Chapter 5: Managing the phone book Chapter 5: Managing the phone book

Chapter 5: Managing the phone book

Chapter 5: Managing the phone book Chapter 5: Managing the phone book

Welcome!Welcome!

Welcome!

Welcome!Welcome!

(Pages 9 ~ 22)

(Pages 23 ~ 62)

(Pages 63 ~ 124)

(Pages 125 ~ 154)

This chapter provides information on how to save, share, and manage contact information
using the phone book.

Chapter 6: Messaging features Chapter 6: Messaging features

Chapter 6: Messaging features

Chapter 6: Messaging features Chapter 6: Messaging features

This chapter provides information on the MMS and SMS messaging features of your mobile
phone including instructions on how to send text, graphics, and audio files to other mobile
phones.

(Pages 155 ~ 194)

33

3

33

Chapter 7: Capturing moments Chapter 7: Capturing moments

Chapter 7: Capturing moments

Chapter 7: Capturing moments Chapter 7: Capturing moments

This chapter provides information on how to capture photos and videos using the camera.

Chapter 8: Having fun Chapter 8: Having fun

Chapter 8: Having fun

Chapter 8: Having fun Chapter 8: Having fun

This chapter tells you how to play games on your mobile phone, change the ring tone
settings, and browse your captured photos and videos.

Chapter 9: Organizing your stuff Chapter 9: Organizing your stuff

Chapter 9: Organizing your stuff

Chapter 9: Organizing your stuff Chapter 9: Organizing your stuff

This chapter provides information on how to use the phone organizer for your daily activities.

Chapter 10: Managing calls and customizing manners Chapter 10: Managing calls and customizing manners

Chapter 10: Managing calls and customizing manners

Chapter 10: Managing calls and customizing manners Chapter 10: Managing calls and customizing manners

This chapter provides information on how to manage the call records and how to select or
customize the phone manner.

Chapter 11: Surfing the Internet and using value added servicesChapter 11: Surfing the Internet and using value added services

Chapter 11: Surfing the Internet and using value added services

Chapter 11: Surfing the Internet and using value added servicesChapter 11: Surfing the Internet and using value added services

(Pages 293 ~ 304)

(Pages 227 ~ 234)

(Pages 195 ~ 226)

(Pages 235 ~ 270)

(Pages 271 ~ 292)

44

4

44

This chapter tells you how to surf the Internet using your mobile phone and how to access
value-added services offered by your phone operator.

Safety Notice Safety Notice

Safety Notice

Safety Notice Safety Notice

(Pages A-1 ~ A-2)

Safety precautions

For your safety and to keep your phone in good operating condition, read the following tips
and reminders carefully before using your phone.

Do not use
driving, unless you use an
earphone or hands-free car kit.

Switch off the phone when you are
inside a hospital or near medical
equipment. Follow hospital rules
and regulations on using devices
that may cause interference.

Switch off the phone while in an
aircraft. Wireless devices may
cause interference in the aircraft
communication and navigation
systems.

Switch off the phone when
refuelling. Do not use the phone
near fuels or chemicals.

Always keep the phone dry and
free from dust.

your phone while

Do not use the phone where
blasting is in progress. Strictly
observe restrictions where
required.

Use the phone to call for help or
to help others during
emergencies.

Ensure that the phone is
switched off before removing
the battery or SIM card.

Refer phone servicing only to
qualified personnel.

Use only approved accessories
and batteries. Do not connect
incompatible products or
devices.

Use the phone following the
instructions in this user guide.

55

5

55

Conventions

To make sure that you perform certain tasks properly, take note of the following
conventions used throughout this user guide.

NOTENOTE

NOTE: Tips and information to aid in completing a task.

NOTENOTE

IMPORTANTIMPORTANT

IMPORTANT: Information that you MUST follow to

IMPORTANTIMPORTANT
complete a task.

CAUTIONCAUTION

CAUTION: Information to prevent damage to the phone

CAUTIONCAUTION
when trying to complete a task.

WARNINGWARNING

WARNING: Information to prevent injury to yourself when

WARNINGWARNING
trying to complete a task.

66

6

66

NETWORK DEPENDENT/SUBSCRIBED FEATURENETWORK DEPENDENT/SUBSCRIBED FEATURE

NETWORK DEPENDENT/SUBSCRIBED FEATURE:

NETWORK DEPENDENT/SUBSCRIBED FEATURENETWORK DEPENDENT/SUBSCRIBED FEATURE
The phone feature is network dependent or subscribed.

Welcome!

®®

®

Thank you for choosing the

ASUSASUS

ASUS

ASUSASUS

®®

J102 mobile phone J102 mobile phone

J102 mobile phone!

J102 mobile phone J102 mobile phone

This phone comes with the latest mobile technology that fits your world into your hands. The
J102 is a dual-band mobile phone with dual LCD, built-in 300K camera, MMS/SMS messaging
capability, organizer, WAP, and GPRS.

With 4 MB memory, J102 allows you to save graphics, audio, video, and text files like no other
mobile phone could match. The J102 mobile phone also comes in a light and compact design
making it a perfect partner when you’re on or off the road.

With these and many more, J102 is sure to give you a satisfying mobile phone experience.

Package contents

Check your mobile phone package for the following items.

J102 mobileJ102 mobile

J102 mobile

J102 mobileJ102 mobile

phone unitphone unit

phone unit

phone unitphone unit

• Contact your retailer if any of the items is damaged or missing.

• Your phone operator may place other items that are not part of the standard mobile
phone package.

Lithium-IonLithium-Ion

Lithium-Ion

Lithium-IonLithium-Ion

batterybattery

battery

batterybattery

HeadsetHeadset

Headset

HeadsetHeadset

Battery chargerBattery charger

Battery charger

Battery chargerBattery charger

and plugand plug

and plug

and plugand plug

User GuideUser Guide

User Guide

User GuideUser Guide

77

7

77

Optional accessoriesOptional accessories

Optional accessories

Optional accessoriesOptional accessories

These phone accessories are optional items and are purchased separately. Ask your phone
operator for details.

Desktop chargerDesktop charger

Car chargerCar charger

Car charger

Car chargerCar charger

Desktop charger

Desktop chargerDesktop charger

USB data transfer cableUSB data transfer cable

USB data transfer cable

USB data transfer cableUSB data transfer cable

88

8

88

USB sync cableUSB sync cable

USB sync cable

USB sync cableUSB sync cable

Support CDSupport CD

Support CD

Support CDSupport CD

This chapter features the basic
information on the mobile phone
including the phone layout,
installation of phone components,
and procedures that you have to
perform before using the mobile
phone.

Chapter summaryChapter summary

Chapter summary

Chapter summaryChapter summary

Phone layout ..................................................................................... 11

Function keys .................................................................................... 13

Multi-color LED indicator ................................................................... 14

Subscriber Identity Module (SIM) card .............................................. 15

Battery .............................................................................................. 16

Battery power levels .................................................................. 16

Installing and removing the battery ........................................... 17

Charging the battery.................................................................. 18

Signal strength .................................................................................. 20

LCD displays ...................................................................................... 20

Camera .............................................................................................. 21

Switching the phone ON or OFF ........................................................ 22

1010

10

1010

Phone layout

Front viewFront view

Front view

Front viewFront view

AntennaAntenna

Antenna

AntennaAntenna

FlashFlash

Flash

FlashFlash
CameraCamera

Camera

CameraCamera

External displayExternal display

External display

External displayExternal display

LED indicatorLED indicator

LED indicator

LED indicatorLED indicator

SpeakerSpeaker

Speaker

SpeakerSpeaker

Back viewBack view

Back view

Back viewBack view

Strap holderStrap holder

Strap holder

Strap holderStrap holder

I/O connectorI/O connector

I/O connector

I/O connectorI/O connector
covercover

cover

covercover

Battery latchBattery latch

Battery latch

Battery latchBattery latch

Battery*Battery*

Battery*

Battery*Battery*

* The battery comes uninstalled on the J102 mobile phone. Refer to the battery

installation section for instructions on how to install the battery.

1111

11

1111

Phone layout

Side view (Left)Side view (Left)

Side view (Left)

Side view (Left)Side view (Left)

Camera/VoiceCamera/Voice

Camera/Voice

Camera/VoiceCamera/Voice

dial buttondial button

dial button

dial buttondial button

Volume up buttonVolume up button

Volume up button

Volume up buttonVolume up button
Volume down button Volume down button

Volume down button

Volume down button Volume down button

I/O connectorI/O connector

I/O connector

I/O connectorI/O connector

(inside the cover)(inside the cover)

(inside the cover)

(inside the cover)(inside the cover)

Front view (Open flip top)Front view (Open flip top)

Front view (Open flip top)

Front view (Open flip top)Front view (Open flip top)

EarpieceEarpiece

Earpiece

EarpieceEarpiece

Main displayMain display

Main display

Main displayMain display

Navigation/Quicklaunch keysNavigation/Quicklaunch keys

Navigation/Quicklaunch keys

Navigation/Quicklaunch keysNavigation/Quicklaunch keys

Soft key (left)Soft key (left)

Soft key (left)

Soft key (left)Soft key (left)

Call keyCall key

Call key

Call keyCall key

Flip topFlip top

Flip top

Flip topFlip top

Soft keySoft key

Soft key

Soft keySoft key
(right)(right)

(right)

(right)(right)
On/Off/EndOn/Off/End

On/Off/End

On/Off/EndOn/Off/End
callcall

keykey

call

key

callcall

keykey

1212

12

1212

Alphanumeric keysAlphanumeric keys

Alphanumeric keys

Alphanumeric keysAlphanumeric keys

MicrophoneMicrophone

Microphone

MicrophoneMicrophone

Function keys

When the phone is in idle mode, you can press the following function keys to launch some of
the most common phone functions and features.

Displays the SMS/MMS inbox

Displays the Fun menuDisplays the Camera menu

Launches the phone menu; performs

various functions depending on the

menu level and screen display

Answers a call; displays dialed numbers

Puts the phone in active mode;

selects an option; enters data; long

press to launch WAP; shows the

wallpaper in full screen mode

Side keysSide keys

Side keys

Side keysSide keys

Press once to launch the camera. Long press to launch the voice command function.

Press this button to increase the ring tone volume.

Displays the phone book when in idle
mode; performs various functions
depending on the menu level and
screen display

Ends a call; turns the phone ON or OFF
Displays your shortcuts

Enters numbers, alphanumeric
characters, and symbols

Press this button to decrease the ring tone volume.

1313

13

1313

Multi-color LED indicator

The phone comes with a multi-color LED located below the external display. This LED displays
the phone, message, or call status in four different color indications.

ColorColor

Color

ColorColor

Purple (flashing) Default (Idle)
Red Battery is charging
Red (flashing) Battery low warning
Green Battery is fully charged
Green (flashing) Missed call

LED indicatorLED indicator

LED indicator

LED indicatorLED indicator

Aside from the four-color LED indicator, seven colors are available for caller
identification. You may assign a specific LED color to a phone book entry. See Chapter 9
“Organizing your stuff” for details.

StatusStatus

Status

StatusStatus

New SMS/MMS message

1414

14

1414

Subscriber Identity Module (SIM) card

The phone operator provides you with a Subscriber Identity Module (SIM) card that stores your
mobile phone number, phone book entries, SMS/MMS messages, graphics, etc. Install the SIM
card before you install the battery.

The SIM card usually comes embedded on a plastic card. Read the SIM card documentation

before removing the SIM card. Remove any rough edges on the SIM card before you install

it to the phone.

AA

A

AA

BB

B

To install the SIM card:

1. Position the SIM card (A) over the SIM
card slot with the contacts (golden
connectors) face down, and the nicked
corner (B) matching the notch (C) on the
SIM card slot.

BB

22

2

22

11

1

11

2. Carefully press, then slide the SIM card
into the slot until it fits completely.

• Keep SIM cards out of children’s reach.

• Be careful when handling, inserting, or removing a SIM card to avoid damaging its

contacts.

CC

C

CC

1515

15

1515

To remove or replace a SIM card:

1. When installed, remove the battery
following the instructions in the next
section.

AA

A

2. From the dent (A) on the SIM card slot, use
your fingertip to push the SIM card halfway

33

3

33

AA

out of the slot.

22

2

3. Carefully pull the SIM card out from the SIM

22

card slot. Set the SIM card aside.

4. Replace the SIM card following the
instructions in the previous section.

Battery

A rechargable Lithium-Ion battery powers your mobile phone. Make sure that the battery is
fully charged before using the phone for the first time. Initial battery charging may take
about eight (8) hours. You can charge the battery when the phone is either on or off.

1616

16

1616

A battery icon on the main and external displays indicates the battery power level. Refer to
the table below for battery icon indications.

Battery power levelsBattery power levels

Battery power levels

Battery power levelsBattery power levels

The battery icon on both displays helps you
keep track of the remaining battery power,
so you will know when to charge the battery.
Take note of the battery icon indicating the
battery power levels.

Icon IndicationIcon Indication

Icon Indication

Icon IndicationIcon Indication

Battery is 55% to 100% full
Battery is 25% to 55% full
Battery is 10% to 25% full
Battery is 0% to 10% full
Battery has low power.

Charging is needed.

Installing and removing the batteryInstalling and removing the battery

Installing and removing the battery

Installing and removing the batteryInstalling and removing the battery

Follow these instructions to install the battery to the mobile phone.
To install the battery:

1. Insert the battery hooks to the holes on
the bottom of the battery compartment.

To remove the battery:

1. Push the battery latch upward until the
battery ejects from the unit.

2. Push the battery to the direction of the

2. Lift the battery until it is disengaged from

arrow until it clicks in place.

the battery terminals. Set the battery
aside.

These illustrations are for reference only and may
not exactly show the actual unit. Colors were used
for emphasis.

1717

17

1717

Charging the batteryCharging the battery

Charging the battery

Charging the batteryCharging the battery

Make sure that the battery is properly installed before charging.

To charge the battery:

1. Connect the charger to a power source.
2 Flip open the I/O connector cover on the

side of the phone.

3. Connect the power cable plug to the I/O
connector.

22

2

22

11

1

11

1818

18

1818

33

3

33

Disconnect the charger from the power source and the plug from the mobile phone
when charging is complete.

When the phone is onWhen the phone is on

When the phone is on

When the phone is onWhen the phone is on

The battery icon on both external and main
displays animates to indicate that the battery
is charging. It takes about two to three hours
to fully charge the battery. A message
appears on the display to tell you that the
battery is fully charged. The battery icon now
shows four green bars.

External displayExternal display

External display

External displayExternal display

When the phone is offWhen the phone is off

When the phone is off

When the phone is offWhen the phone is off

Both displays show an animated battery icon
to indicate the battery is charging. When the
battery is fully charged, both displays show a
fully charged battery icon.

Battery is chargingBattery is charging

Battery is charging

Battery is chargingBattery is charging

Main displayMain display

Main display

Main displayMain display

Battery is fullyBattery is fully

Battery is fully

Battery is fullyBattery is fully

chargedcharged

charged

chargedcharged

1919

19

1919

Signal strength

Your phone has an external antenna and
signal strength icon in both main and

IconIcon

Icon

IconIcon

IndicationIndication

Indication

IndicationIndication
No service (dead spot)

external LCD displays to indicate the signal
level. Refer to the table for signal strength

Poor signal

indications.

The signal strength depends on your proximity to your phone operator signal station. Ask
assistance from your phone operator if the signal level in your location is weak or
fluctuating.

Low signal
Fair signal
Good signal
Strong signal (ideal)
Emergency outgoing calls only;

No SIM card installed

LCD displays

This phone includes two LCD displays: external and main. Both displays are illuminated by a
backlight that automatically turns on or off after a certain period of time depending on your
setting. Refer to the next chapter for details on adjusting the LCD backlight.

2020

20

2020

Do not apply too much pressure on the phone to avoid damaging the LCD displays. Avoid
putting the phone in your pockets, cramped bags, and in areas where it is pressed on hard
surfaces.

Camera

Your phone comes with a built-in camera that allows you to capture, edit, and share photos
and videos with other mobile phone, PDA, notebook, or PC users. Refer to Chapter 5 “Having
fun” for more information.

CameraCamera

Camera

CameraCamera

SpecificationSpecification

Specification

SpecificationSpecification

SensorSensor

Sensor CMOS type

SensorSensor
PixelPixel

Pixel 300K

PixelPixel
Self-captureSelf-capture

Self-capture Supported thru the external display

Self-captureSelf-capture
Preview functionPreview function

Preview function Supported

Preview functionPreview function
TimerTimer

Timer Supported

TimerTimer
Low light supportLow light support

Low light support Built-in flash

Low light supportLow light support
Digital ZoomDigital Zoom

Digital Zoom Supported

Digital ZoomDigital Zoom
Multi-captureMulti-capture

Multi-capture Supports 4, 6, 9, and 16 captures

Multi-captureMulti-capture
VideoVideo

Video 15-second AVI video

VideoVideo

DescriptionDescription

Description

DescriptionDescription

(no audio)

2121

21

2121

Switching the phone ON or OFF

To turn

1 Open the phone flip top to access the keypad.

2. Press and hold for a few seconds until the display turns on.

3. If you are asked for a Personal Identification Number (PIN) code, key-in the code using the

ONON

O N the phone:

ONON

keypad, then press . The main display shows the idle screen.

• Some SIM cards come with a default PIN code. Read the SIM card documentation
before entering the PIN code.

2222

22

2222

• The phone allows you to enter the PIN code in three attempts. You must enter the
PIN Unlocking Key (PUK) if you fail to key-in the correct PIN in three attempts. The
PUK is provided by your phone operator.

To turn

1. Open the phone flip top.

2. Set the phone in idle mode, then press and hold

OFF OFF

OFF the phone:

OFF OFF

turns off.

for a few seconds until the display

This chapter provides information on
the display layout, screen icons, and
basic phone operations so you can
start using your mobile phone.

Chapter summaryChapter summary

Chapter summary

Chapter summaryChapter summary

Display layout ................................................................................... 26

Other display modes .................................................................. 27

Indicator icons ................................................................................... 28

Main menu ......................................................................................... 30

Navigating the main menu ......................................................... 31

Sub-menu .......................................................................................... 31

Changing initial settings .................................................................... 32

Setting the date and time.......................................................... 32

Setting the time zone ................................................................ 33

Setting the date format ............................................................. 34

Setting the time format ............................................................. 35

Selecting a language .................................................................. 36

Creating a greeting text ............................................................ 37

2424

24

2424

Basic operations ................................................................................ 38

Placing a local call ...................................................................... 38

Placing an international call ........................................................ 39

Calling a number from your phone book .................................... 40

Calling a recently dialed number ................................................ 40

Initiating a conference call ......................................................... 43

Answering a call ......................................................................... 50

Adjusting the ring volume .......................................................... 51

Saving a phone number in the phone book ................................ 52

Entering text .............................................................................. 54

2525

25

2525

Display layout

The phone display area has three parts when in idle mode.

Icon/Title barIcon/Title bar

Icon/Title bar

Icon/Title barIcon/Title bar

idle idle

In

idle mode, this bar shows

idle idle

the indicator icons.

2626

26

2626

In either

function function

or

function modes, this bar

function function
shows the name of the
current menu, sub-menu, or
function.

Soft key barSoft key bar

Soft key bar

Soft key barSoft key bar

This bar shows the current
functions of the left and
right soft keys. The soft key
functions vary depending on
the selected menu.

The soft key bar also displays the available functions of the 4-way navigation keys when in
sub-menu or function display. The arrows (left/right/up/down) appear or disappear depending
on the current sub-menu, function, or application. When a directional arrow appears, you can
press the corresponding button on the navigation key to move the cursor or selection to that
direction.

menumenu

menu,

menumenu

sub-menusub-menu

sub-menu,

sub-menusub-menu

Text and graphic areaText and graphic area

Text and graphic area

Text and graphic areaText and graphic area

idle idle

In

idle mode, this area

idle idle
shows the name of the
service provider, date,
time, and manner if you
choose to display them.
This are also displays
your selected wallpaper.

In either
sub-menusub-menu

sub-menu, or

sub-menusub-menu
modes, this area displays
text, graphics, or both.

menumenu

menu,

menumenu

functionfunction

function

functionfunction

Other display modesOther display modes

Other display modes

Other display modesOther display modes

The phone display varies according to menu levels and modes.

Menu modeMenu mode

Menu mode

Menu modeMenu mode

Page loading modePage loading mode

Page loading mode

Page loading modePage loading mode

Sub-menu modeSub-menu mode

Sub-menu mode

Sub-menu modeSub-menu mode

Text input modeText input mode

Text input mode

Text input modeText input mode

Function modeFunction mode

Function mode

Function modeFunction mode

Selection modeSelection mode

Selection mode

Selection modeSelection mode

Phone book modePhone book mode

Phone book mode

Phone book modePhone book mode

Camera modeCamera mode

Camera mode

Camera modeCamera mode

2727

27

2727

Indicator icons

The icons that appear on the displays indicate the activated phone features and alert you of
an SMS/MMS message or other useful information. The screen displays below show all the
icons in the main and external displays. Refer to the table on the next page for a description of
each icon.

Main displayMain display

Main display

Main displayMain display

(silent mode and

privilege list activated)

External displayExternal display

External display

External displayExternal display

(silent mode)

Main displayMain display

Main display

Main displayMain display

(vibrate mode and

ignore list activated)

External displayExternal display

External display

External displayExternal display

(vibrate mode)

2828

28

2828

The indicator icons appear only after you have installed a SIM card and turned on the phone.

IconIcon

Icon

IconIcon

DescriptionDescription

Description

DescriptionDescription

IconIcon

Icon

IconIcon

DescriptionDescription

Description

DescriptionDescription

Indicates the signal strength level;
permanently positioned on the top
left corner of both displays. See
page 20 for other indications.

Appears when a new SMS message
is received; blinks if the SIM card
has reached its maximum capacity*

Appears when a new MMS message
is received

Appears when a new MMS message
is downloaded to your phone

Appears if you set an alarm
Appears if you set the phone to

silent mode
Appears if you set the ring mode

to Vibrate
Appears if your phone has an

activated roaming feature**

Indicates the battery level;
permanently positioned on the top
right corner of both displays. See
page 16 for other indications

Appears if you activated the call
forwarding feature**

Appears when you are connected
to a GPRS network**

Appears if you activate the call
filter Ignore list

Appears if you activate the call
filter Privilege list

Main menu icon; permanently
positioned on the lower left corner
of the main display

Phonebook icon; permanently
positioned on the lower right
corner of the main display

* The maximum SMS/MMS capacity of SIM cards vary. Refer to the SIM card documentation for details.
** Network-dependent or subscribed feature.

2929

29

2929

Main menu

The icons in the main menu represents all the functions and features of
your mobile phone. You can open the main menu by pressing [ ]
when the phone is in idle mode. When selected, the menu icon animates

and the screen shows the menu description on the bottom left corner of
the display.

Refer to the table below for a brief description of the menu icons and
the their functions.

3030

30

3030

IconIcon

Icon

IconIcon

DescriptionDescription

Description

DescriptionDescription

NetworkNetwork

Network. Allows you to surf the

NetworkNetwork
Internet using the WAP feature of the
phone and access other services offered
by your phone operator.

MessageMessage

Message. Allows you to compose, edit,

MessageMessage
send, and manage SMS and MMS
messages to almost any mobile phone.

MannerManner

Manner. Allows you to select from five

MannerManner
preset manners or to customize the
manner ring tone, volume, etc.

SettingsSettings

Settings. Allows you to adjust the

SettingsSettings
phone ringtone, display, security,
connectivity, memory, and network
settings.

IconIcon

Icon

IconIcon

DescriptionDescription

Description

DescriptionDescription

CameraCamera

Camera. Allows you to capture, manage,

CameraCamera
and share photos and videos.

FunFun

F u n. Allows you to play Java games,

FunFun
compose ring tones, and access the
Image Gallery.

OrganizerOrganizer

Organizer. Allows you to organize

OrganizerOrganizer
your daily schedule using the Calendar,
Alarm, World Clock, Text/Voice Memo,
Currency Exchange, and other features.

PhonebookPhonebook

Phonebook. Allows you to add,

PhonebookPhonebook
organize, search contacts saved in the
phone and SIM memory.

CallsCalls

Calls. Allows you to manage missed,

CallsCalls
dialled, and answered call information.

Navigating the main menuNavigating the main menu

Navigating the main menu

Navigating the main menuNavigating the main menu

To navigate the main menu:

Use the navigation buttons to select a menu icon, then press
to display the menu items. For example, if you want to select
SettingsSettings

Settings, press (left) once to select, then press .

SettingsSettings

OROR

OR

OROR

Press the corresponding menu icon number on the keypad to launch
the menu. For example, if you want to select

display the Settings menu.

By default, the

Camera Camera

Camera icon is selected everytime you open the main menu.

Camera Camera

SettingsSettings

Settings, press

SettingsSettings

to

Sub-menu

Each main menu item has a sub-menu that lists the specific
functions of that menu. There are two ways to open the sub-menu:

• Press (up) or (down) to select an item, then press to
open the sub-menu functions.

• Press the corresponding item number on the keypad to open the
sub-menu functions.

3131

31

3131

Changing initial settings

You need to change some initial phone settings such as the date, time,
time zone, and greeting text before using the phone. These initial
settings are important so you can synchronize the mobile phone and
your current location time.

Setting the date and timeSetting the date and time

Setting the date and time

Setting the date and timeSetting the date and time

To set the date and time:

3232

32

3232

1. From the
the date and time options.

2. Press
current date and time is displayed above the soft key bar.

3. If the date or time is incorrect, press
Date/Time Date/Time

Date/Time screen.

Date/Time Date/Time

4. On the date field, key-in the current date in DD.MM.YYYY format.
For example, key-in 2-8-0-9-2-0-0-4 to set the date to 28 September

2004. You can press

5. When finished setting the date, press
field.

6. On the time field, key-in the current time in HH:MM 24-hour format.
For example, key-in 1-1-3-1 to set the time to 11:31 AM.

7. When finished setting the time, press
message appears indicating that you have successfully changed the date
and time.

The display returns to the

Phone SettingsPhone Settings

Phone Settings sub-menu, select

Phone SettingsPhone Settings

(up) or (down) to select

(Back) to select and replace an incorrect entry.

Date/TimeDate/Time

Date/Time menu.

Date/TimeDate/Time

Set Date/TimeSet Date/Time

Set Date/Time.

Set Date/TimeSet Date/Time

to display the

. A

Date/Time Date/Time

Date/Time to display

Date/Time Date/Time

The

SetSet

Set

SetSet

(down) to move to the time

Set successfully!Set successfully!

Set successfully!

Set successfully!Set successfully!

Setting the time zoneSetting the time zone

Setting the time zone

Setting the time zoneSetting the time zone

To set the time zone:

1. From the

2. From the
select
the soft key bar.

3. If the time zone is incorrect, press
Zone Zone

Zone screen.

Zone Zone

4. Press (up) or (down) to highlight the correct time zone, then
press
displayed above the soft key bar.

5. When finished setting the time zone, press
the previous menu.

Phone SettingsPhone Settings

Phone Settings sub-menu, select

Phone SettingsPhone Settings

Date/TimeDate/Time

Date/Time menu items, press

Date/TimeDate/Time

Set Time ZoneSet Time Zone

Set Time Zone.

Set Time ZoneSet Time Zone

to select.

The first item on the time zone list,
Line.

The time difference of the selected time zone is

The current time zone is displayed above

to display the

Date/TimeDate/Time

Date/Time.

Date/TimeDate/Time

(up) or (down) to

Set TimeSet Time

Set Time

Set TimeSet Time

(Back) to return to

IDLIDL

I D L, means International Date

IDLIDL

3333

33

3333

Setting the date formatSetting the date format

Setting the date format

Setting the date formatSetting the date format

There are three available date formats you can choose from.

To set the date format:

1. From the

2. From the
select
the soft key bar.

3. To select another date format, press
Format Format

Format screen.

Format Format

4. Press
press

5. When finished, press (Back) to return to the previous menu.

Phone SettingsPhone Settings

Phone Settings sub-menu, select

Phone SettingsPhone Settings
Date/TimeDate/Time

Date/Time menu items, press

Date/TimeDate/Time

Date FormatDate Format

Date Format.

Date FormatDate Format

(up) or (down) to highlight a date format, then

to select.

The default date format is displayed above

to display the

Date/TimeDate/Time

Date/Time.

Date/TimeDate/Time

(up) or (down) to

DateDate

Date

DateDate

3434

34

3434

Setting the time formatSetting the time format

Setting the time format

Setting the time formatSetting the time format

You can select a 24-hour or a 12-hour time format.

To set the time format:

1. From the

2. From the
select
the soft key bar.

3. To select another time format, press
Format Format

Format screen.

Format Format

4. Press
press

5. When finished, press (Back) to return to the previous menu.

Phone SettingsPhone Settings

Phone Settings sub-menu, select

Phone SettingsPhone Settings

Date/TimeDate/Time

Date/Time menu items, press

Date/TimeDate/Time

Time FormatTime Format

Time Format.

Time FormatTime Format

(up) or (down) to highlight a time format, then

to select.

The default time format is displayed above

to display the

Date/TimeDate/Time

Date/Time.

Date/TimeDate/Time

(up) or (down) to

TimeTime

Time

TimeTime

3535

35

3535

Selecting a languageSelecting a language

Selecting a language

Selecting a languageSelecting a language

To select a language:

1. From the
default language is displayed on top of the soft key bar.

2. To change the language, press
screen.

3. Press
phone to use, then press

4. When finished, press (Back) to return to the previous menu.

Phone SettingsPhone Settings

Phone Settings sub-menu, select

Phone SettingsPhone Settings

to display the

(up) or (down) to highlight the language you want the

to select.

Language. Language.

Language. The

Language. Language.

Select LanguageSelect Language

Select Language

Select LanguageSelect Language

3636

36

3636

Creating a greeting textCreating a greeting text

Creating a greeting text

Creating a greeting textCreating a greeting text

The greeting text appears in the main display everytime you turn on the
phone.

To create a greeting text:

1. From the

2. Press

3. Press
key-in your greeting, then press

Set successfully!Set successfully!

A

Set successfully! message appears to indicate that you have

Set successfully!Set successfully!

successfully created the greeting text.
The display returns to the

Phone SettingsPhone Settings

Phone Settings sub-menu, select

Phone SettingsPhone Settings

to display the

or to select the desired text format, use the keypad to

The greeting text is limited to 18 characters.

Refer to the “Entering text” section on page 56 for details on how
to input text.

Greeting Text Greeting Text

Greeting Text screen.

Greeting Text Greeting Text

.

Phone Settings Phone Settings

Phone Settings menu.

Phone Settings Phone Settings

Greeting TextGreeting Text

Greeting Text.

Greeting TextGreeting Text

3737

37

3737

Basic operations

Placing a local callPlacing a local call

Placing a local call

Placing a local callPlacing a local call

To place a local call:

1. Set the phone in idle mode.

2. Use the numeric keys [ to ] to key-in the number of the party
you wish to call, then press

When available, the display shows the name and photo of the called
party. Refer to Chapter 5 “Managing your phone book” for details
on customizing contact information.

3. Talk to the called party when connected. The display shows the
name and photo of the called party, duration of the call, and audio
status (Mute/Not Mute).

4. Press
briefly to display the call duration and voice recording, if any. The
phone returns to idle mode.

to terminate the call. A

Local calls are subject to tolls, fees, and/or taxes. Ask your phone
operator for the latest call charges in your location.

.

Call Summary Call Summary

Call Summary screen appears

Call Summary Call Summary

3838

38

3838

Placing an international callPlacing an international call

Placing an international call

Placing an international callPlacing an international call

To place an international call:

1. Set the phone in idle mode.

2. Long press

3. Use the numeric keys [
code, and phone number of the party you wish to call, then
press

Country codeCountry code

Country code

Country codeCountry code

4. Talk to the called party when connected. The display shows the
name and photo of the called party (when available), duration of
the call, and audio status (Mute/Not Mute).

5. Press
appears briefly to display the call duration and voice recording, if
any. The phone returns to idle mode.

.

to terminate the call. A

International long distance calls are subject to tolls, fees, and/or
taxes. Ask your phone operator for the latest call charges in your
location.

to display the (+) sign.

to ] to key-in the country code, area

++

6363

22

+

63

++

6363

Area codeArea code

Area code

Area codeArea code

65866876586687

2

6586687

22

65866876586687

Phone numberPhone number

Phone number

Phone numberPhone number

Call Summary Call Summary

Call Summary screen

Call Summary Call Summary

3939

39

3939

Calling a number from your phone bookCalling a number from your phone book

Calling a number from your phone book

Calling a number from your phone bookCalling a number from your phone book

To call a number from your phone book:

1. Set the phone in idle mode, then press [ ] to display the
names of contacts saved in the phone and/or SIM memory.

2. Press (up) or (down) to select the contact you wish to call.
The contact number is displayed above the soft key bar.

4040

40

4040

3. Press

4. When finished, press

Calling a recently dialed numberCalling a recently dialed number

Calling a recently dialed number

Calling a recently dialed numberCalling a recently dialed number

To call a recently dialed number:

1. Set the phone in idle mode, then press to display the list of
recently dialled, received, or missed calls.

2. Press
The date and time of the call record is displayed above the soft key bar.

3. Press

4. When finished, press

to place the call.

to terminate the call.

Refer to the Chapter 5 “Managing your phone book” for details on
how to create contact information in the phone book.

(up) or (down) to select the call record you wish to call.

to place the call.

to terminate the call.

Refer to the Chapter 10 “Managing calls and customizing manners”
for more information on saving recently dialed numbers.

Using voice command to dial a numberUsing voice command to dial a number

Using voice command to dial a number

Using voice command to dial a numberUsing voice command to dial a number

You must save at least one voice command or voice tag before you
can use this feature. Refer to Chapter 9 “Organizing your stuff” for
details.

To use voice command to dial a number:

1. Set the phone in idle mode, then long press the camera button on the
left side of the phone.

2. After the beep, clearly say the name of the party you wish to call.

3. The

4. When finished, press

Voice Recognition Voice Recognition

Voice Recognition screen records and processes the voice

Voice Recognition Voice Recognition
command. If the phone recognizes the voice command, it
automatically dials the number corresponding to the command/name.
The screen displays the name of the person you are calling.

to terminate the call.

Voice RecognitionVoice Recognition

If the

Voice Recognition fails three times, the screen displays an

Voice RecognitionVoice Recognition
error message. Check if the name dialing record or the voice tag is
correct.

4141

41

4141

Using speed dialUsing speed dial

Using speed dial

Using speed dialUsing speed dial

You should have previously assigned a phone number to one of the
speed dialing keys before using this feature. Refer to Chapter 5
“Managing your phone book” for details on speed dialing.

To use speed dialing:

1. Press an assigned speed dial key [ to ] , then press . The
phone calls the number that corresponds to the assigned speed dial
key.

2. Talk to the called party when connected. The display shows the
name and photo of the called party (when available), duration of the
call, and audio status (Mute/Not Mute).

4242

42

4242

3. Press
briefly to display the call duration and voice recording, if any.

The phone returns to idle mode.

to terminate the call. A

Call Summary Call Summary

Call Summary screen appears

Call Summary Call Summary

Initiating a conference callInitiating a conference call

Initiating a conference call

Initiating a conference callInitiating a conference call

You can talk to two parties at the same time using the conference call feature of the mobile
phone.

To initiate a conference call:

1. Place a call to
person A.

2. When connected
press (Option),

The display shows
this screen when a
party is placed on
hold.

You must activate the multi-party or conference call service before you can enjoy this
feature. Contact your phone operator for details on this service.

select
the menu, then
press
person A on hold.

3. Press
select

Search NamesSearch Names

Search Names

Search NamesSearch Names
from the menu,

then press
call person B.

Hold Hold

Hold from

Hold Hold

to put

(Option),

New CallNew Call

New Call or

New CallNew Call

to

4343

43

4343

4. Place a call to
person B using the
keypad (when you
selected
or the phone book
(when you selected
Search NamesSearch Names

Search Names).

Search NamesSearch Names

New CallNew Call

New Call),

New CallNew Call

When connected,
the display shows
person B’s name
(or number), photo
(when available),
and duration of the
call.

4444

44

4444

5. Press
then select

Conference Conference

Conference from

Conference Conference
the menu.

(Option),

You can now talk
simultaneously with
person A and B.

Recording a conference callRecording a conference call

Recording a conference call

Recording a conference callRecording a conference call

You can record the proceedings of a conference call using the voice recorder.

To record a conference call:

1. During the
conference call,

press (Option),
select

Record Record

Record from the

Record Record
menu, then

press

2. To stop or pause the
recording, press

(Mute). Press
(Unmute) to

continue recording.

VoiceVoice

Voice

VoiceVoice

.

The voice recorder
records the
conference and
displays the
recording time on
the bottom right
corner of the
display.

You can listen to voice recordings using the Voice Memo application in the Organizer menu.
Refer to Chapter 9 “Organizing your stuff” for more information.

4545

45

4545

Talking privately to a conference call memberTalking privately to a conference call member

Talking privately to a conference call member

Talking privately to a conference call memberTalking privately to a conference call member

You can talk privately to a conference call member using the split feature of the call
conference function.

To talk privately to a conference call member:

1. During the
conference call,

press
select

from the menu, then
press

3. Press (Option),
select

the menu, then
press
selected member
from the conference
call.

(Option),

MembersMembers

Members

MembersMembers

.

Split Split

Split from

Split Split

to split the

2. The display shows
the conference call

members. Press
(up) or (down)

to highlight the
member you want
to privately talk.

You can now talk
to the selected
member privately
while the other
party is placed on
hold.

4646

46

4646

To talk privately to another conference call member:

1. After you finished
talking to the first
conference call

member, press
(Option), select

Swap Swap

Swap from the

Swap Swap
menu, then

press

3. To resume the
conference, press

Conference Conference

Conference from

Conference Conference
the menu, then

press

.

(Option), select

.

2. The other
conference call
member is selected.
You can now talk to
the other member
privately while the
other party is
placed on hold.

4747

47

4747

Terminating a conference call memberTerminating a conference call member

Terminating a conference call member

Terminating a conference call memberTerminating a conference call member

To terminate a member from a conference call:

1. During the
conference call,

press
select

from the menu, then
press

3. Press (Option),
select
menu, then press

(Option),

MembersMembers

Members

MembersMembers

.

End End

End from the

End End

.

2. The display shows
the conference call

members. Press
(up) or (down)

to highlight the
member you want
to terminate from
the conference call.

You may still talk
to the remaining
conference call
member.

4848

48

4848

Ending a conference callEnding a conference call

Ending a conference call

Ending a conference callEnding a conference call

To end a conference call:

During the conference call, press (Option), select
the menu, then press

OROR

OR

OROR

1. During the conference call, press
from the menu, then press

members.

2. Select a member using

3. Repeat the process until all conference call members are terminated.

. The conference call is terminated.

(Option), select

to display the conference call

(up) or (down), then press .

End Call End Call

End Call from

End Call End Call

MembersMembers

Members

MembersMembers

4949

49

4949

Answering a callAnswering a call

Answering a call

Answering a callAnswering a call

When the phone receives an incoming call, it rings, vibrates, or rings and
vibrates depending on your settings.

There are four ways to answer an incoming call.

• Open the phone flip top, then press
on the line.

• Open the phone flip top, then press
from the menu, then press

the party on the line.

• If you selected the “

Settings Settings

the

Settings menu, open the phone flip top, then press any key on

Settings Settings

the keypad. Start talking with the party on the line.

• If you selected the “
Settings Settings

Settings menu, open the phone flip top, then talk with the party

Settings Settings
on the line.

When connected, the main display shows the name or number of the
party calling, call duration, and other call options.

Press
display the call duration and voice recording, if any. The phone returns
to idle mode.

to end the call. A

Any KeyAny Key

Any Key” option as your answering mode in

Any KeyAny Key

FlipFlip

Flip” option as your answering mode in the

FlipFlip

Call Summary Call Summary

Call Summary screen appears briefly to

Call Summary Call Summary

to receive the call. Start talking with

. Start talking with the party

(Option). Select

AnswerAnswer

Answer

AnswerAnswer

5050

50

5050

IncreaseIncrease

Increase

IncreaseIncrease
volumevolume

volume

volumevolume
DecreaseDecrease

Decrease

DecreaseDecrease
volumevolume

volume

volumevolume

Adjusting the ring volumeAdjusting the ring volume

Adjusting the ring volume

Adjusting the ring volumeAdjusting the ring volume

Your mobile phone has a convenient volume control button on the left
side that allows you to quickly increase or decrease the phone volume.

DO NOT set a loud ring tone volume in places of worship, museums,
hospitals and other places where noise is prohibited.

To adjust the ring tone volume using the volume control buttons:

1. Open the phone flip top.

2. Press the upper volume button to increase the ring tone volume, or
the lower volume button to decrease the ring tone volume. You can
also use

(left) or (right) to adjust the volume.

3. Refer to the main display for the volume level.

• The volume control buttons function only when the phone is in
idle mode. The button does not work in any other menu levels.

• See Chapter 4 “Changing the settings” for details on the phone
volume and ring tone settings.

5151

51

5151

Saving a phone number in the phone bookSaving a phone number in the phone book

Saving a phone number in the phone book

Saving a phone number in the phone bookSaving a phone number in the phone book

Using the keypadUsing the keypad

Using the keypad

Using the keypadUsing the keypad

To save a phone number using the keypad:

1. Key-in the phone number using the numeric keys to .

2. When done, press (Save). The

3. Key-in the details of the saved number (name, address, additional
phone numbers, fax number, company phone number, etc.). You can
navigate through the details by pressing

4. When done, press (Save). Otherwise, press (Back) to cancel.

Data saved!Data saved!

A

Data saved! message appears indicating that you have

Data saved!Data saved!

successfully saved the phone number.

See Chapter 5 “Managing your phone book” for more information on
the phone book features.

Add Record Add Record

Add Record screen appears

Add Record Add Record

(up) or (down).

5252

52

5252

Using the Call RecordsUsing the Call Records

Using the Call Records

Using the Call RecordsUsing the Call Records

When you dialed a number, received or missed a call, the number the
called or calling party is automatically saved in the phone call records.
You can save the phone numbers in the call records to your phone book.

To save a dialed, received, or missed call number in the phone book:

1. Press

2. Press

3. Press

4. Key-in the details of the saved number (name, address, additional
phone numbers, fax number, company phone number, etc.). You can
navigate through the details by pressing

5. When done, press

Data saved!Data saved!

A

Data saved! message appears indicating that you have

Data saved!Data saved!

successfully saved the phone number.

once to display the

(up) or (down) to select a call record entry.

(Option), then select

(Save). Otherwise, press (Back) to cancel.

See Chapter 10 “Managing calls and customizing manners” for more
information on call records.

Call Records Call Records

Call Records screen.

Call Records Call Records

Save to Phonebook Save to Phonebook

Save to Phonebook from the menu.

Save to Phonebook Save to Phonebook

(up) or (down).

5353

53

5353

Entering textEntering text

Entering text

Entering textEntering text

You will need to enter text to use several phone functionalities. For example, storing a name
entry in the phone book, creating a text message, or scheduling appointments in your
calendar.

The text editor has three input modes:

English mode

Predictive text (initial CAPS)

Normal text (initial CAPS)

Normal text (all CAPS)

EnglishEnglish

English,

EnglishEnglish

Number/Symbol mode

Symbols

Numbers

Number/SymbolNumber/Symbol

Number/Symbol, and

Number/SymbolNumber/Symbol

Chinese mode

Bopomofo

ChineseChinese

Chinese.

ChineseChinese

Pinyin

Stroke

5454

54

5454

English input modeEnglish input mode

English input mode

English input modeEnglish input mode

Symbol input modeSymbol input mode

Symbol input mode

Symbol input modeSymbol input mode

Chinese input modeChinese input mode

Chinese input mode

Chinese input modeChinese input mode

Changing text input modesChanging text input modes

Changing text input modes

Changing text input modesChanging text input modes

While in the text editing screen, press to select either one of the
text input modes. The currently selected mode is indicated by an icon,

located on the top left corner of the screen.

English text mode

Chinese text mode

Number/symbol mode

After selecting the text input mode, select the text type by

Press toPress to

Press to

Press toPress to

change thechange the

change the

change thechange the

text typetext type

text type

text typetext type

Press toPress to

Press to

Press toPress to

change thechange the

change the

change thechange the

text inputtext input

text input

text inputtext input

modemode

mode

modemode

pressing

. The currently selected text type is highlighted.

The default input mode is English.

5555

55

5555

General rules on text entryGeneral rules on text entry

General rules on text entry

General rules on text entryGeneral rules on text entry

When entering text:

• Use the alphanumeric keys to enter letters, numbers, and symbols.

• Press a key repeatedly until your desired character appears on the screen (refer to the

Character display chart for a list of letters and numbers that each key represents).

• Press
Number/Symbols

• Press to shift between lowercase and uppercase letters, or predictive text and
normal text methods.

• Press

• Press the available navigation keys (indicated on the soft keys bar) to select characters

or words.

to shift between the input modes: English , Chinese , and

.

then to insert a space between words.

The functions of the soft keys and the navigation keys vary on different screens

5656

56

5656

Character chartCharacter chart

Character chart

Character chartCharacter chart

KeyKey

Key

KeyKey

Uppercase (ABC)Uppercase (ABC)

Uppercase (ABC)

Uppercase (ABC)Uppercase (ABC)

Lowercase (abc)Lowercase (abc)

Lowercase (abc)

Lowercase (abc)Lowercase (abc)

. , ! ? 1 @ : ’ ” ( ) % & . , ! ? 1 @ : ’ ” ( ) % &

AA

A

AA

DD

D

DD

GG

G

GG

JJ

J

JJ

MM

M

MM

PP

P

PP

TT

T

TT

WW

W

WW

BB

B

BB

EE

E

EE

HH

H

HH

KK

K

KK

NN

N

NN

QQ

Q

QQ

UU

U

UU

XX

X

XX

CC

C

CC

FF

F

FF

II

I

II

LL

L

LL

OO

O

OO

RR

R

RR

VV

V

VV

YY

Y

YY

22

2

22

33

3

33

44

4

44

55

5

55

66

6

66

SS

S

SS

88

8

88

ZZ

Z

ZZ

77

7

77

99

9

99

aa

a

aa

dd

d

dd

gg

g

gg

jj

j

jj

mm

m

mm

pp

p

pp

tt

t

tt

ww

w

ww

bb

b

bb

ee

e

ee

hh

h

hh

kk

k

kk

nn

n

nn

qq

q

qq

uu

u

uu

xx

x

xx

cc

c

cc

ff

f

ff

ii

i

ii

ll

l

ll

oo

o

oo

rr

r

rr

vv

v

vv

yy

y

yy

22

2

22

33

3

33

44

4

44

55

5

55

66

6

66

ss

s

ss

88

8

88

zz

z

zz

77

7

77

99

9

99

displays other symbols

Pressing while in text input mode toggles the display to numbers/symbols input
mode. Use navigation keys to select the number or symbol, then press . The display

returns to text input mode.

5757

57

5757

English modeEnglish mode

English mode

English modeEnglish mode

PredictivePredictive

Predictive

The English mode features two methods of entering text, predictive
and normal. The

Predictive textPredictive text

Predictive text method allows smart key-in of

Predictive textPredictive text
English words using single keystrokes. For each key you press, the
program looks for possible word matches in the built-in dictionary, and

PredictivePredictive
text inputtext input

text input

text inputtext input

NormalNormal

Normal

NormalNormal

text inputtext input

text input

text inputtext input

displays them on the screen. Thus, you can display and enter a word
using fewer keystrokes than the

Normal textNormal text

The

Normal text method lets you key-in a character (letter, number,

Normal textNormal text

Normal textNormal text

Normal text input.

Normal textNormal text

or symbol) by pressing the assigned key once, twice, or so until your
desired character appears.

To use the predictive text method:

5858

58

5858

For example, if you want to enter the word

1. Press

(P), (H), (O), (N). Press each key once for each

PHONEPHONE

PHONE.

PHONEPHONE

letter. The word PHONE appears on the list right after pressing (N).
This method automatically adds a space after the entered word. See
next page for the screen illustrations.

2. Press

to select and enter the word.

Press to shift from predictive to normal text, and from
uppercase to lowercase letters.

Screen displays using predictive text input

(P) (P)

(P)

(P) (P)

(H) (H)

(H)

(H) (H)

(O) (O)

(O)

(O) (O)

(N) (N)

(N)

(N) (N)

If you press (E), instead of in the above example, the word list displays a different set
of words. Use
word.

to select another word. For example, PHONES. Press to enter the

(E) (E)

(E)

(E) (E)

5959

59

5959

To use the normal text method:

For example, if you want to enter the word phone.

1. Press

2. Press

3. Press

4. Press

5. Press

Chinese modeChinese mode

Chinese mode

Chinese modeChinese mode

The Chinese mode allows you to enter Chinese characters using the
available input methods: Bopomofo, pinyin, and stroke. Use the

navigation keys to select the character, then press

once to key-in

twice to key-in

thrice to key-in

twice to key-in

twice to key-in

A character navigator appears on the top right corner of the main
display showing the character corresponding the number of times
you press a key.

pp

p.

pp

hh

h.

hh

oo

o.

oo

nn

n.

nn

ee

e.

ee

Character navigator

to enter the word.

6060

60

6060

A navigator appears on the bottom right corner of the main display
showing the character corresponding the number of times you
press a key.

Number/Symbol modeNumber/Symbol mode

Number/Symbol mode

Number/Symbol modeNumber/Symbol mode

The Number/Symbol mode allows you to enter numbers and
symbols. Select this mode to key-in numbers and symbols within your

alphabetic text.

To enter numbers:

1. Press to select the number mode (123).

2. Press the keys that correspond to the numbers that you wish to enter.

To enter symbols:

1. Press to select the symbol mode (sym).

2. Press the number keys that correspond to the symbols that you wish
to enter.

OROR

OR

OROR
Use

symbol, then press

(up) or (down) to display other sets of symbols, select a

. See next page on how to display symbols.

6161

61

6161

To display the available symbols:

1. Select the symbol mode (sym). The initial screen displays the first set
of symbols assigned to the number keys. See Screen 1.

2. Press

(down) twice to shift the symbols upward and display
another set. Note that the symbols initially assigned to keys 1, 2, 3,
4, and 5 disappear, and the symbols previously assigned to keys 6, 7,
8, 9, and 0 move up. Compare

Screen 1Screen 1

Screen 1 and

Screen 1Screen 1

Screen 2Screen 2

Screen 2.

Screen 2Screen 2

3. Press the key once more to display another set of symbols. See
Screens 3, 4, and 5.

Screen 1Screen 1

Screen 1

Screen 1Screen 1

The symbol assigned to each number key changes every time you
press the (down) key. For example, depending on the symbols
displayed on the screen, pressing the key enters either a space,

colon (:), quotation mark (”), plus sign (+), greater than sign (>), or
dollar ($) sign. The same variation goes for the other number keys.

Screen 2Screen 2

Screen 2

Screen 2Screen 2

6262

62

6262

Screen 3Screen 3

Screen 3

Screen 3Screen 3

Screen 4Screen 4

Screen 4

Screen 4Screen 4

Screen 5Screen 5

Screen 5

Screen 5Screen 5

This chapter provides information on
how to change the phone settings.
It tells you how to change and
customize your call, display, ring
tone, and phone security settings.

Chapter summaryChapter summary

Chapter summary

Chapter summaryChapter summary

Settings ............................................................................................ 66

Phone Settings .................................................................................. 67

Security ................................................................................ 68

Shortcuts .............................................................................. `75

LED ................................................................................ 77

My Phone Number ...................................................................... 78

Factory Settings ........................................................................ 79

Firmware Version ....................................................................... 80

Display settings ................................................................................ 81

Brightness ................................................................................ 82

Theme ................................................................................ 83

Wallpaper ................................................................................ 84

Power On/Off Animation ............................................................ 86

6464

64

6464

Main Idle Screen ......................................................................... 87

Sub Idle Screen .......................................................................... 88

Clean Wallpaper .......................................................................... 91

Backlight Timer .......................................................................... 92

Sleep Timer ................................................................................ 93

Ringtone ............................................................................................ 94

Incoming ................................................................................ 95

Power On Ringtone .................................................................... 96

Power Off Ringtone .................................................................... 96

Keytone ................................................................................ 97

Composer ................................................................................ 98

Ring mode .............................................................................. 101

Volume .............................................................................. 102

Misc Tones Switch.................................................................... 104

Call Settings .................................................................................... 105

Auto Redial .............................................................................. 106

Speed Dial .............................................................................. 107

Call Waiting .............................................................................. 110

Hide My No. .............................................................................. 111

Call Barring .............................................................................. 112

Call Forwarding ......................................................................... 113

Fixed Dialing ............................................................................. 115

Money Keeper .......................................................................... 117

Call Summary ........................................................................... 120

Answering mode ............................................................................. 121

Accessory Devices .......................................................................... 122

Transmit .......................................................................................... 123

Network Selection ........................................................................... 124

6565

65

6565

Settings

Settings Settings

The

Settings menu allows you to change and customize most of the

Settings Settings
phone settings and network configuration. With the
you can change the phone display, ring tone, call features, security, and
network options.

Settings Settings

Settings menu,

Settings Settings

To access the

1. Put the phone in idle mode, then press to display the main menu.

2. Use the navigation keys to select the

press
OROR

OR

OROR
Press

Settings Settings

The

Settings menu consists of eight menu items that you can select

Settings Settings
using
number before each menu item.

(up) or (down), or by using the keypad to press the

Settings Settings

Settings menu:

Settings Settings

to display the

to display the

Settings Settings

Settings menu.

Settings Settings

Settings Settings

Settings menu.

Settings Settings

Settings Settings

Settings icon , then

Settings Settings

6666

66

6666

Phone Settings

You can change the basic phone settings such as the time, date,
language, phone security, and other phone configuration using this
menu.

To access the

From the
SettingsSettings

Settings, then press

SettingsSettings

OROR

OR

OROR

Press

The
using

Settings Settings

Settings menu, use (up) or (down) to select

Settings Settings

to display the

Phone Settings Phone Settings

Phone Settings menu has nine functions that you can select

Phone Settings Phone Settings

(up) or (down).

Phone SettingsPhone Settings

Phone Settings menu:

Phone SettingsPhone Settings

PhonePhone

Phone

PhonePhone

.

Phone Settings Phone Settings

Phone Settings menu.

Phone Settings Phone Settings

Refer to the previous chapter on how to set the date/time,
language, and greeting text. Proceed to the succeeding sections on
setting the phone security, creating shortcuts, changing the LED,
restoring defaults, and viewing the firmware version.

..

.

..

6767

67

6767

SecuritySecurity

Security

SecuritySecurity

Security Security

The

Security menu allows you to activate, deactivate, or change the

Security Security
phone security settings.

Menu itemMenu item

Menu item

Menu itemMenu item

PINPIN

P I N activate, deactivate, or change your Personal

PINPIN

PIN2PIN2

PIN2 change the second PIN

PIN2PIN2
Network CodeNetwork Code

Network Code change the network code

Network CodeNetwork Code
Phone Lock CodePhone Lock Code

Phone Lock Code activate, deactivate, or change the phone lock code

Phone Lock CodePhone Lock Code

DO NOT change the security settings of your phone if not
necessary. Keep a record of your PIN, PIN2, and other security
codes in a safe place.

Allows you toAllows you to

Allows you to

Allows you toAllows you to

Identification Number (PIN)

6868

68

6868

22

2

22

11

1

11

Activating your PINActivating your PIN

Activating your PIN

Activating your PINActivating your PIN

The default PIN and PIN2 codes come with the SIM card package.
You must key-in the default codes before you can change them.
Refer to the SIM card documentation for information on the PIN
codes and PIN Unblocking Keys (PUK).

To activate the PIN:

1. Highlight

PIN PIN

PIN from the menu, then press (Option).

PIN PIN

2. Select

Activate Activate

Activate from the menu, then press

Activate Activate

.

3. When prompted, key-in the PIN using the numeric keypad, then

33

3

33

press

Set successfully!Set successfully!

A

Set successfully! message appears on screen to indicate that

Set successfully!Set successfully!

.

The SIM card locks if you fail to enter the correct PIN in three
attempts. You need to enter the PIN Unlocking Key (PUK) to unlock
the SIM card.

you have successfully activated the PIN. The display returns to the
Security Security

Security menu. The PIN status on top of the soft key bar now

Security Security
shows

ActivatedActivated

Activated.

ActivatedActivated

• If you have activated the PIN, you are prompted to enter the
PIN everytime you turn on the phone.

• If you have activated the PIN2, you are prompted to enter the
PIN2 before you can modify some vital phone settings such as
FDN, call costs, etc.

6969

69

6969

Changing the PINChanging the PIN

Changing the PIN

Changing the PINChanging the PIN

To change the PIN:

1. Highlight

2. Select

PIN PIN

PIN from the menu, then press (Option).

PIN PIN

Modify Modify

Modify from the menu, then press

Modify Modify

.

3. When prompted, key-in the current PIN using the numeric keypad,
then press

4. Key-in the new PIN using the numeric keypad, then press

.

(down)

to move to the confirmation field.

5. Key-in the new PIN again using the numeric keypad, then press

Set successfully!Set successfully!

A

Set successfully! message appears on screen to indicate that

Set successfully!Set successfully!

.

you have successfully changed the PIN. The display returns to the
Security Security

Security menu.

Security Security

22

2

22

33

3

33

44

4

44

7070

70

7070

55

5

55

Changing the PIN2Changing the PIN2

Changing the PIN2

Changing the PIN2Changing the PIN2

To change the PIN2:

11

1

11

22

2

22

1. Highlight

2. When prompted, key-in the current
then press

PIN2 PIN2

PIN2 from the menu, then press (Modify).

PIN2 PIN2

PIN2PIN2

PIN2 using the numeric keypad,

PIN2PIN2

.

If you are not able to enter the correct PIN in three attempts, the
SIM card locks. You need to enter the PIN Unlocking Key 2 (PUK2)
to unlock the SIM card.

3. Key-in the new PIN2 using the numeric keypad, then press
(down) to move to the confirmation field.

4. Key-in the new PIN2 again using the numeric keypad, then press

Set successfully!Set successfully!

A

Set successfully! message appears on screen to indicate that

Set successfully!Set successfully!

.

you have successfully changed the PIN2. The display returns to the
Security Security

Security menu.

Security Security

You can assign a PIN/PIN2 of up to eight numeric characters.

7171

71

7171

Changing the network codeChanging the network code

Changing the network code

Changing the network codeChanging the network code

The network code is supplied by your phone operator. The network
code is required when enabling some call security features such as
call barring.

To change the network code:

1. Highlight

Network Code Network Code

Network Code from the menu, then press (Option).

Network Code Network Code

11

1

11

2. Select

Modify Modify

Modify from the menu, then press

Modify Modify

.

3. When prompted, key-in the network code provided by your phone
operator, then press

.

4. Key-in the new network code using the numeric keypad, then press

(down) to move to the confirmation field.

5. When prompted, key-in the new network code again, then press

Set successfully!Set successfully!

A

Set successfully! message appears on screen to indicate that

Set successfully!Set successfully!

.

you have successfully changed the network code. The display
returns to the

Security Security

Security menu.

Security Security

22

2

22

7272

72

7272

1

Activating the phone lock codeActivating the phone lock code

Activating the phone lock code

Activating the phone lock codeActivating the phone lock code

• When, you are prompted to enter the code everytime you
turn on the phone.

• You can assign a phone lock code of up to eight numeric
characters.

• The default phone lock code is 0000.

11

11

To activate the phone lock code:

22

2

22

1. Highlight

Phone Lock Code Phone Lock Code

Phone Lock Code from the menu, then press

Phone Lock Code Phone Lock Code

.

2. When prompted, key-in the default phone lock code (0000) using
the keypad, then press

Set successfully!Set successfully!

A

Set successfully! message appears on screen to indicate that

Set successfully!Set successfully!

.

you have successfully activated the PIN. The display returns to the
Security Security

Security menu.

Security Security
The phone lock code status on top of the soft key bar now shows

ActivatedActivated

Activated.

ActivatedActivated

7373

73

7373

Changing the phone lock codeChanging the phone lock code

Changing the phone lock code

Changing the phone lock codeChanging the phone lock code

To change the phone lock code:

1. Highlight

2. Select

Phone Lock Code Phone Lock Code

Phone Lock Code from the menu, then press (Options).

Phone Lock Code Phone Lock Code

Modify Modify

Modify from the menu, then press

Modify Modify

.

3. When prompted, key-in the current phone lock code using the
keypad, then press

.

4. Key-in the new phone lock code using the keypad, then press
(down) to move to the confirmation field.

5. Key-in the new phone lock code again, then press

Set successfully!Set successfully!

A

Set successfully! message appears on screen to indicate that

Set successfully!Set successfully!

.

you have successfully changed the phone lock code . The display
returns to the

Security Security

Security menu.

Security Security

22

2

22

33

3

33

11

1

11

7474

74

7474

44

4

44

55

5

55

1

ShortcutsShortcuts

Shortcuts

ShortcutsShortcuts

Shortcuts Shortcuts

The

Shortcuts menu allows you to create shortcuts for common phone

Shortcuts Shortcuts

features and applications. You can quickly launch the
by pressing

11

11

Creating shortcutsCreating shortcuts

Creating shortcuts

Creating shortcutsCreating shortcuts

To create a shortcut

when the phone is in idle mode.

Shortcuts Shortcuts

Shortcuts menu

Shortcuts Shortcuts

22

2

22

33

3

33

1. Select

2. Select an (EMPTY) shortcut, press
from the menu.

3. Press
available phone features such as SMS, MMS, Camera, etc.

4. Highlight a feature, then press
functions. For example, highlight
SMS commands/functions such as SMS Inbox, SMS Outbox, Edit SMS,
etc.

Shortcut Shortcut

Shortcut from the

Shortcut Shortcut

to display the Shortcut List. The Shortcut List shows all

44

4

44

Phone Settings Phone Settings

Phone Settings menu, then press .

Phone Settings Phone Settings

(Option), then select

to display all specific commands or

SMSSMS

S M S, then press

SMSSMS

to display all

EditEdit

Edit

EditEdit

7575

75

7575

5. Select a command or
function from the
list, then press

.

The Shortcut menu

55

5

55

6. Put the phone in idle
mode, then press

to display the

shortcut list.

66

6

66

shows the created
shortcut.

7. Use the keypad to press the number preceding the shortcut to launch the command or

7676

76

7676

function. Otherwise, press

Deleting shortcutsDeleting shortcuts

Deleting shortcuts

Deleting shortcutsDeleting shortcuts

(Back) to put the phone in idle mode.

To delete a shortcut:

1. Select

Shortcut Shortcut

Shortcut from the

Shortcut Shortcut

2. Highlight the shortcut you want to delete, then press

3. Select

DeleteDelete

Delete from the menu, then press

DeleteDelete

Phone Settings Phone Settings

Phone Settings menu, then press .

Phone Settings Phone Settings

(Option),.

to delete the

highlighted shortcut.
OROR

OR

OROR
Select

Delete All Delete All

Delete All from the menu, then press

Delete All Delete All

to delete all

created shortcuts.

4. When prompted, press
successfully! successfully!

successfully! message appears indicating that you have deleted

successfully! successfully!

(Yes) to delete the shortcut(s). A

SetSet

Set

SetSet

the shortcut(s). The display returns to the Shortcut menu.

33

3

33

11

1

11

LEDLED

LED

LEDLED

This menu allows you to activate the LED for several phone events and
status.

Activating the LEDActivating the LED

Activating the LED

Activating the LEDActivating the LED

To activate the LED for phone events or status:

1. Select

LED LED

LED from the

LED LED

Phone Settings Phone Settings

Phone Settings menu, then press . The

Phone Settings Phone Settings

display shows the available phone events or status.

2. Highlight an item, then press

22

2

22

event or status. A check appears on the box preceding the event or

to activate the LED on the specified

function.

3. The LED is now activated for the phone event or status.
Refer to the table below for LED indications on phone events or
functions. Press

LEDLED

LED

LEDLED

MTC LED when there is an incoming call
Event LED when you have a missed call/unread SMS/MMS message
Charging LED red when the battery is charging
Low Battery red when the battery power is low
Normal LED purple to indicate that the phone is in normal condition

All event or status LED indications are activate by default. To
deactivate the LED for an event or status, highlight the item, then

press to uncheck.

(Back) to return to the previous menu.

If activated, the LED flashesIf activated, the LED flashes

If activated, the LED flashes

If activated, the LED flashesIf activated, the LED flashes

7777

77

7777

My Phone NumberMy Phone Number

My Phone Number

My Phone NumberMy Phone Number

This menu allows you to save and easily retrieve your mobile phone numbers.

To add a phone number:

1. Select
Number Number

Number from the

Number Number
Phone SettingsPhone Settings

Phone Settings

Phone SettingsPhone Settings
menu, then press

My PhoneMy Phone

My Phone

My PhoneMy Phone

.

3. Key-in the contact
name using the

keypad, then press .

33

3

33

2. Press
select

(Option),

Add Add

Add from the

Add Add

menu, then press

11

1

11

4. Key-in the contact
number using the

keypad, then press .
The screen displays

the contact name in
the list.

.

22

2

22

44

4

44

7878

78

7878

5. Press (Back) to return to the previous menu.

Factory SettingsFactory Settings

Factory Settings

Factory SettingsFactory Settings

11

1

11

Factory SettingsFactory Settings

The

Factory Settings

Factory SettingsFactory Settings

all settings to their default values.

Reverting the phone to factory settings erases all previously saved
data in the phone memory and resets all customized settings such
as display, ring tone, and manners. Back up all your contact
information to the SIM card or to your PC (using PC transmit) before
you revert to the factory settings.

Restoring the default settingsRestoring the default settings

Restoring the default settings

Restoring the default settingsRestoring the default settings

To restore the default (factory) settings:

1. Select

22

2

22

press

2. When prompted, enter the phone lock code, then press

3. A confirmation window appears. Press
successfully!successfully!

successfully! message appears to indicate that the phone has

successfully!successfully!
been restored to its original settings. The display returns to the
Phone Settings Phone Settings

Phone Settings menu.

Phone Settings Phone Settings

Factory Settings Factory Settings

Factory Settings from the

Factory Settings Factory Settings

.

menu allows you to reset the device and revert

Phone Settings Phone Settings

Phone Settings menu, then

Phone Settings Phone Settings

(Yes). A

SetSet

Set

SetSet

.

7979

79

7979

Firmware VersionFirmware Version

Firmware Version

Firmware VersionFirmware Version

To view the phone firmware version:

1. Highlight
show the firmware version on top of the soft key bar.

2. Press

Firmware Version Firmware Version

Firmware Version from the

Firmware Version Firmware Version

(Back) to return to the previous menu.

Phone Settings Phone Settings

Phone Settings menu to

Phone Settings Phone Settings

11

1

11

8080

80

8080

Display settings

Display Settings Display Settings

The

Display Settings menu allows you to change various display

Display Settings Display Settings
properties including the theme, wallpaper, animation, backlight,
brightness, and display elements.

To access the

From the
SettingsSettings

Settings, then press

SettingsSettings

OROR

OR

OROR

Press

The

(up) or (down).

Settings Settings

Settings menu, use (up) or (down) to select

Settings Settings

to display the

Display Settings Display Settings

Display Settings has ten functions that you can select using

Display Settings Display Settings

Display Settings Display Settings

Display Settings menu:

Display Settings Display Settings

.

Display Settings Display Settings

Display Settings menu.

Display Settings Display Settings

DisplayDisplay

Display

DisplayDisplay

8181

81

8181

BrightnessBrightness

Brightness

BrightnessBrightness

Brightness Brightness

The

Brightness menu allows you to adjust the main display brightness

Brightness Brightness

level. The display brightness is set to 80% by default.

Adjusting the display brightnessAdjusting the display brightness

Adjusting the display brightness

Adjusting the display brightnessAdjusting the display brightness

To adjust the display brightness:

1. Select

2. Press
brightness. Compare the screens below for reference.

3. When finished, press
Settings Settings

Settings menu.

Settings Settings

10 % brightness10 % brightness

10 % brightness

10 % brightness10 % brightness

Brightness Brightness

Brightness from the

Brightness Brightness

(left) to decrease, or (right) to increase the

Display Settings Display Settings

Display Settings menu, then press .

Display Settings Display Settings

(Back) to return to the

80 % brightness80 % brightness

80 % brightness

80 % brightness80 % brightness

DisplayDisplay

Display

DisplayDisplay

100 % brightness100 % brightness

100 % brightness

100 % brightness100 % brightness

8282

82

8282

ThemeTheme

Theme

ThemeTheme

ThemeTheme

The

Theme

ThemeTheme

themes.

Selecting the color themeSelecting the color theme

Selecting the color theme

Selecting the color themeSelecting the color theme

To select the color theme for your display:

1. Select
The available color themes appear.

2. Press

3. When finished, press (Back) to return to the
Settings Settings

Settings menu.

Settings Settings

menu allows you to select the display color from four preset

Theme Theme

Theme from the

Theme Theme

(up) or (down) to highlight a color theme, then press

to select. Refer to the color themes below for reference.

Display Settings Display Settings

Display Settings menu, then press .

Display Settings Display Settings

DisplayDisplay

Display

DisplayDisplay

SpringSpring

Spring

SpringSpring

SummerSummer

Summer

SummerSummer

FallFall

Fall

FallFall

WinterWinter

Winter

WinterWinter

8383

83

8383

WallpaperWallpaper

Wallpaper

WallpaperWallpaper

Wallpaper Wallpaper

The

Wallpaper menu allows you to select the main and external display wallpapers from

Wallpaper Wallpaper

preset or saved photos, and adjust the time before the wallpaper appears on screen.

Changing the main or external display wallpaperChanging the main or external display wallpaper

Changing the main or external display wallpaper

Changing the main or external display wallpaperChanging the main or external display wallpaper

To change the main or external display wall paper:

8484

84

8484

1. Select
from the
Settings Settings

Settings menu,

Settings Settings
then press
display the wallpaper
menu.

3. Press (up) or
(down) to highlight a

wallpaper, press
(Option), select

As As

A s from the menu,

As As
then press

The screen on the
right shows the
available wallpapers
for the main display.

WallpaperWallpaper

Wallpaper

WallpaperWallpaper

DisplayDisplay

Display

DisplayDisplay

to

SetSet

Set

SetSet

.

2. Highlight
Wallpaper Wallpaper

Wallpaper or

Wallpaper Wallpaper
WallpaperWallpaper

Wallpaper, then

WallpaperWallpaper
press to view
available display
wallpapers.

The screen on the
right shows the
available wallpapers
for the external
display.

MainMain

Main

MainMain

SubSub

Sub

SubSub

Adjusting the wallpaper timerAdjusting the wallpaper timer

Adjusting the wallpaper timer

Adjusting the wallpaper timerAdjusting the wallpaper timer

You can adjust the time before the selected wallpaper appears on the main and external displays.

To adjust the wallpaper timer:

1. Select
from the
Settings Settings

Settings menu,

Settings Settings
then press
display the wallpaper
menu.

3. Highlight the wallpaper timer you wish to use, then press to select.

WallpaperWallpaper

Wallpaper

WallpaperWallpaper

DisplayDisplay

Display

DisplayDisplay

to

2. Highlight
Wallpaper TimerWallpaper Timer

Wallpaper Timer,

Wallpaper TimerWallpaper Timer
then press to
display the wallpaper
timer options.

8585

85

8585

Power On/Off AnimationPower On/Off Animation

Power On/Off Animation

Power On/Off AnimationPower On/Off Animation

Power On/Off Animation Power On/Off Animation

The

Power On/Off Animation menu allows you to select the animation everytime you

Power On/Off Animation Power On/Off Animation

turn the phone on or off. The animation is shows only on the main display.

Changing the power on or off animationChanging the power on or off animation

Changing the power on or off animation

Changing the power on or off animationChanging the power on or off animation

To change the power on or off animation:

1. Select
Off Anim.Off Anim.

Off Anim. from the

Off Anim.Off Anim.
Display SettingsDisplay Settings

Display Settings

Display SettingsDisplay Settings
menu, then press
to display the

available power
on/off animation(s).

3. Press
select

the menu, then
press

5. A

Power On/Power On/

Power On/

Power On/Power On/

(Option),

Set As Set As

Set As from

Set As Set As

.

Set successfully! Set successfully!

Set successfully! message appears to indicate that the power on or off animation is

Set successfully! Set successfully!

2. Press
(down) to highlight
an animation.

4. Select
Anim. Anim.

Anim. to display the

Anim. Anim.
animation everytime
you turn on the phone.

Select
Anim. Anim.

Anim. to display the

Anim. Anim.
animation everytime
you turn off the phone.

(up) or

Power OnPower On

Power On

Power OnPower On

Power OffPower Off

Power Off

Power OffPower Off

8686

86

8686

set. The display returns to the animation list. Press
settings menu.

(Back) to return to the Display

Main Idle ScreenMain Idle Screen

Main Idle Screen

Main Idle ScreenMain Idle Screen

Main Idle Screen Main Idle Screen

The

Mai n I d le Sc r e e n menu allows you to show or hide the items

Main Idle Screen Main Idle Screen
appearing on the main display when the phone is in idle mode. Refer to
the screen below for the location of these items.

OperatorOperator

Operator

OperatorOperator

MannerManner

Manner

MannerManner

DateDate

Date

TimeTime

Time

TimeTime

To show or hide or the main idle screen items:

11

1

11

DateDate

1. Select

press

2. Press

Main Idle Screen Main Idle Screen

Main Idle Screen from the

Main Idle Screen Main Idle Screen

to display a list of main idle screen items.

(up) or (down) to highlight an item, then press to
check or uncheck. Checked items appear on the main display when
the phone is in idle mode.

22

2

22

3. When finished, press
Settings Settings

Settings menu.

Settings Settings

Display Settings Display Settings

Display Settings menu, then

Display Settings Display Settings

(Back) to return to the

DisplayDisplay

Display

DisplayDisplay

8787

87

8787

Sub Idle ScreenSub Idle Screen

Sub Idle Screen

Sub Idle ScreenSub Idle Screen

Sub Idle Screen Sub Idle Screen

The

Sub Idle Screen menu allows you to select the screen for the

Sub Idle Screen Sub Idle Screen

external display when the phone is in idle mode.

To select the external display screen:

1. Select

Sub Idle Screen Sub Idle Screen

Sub Idle Screen from the

Sub Idle Screen Sub Idle Screen

press

to display a list of external display screens.

Display Settings Display Settings

Display Settings menu, then

Display Settings Display Settings

11

1

11

2. Press

(up) or (down) to highlight an item, then press to

select.

3. When you selected

4. Press

(up) or (down) to highlight an item, then press to

NormalNormal

Normal,

NormalNormal

press

(Set).

check or uncheck. Checked items appear on the external display
when the phone is in idle mode.

5. Press

(Back) to return to the previous menu.

33

3

33

55

5

55

44

4

44

8888

88

8888

To display the business clock on the external display:

1. From the
Screen Screen

Screen menu,

Screen Screen
highlight
ClockClock

Clock, then press

ClockClock

Sub IdleSub Idle

Sub Idle

Sub IdleSub Idle

BusinessBusiness

Business

BusinessBusiness

to select.

3. Use the (up) or

(down) button
to select the local
clock, then press

(Option).

2. Press

4. Select

33

3

33

(Set) to

display the local
clock and the visiting
clock.

Set as LocalSet as Local

Set as Local

Set as LocalSet as Local

from the menu, then
press

Successfully!Successfully!

Successfully!

Successfully!Successfully!

. A

SetSet

Set

SetSet

message appears to
indicate that the local
clock synchronized
with the local time
you specified using

Date/TimeDate/Time

the

Date/Time

Date/TimeDate/Time

menu.

8989

89

8989

5. Use the (up) or
(down) button

to select the visiting
clock, then press

(Option).

6. Select the option
Select City Select City

Select City from

Select City Select City
the menu to open

World ClockWorld Clock

the

World Clock

World ClockWorld Clock

55

5

55

screen.

9090

90

9090

7. Use the

(left) or

(right) button to
move the dateline
across the world
map until it is over
the time zone for
the visiting clock.
For example, move
the dateline to the
left to select
(Eastern)(Eastern)

(Eastern).

(Eastern)(Eastern)

USUS

US

USUS

8. Press

to select
the visiting clock
time zone. A
Successfully!Successfully!

Successfully!

Successfully!Successfully!

SetSet

Set

SetSet

message appears to
indicate that the
visiting clock has
been set.

The business clock
now shows the local
time and the visiting
time.

Clean WallpaperClean Wallpaper

Clean Wallpaper

Clean WallpaperClean Wallpaper

Clean Wallpaper Clean Wallpaper

The

Clean Wallpaper feature allows you to hide all the items

Clean Wallpaper Clean Wallpaper

appearing on the main display when the phone is in idle mode.

To enable the clean wallpaper feature:

1. Select
press

11

1

11

2. Press
select.

• When you select

• When you select

2

22

22

• The feature is disabled when you select

3. When finished, press
Settings Settings

Settings menu.

Settings Settings

Clean Wallpaper Clean Wallpaper

Clean Wallpaper from the

Clean Wallpaper Clean Wallpaper

to display the menu options.

(up) or (down) to highlight an item, then press to

display items are hidden and restored when you press any key.

display items are hidden and restored when you press

Display Settings Display Settings

Display Settings menu, then

Display Settings Display Settings

Enable, any key restoreEnable, any key restore

Enable, any key restore, all the main

Enable, any key restoreEnable, any key restore

Enable, OK key restoreEnable, OK key restore

Enable, OK key restore, all the main

Enable, OK key restoreEnable, OK key restore

.

DisableDisable

Disable.

DisableDisable

(Back) to return to the

DisplayDisplay

Display

DisplayDisplay

9191

91

9191

Backlight TimerBacklight Timer

Backlight Timer

Backlight TimerBacklight Timer

The backlight timer allows you to specify a time before the LCD display
backlight turns off.

Setting a shorter backlight timer saves battery power.

To set the backlight timer:

9292

92

9292

1. Select the
menu, then press

2. From the
the backlight turns off, then press

3. Press

Backlight Timer Backlight Timer

Backlight Timer item from the

Backlight Timer Backlight Timer

.

Backlight Timer Backlight Timer

Backlight Timer list, highlight the desired time before

Backlight Timer Backlight Timer

(Back) to return to the

Display SettingsDisplay Settings

Display Settings

Display SettingsDisplay Settings

to select.

Display Settings Display Settings

Display Settings menu.

Display Settings Display Settings

11

1

11

22

2

22

Sleep TimerSleep Timer

Sleep Timer

Sleep TimerSleep Timer

The sleep timer allows you to specify a time before the main and
external display turns off.

Setting a shorter sleep timer saves battery power.

To set the sleep timer:

1. Select the
then press .

11

1

11

2. From the
the main and external display turns off, then press

3. Press

22

2

22

Sleep Timer Sleep Timer

Sleep Timer item from the

Sleep Timer Sleep Timer

Sleep Timer Sleep Timer

Sleep Timer options, highlight the desired time before

Sleep Timer Sleep Timer

(Back) to return to the

Display Settings Display Settings

Display Settings menu.

Display Settings Display Settings

Display Settings Display Settings

Display Settings menu,

Display Settings Display Settings

to select.

9393

93

9393

Ringtone

Ringtone Ringtone

The

Ringtone menu allows you to select, change, adjust, and compose

Ringtone Ringtone

the phone ring tone

To access the

From the
RingtoneRingtone

Ringtone, then press

RingtoneRingtone

OROR

OR

OROR

Press

The

(up) or (down).

Settings Settings

Settings menu, use (up) or (down) to select

Settings Settings

to display the

Ringtone Ringtone

Ringtone menu has eight options that you can select using

Ringtone Ringtone

Ringtone Ringtone

Ringtone menu:

Ringtone Ringtone

.

Ringtone Ringtone

Ringtone menu.

Ringtone Ringtone

9494

94

9494

1

IncomingIncoming

Incoming

IncomingIncoming

The phone comes with 20 pre-installed polyphonic ring tones that you
can select using the

To set the incoming ring tone:

11

11

1. Select

IncomingIncoming

Incoming from the

IncomingIncoming

Incoming Incoming

Incoming ring tone

Incoming Incoming

RingtoneRingtone

Ringtone menu, then press .

RingtoneRingtone

menu.

2

2. Highlight a ring tone to play using
press

3. Click

22

22

to rename, compose, or delete a ring tone.

to select.

You may assign a different incoming ring tone for a particular phone
number. See Chapter 5 “Managing your phone book” for details.

(Back) to return to the

(up) or (down), then

RingtoneRingtone

Ringtone menu, or (Option)

RingtoneRingtone

9595

95

9595

Power On RingtonePower On Ringtone

Power On Ringtone

Power On RingtonePower On Ringtone

Power On Ringtone Power On Ringtone

The

Power On Ringtone menu allows you to select the tone played everytime you turn on the phone.

Power On Ringtone Power On Ringtone

To set the power on ring tone:

1. Select
RingtoneRingtone

Ringtone from the

RingtoneRingtone
RingtoneRingtone

Ringtone menu,

RingtoneRingtone
then press

Power Off RingtonePower Off Ringtone

Power Off Ringtone

Power Off RingtonePower Off Ringtone

Power Off Ringtone Power Off Ringtone

The

Power Off Ringtone menu allows you to select the tone played everytime you turn off the phone.

Power Off Ringtone Power Off Ringtone

To set the power off ring tone:

1. Select
RingtoneRingtone

Ringtone from the

RingtoneRingtone
RingtoneRingtone

Ringtone menu,

RingtoneRingtone
then press

Power OnPower On

Power On

Power OnPower On

.

Power OPower O

Power O

Power OPower O

ffff

ff

ffff

.

2. Highlight a ring tone
to play using
(up) or (down),
then press
select.

3. Click (Back) to
return to the

RingtoneRingtone

Ringtone menu.

RingtoneRingtone

2. Highlight a ring tone
to play using
(up) or (down),
then press
select.

to

to

9696

96

9696

3. Click (Back) to
return to the

RingtoneRingtone

Ringtone menu.

RingtoneRingtone

KeytoneKeytone

Keytone

KeytoneKeytone

The keytone sounds off everytime you press a key on the keypad.

To select a keytone:

1. Select
from the
menu, then press

KeytoneKeytone

Keytone

KeytoneKeytone

RingtoneRingtone

Ringtone

RingtoneRingtone

2. Highlight a key tone
using

.

(down), then
press

3. Click (Back) to
return to the

RingtoneRingtone

Ringtone menu.

RingtoneRingtone

(up) or

to select.

9797

97

9797

ComposerComposer

Composer

ComposerComposer

In addition to the pre-installed ringtones, you can compose five ring
tones, each with up to 200 notes, if you know how to compose with
musical notes.

Composing a ring toneComposing a ring tone

Composing a ring tone

Composing a ring toneComposing a ring tone

To compose a ring tone:

11

1

11

9898

98

9898

1. Select

Composer Composer

Composer from the

Composer Composer

RingtoneRingtone

Ringtone menu, then press to

RingtoneRingtone

display the list of composed ring tones.

2. Highlight an
ComposeCompose

Compose. The music staff appears on screen.

ComposeCompose

(EMPTY)(EMPTY)

(EMPTY) ring tone, press

(EMPTY)(EMPTY)

(Option), then select

3. Use the keypad button to key-in the notes. Refer to the table below
for the musical note equivalents of the keypad buttons.

KeyKey

Key

KeyKey

1 Do 8 Rest
2 Re 9 longer beat
3 Mi 0 dotted note
4 Fa * octave
5 Sol # short beat
6 La half note lower
7 Si half note higher

Note/BeatNote/Beat

Note/Beat

Note/BeatNote/Beat

KeyKey

Key

KeyKey

Note/BeatNote/Beat

Note/Beat

Note/BeatNote/Beat

33

3

33

22

2

22

4. When done, press
(Option), select

InstrumentInstrument

Instrument,

InstrumentInstrument
press

then

to display
the available
instrument sounds
that you can use.

5. Use

(up) or
(down) to highlight
an instrument, then
press

Press

to select.

(Back) to

return to your
composition.

6. Press (Option),
select
then press

TempoTempo

Tempo,

TempoTempo

to
display the available
tempo you can use
for the composed
ring tone.

A low number option means a slow tempo. The higher the number you select, the faster the
tempo. You may try several tempos until you find the appropriate one for your ring tone.

7. Use

to
highlight a tempo,
then press

(Back) to listen to
your composition.

9999

99

9999

8. Press (Option), select

PlayPlay

Play,

PlayPlay

then press to listen to your

composition. When playing, press

9. When finished, press
text input screen appears.

10. Key-in a name for the composed ringtone, then press
successfully!successfully!

successfully! message appears indicating that you have

successfully!successfully!
successfully composed and saved the new ringtone.

11. The new ring tone is displayed in the Composer list. Press

(Option), select

(Stop) to stop.

SaveSave

Save,

SaveSave

then press . The

. A

SetSet

Set

SetSet

100100

100

100100

(Back) to return to the

Ringtone Ringtone

Ringtone menu.

Ringtone Ringtone