Page 1
Xonar D1
Audio card
User manual
Page 2
E7810
Revised Edition V2
October 2012
Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
2
ASUS Xonar D1
Page 3
Contents
Notices .......................................................................................................... 5
Safety information ....................................................................................... 6
Trademarks ................................................................................................... 6
License ......................................................................................................... 6
1. Introduction .....................................................................................
1.1 Package contents ..............................................................
1.2 System requirements .........................................................
1.3
2. Hardware overview .......................................................................
3. Installing the Xonar Hardware .....................................................
3.1 Preparing your computer .................................................
3.2 Installing the audio card ...................................................
3.3 Connecting to a graphics card with HDMI support ...........
3.4 Connecting a TV tuner card .............................................
4. Installing Software ........................................................................
5. Connecting Speakers and Peripherals .......................................
5.1 Connecting Digital Speaker Systems (Home Theater) ....
5.2 Connecting Headphones .................................................
5.3 Connecting Analog Speaker Systems ..............................
5.4 Connecting Microphone ...................................................
5.5 Connecting Line-In Audio Sources ...................................
6. Xonar D1 Driver Guide ..................................................................
6.1 Introduction to the Xonar D1 Audio Center GUI ...............
6.2 Main Setting .....................................................................
6.3 Mixer/Volume ...................................................................
6.4 Effects ..............................................................................
6.5 Karaoke/Magic Voice .......................................................
6.6 FlexBass ..........................................................................
6.7 AEC (Acoustic Echo Cancellation) ...................................
6.8 Smart Volume Normalization ...........................................
6.9 DS3D GX and DSP Modes ..............................................
6.10 VocalFX ............................................................................
6.11 ASIO 2 Driver ...................................................................
7. RMAA Test Guide ..........................................................................
7.1 Setting Up Xonar D1 Audio Card .....................................
Specications summary ..................................................... 8
7
7
7
10
12
12
12
13
14
15
16
16
17
19
24
24
25
25
27
35
38
40
41
42
43
45
46
50
54
54
ASUS Xonar D1
3
Page 4
Contents
7.2 Conguration and Test with RMAA................................... 57
7.3 RMAA Testing Results
8. RightMark Audio Analyzer test ....................................................
9. Troubleshooting and FAQs ..........................................................
[Troubleshooting] ............................................................................ 68
[FAQs] .........................................................................................
...................................................... 62
63
68
70
4
ASUS Xonar D1
Page 5
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
Australia statement notice
From 1 January 2012 updated warranties apply to all ASUS products, consistent with
the Australian Consumer Law. For the latest product warranty details please visit
http://support.asus.com. Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
If you require assistance please call ASUS Customer Service 1300 2787 88 or visit
us at http://support.asus.com.
ASUS Xonar D1
5
Page 6
Safety information
•
Before installing the device on a motherboard, carefully read all the manuals
that came with the package.
•
To prevent electrical shock hazard or short circuits, switch off the power supply
before installing the device on a motherboard or connecting any signal cables
to the device.
•
If the device is broken, do not try to x it by yourself. Contact a qualied service
technician or your retailer.
•
Before using the product, make sure all cables are correctly connected. If you
detect any damage, contact your dealer immediately.
•
To avoid short circuits, keep paper clips, screws, and staples away from
connectors, sockets and circuitry.
•
Avoid dust, humidity, and temperature extremes. Do not place the product in
any area where it may become wet.
•
Place the product on a stable surface.
•
If you encounter technical problems with the product, contact a qualied
service technician or your retailer.
This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment and mercury-containing button cell battery) should not
be placed in municipal waste. Check local regulations for disposal of electronic
products.
Trademarks
Xonar and ASUS logo are trademarks of ASUSTek Computer Inc. “Dolby”
and “Dolby Digital Live”, “Dolby Pro Logic IIx”, “Dolby Virtual Speaker”, “Dolby
Headphone” are trademarks of Dolby Laboratories. “DTS” and “DTS CONNECT”,
“DTS Interactive”, “DTS Neo: PC” are trademarks of Digital Theater Systems,
Inc. EAX and A3D are trademarks of Creative Technology Ltd. Microsoft,
DirectSound3D, Windows are trademarks of Microsoft Corporation. Other company
and product names may be trademarks of the respective companies with which
they are associated. ASIO is a trademark and software of Steinberg Media
Technologies GmbH.
License
Dolby Master Studio driver is manufactured under license from Dolby Laboratories;
DTS Connect driver is manufactured under license from Digital Theater Systems,
Inc.
6
ASUS Xonar D1
Page 7
1. Introduction
1.1 Package contents
• ASUS Xonar D1 audio card
• ASUS Xonar D1 support CD (including RMAA V6.0.6 utility)
• Additional low-prole bracket
• S/PDIF TOSLINK optical adapter x1
• Quick Installation Guide
1.2 System requirements
• One PCI compatible slot for the audio card
• Microsoft
• Intel
• 256 MB DRAM system memory
• 60 MB available HDD space for driver installation package
• CD-ROM drive (or DVD-ROM drive) for software installation
• High-quality headphones, powered analog speakers, or digital speakers with
Dolby Digital decoder to enjoy the Ultra-High Fidelity sounds of the card
®
Windows® Vista/XP(32/64bit)/MCE2005
®
Pentium® 4 1.4GHz or AMD Athlon 1400 CPU or faster CPU
ASUS Xonar D1
7
Page 8
1.3 Specications summary
Items
Description
Audio Performance
Output Signal-to-Noise Ratio (A-Weighted):
116 dB for Front-out
112dB for other channels
Input Signal-to-Noise Ratio (A-Weighted):
112dB
Output Total Harmonic Distortion + Noise at 1kHz
(-3dB) :
0.00056% (-105dB) for Front-out
Input Total Harmonic Distortion + Noise at 1kHz
(-3dB) :
0.0004% (-108dB) for Line-in
Frequency Response (-3dB, 24-bit/96kHz format):
<10Hz to 48KHz
Output/Input Full-Scale Voltage
2 Vrms (5.65 Vp-p)
Bus Compatibility
PCI Express
-PCI Express Rev.1.0a specification compatible
-Max. full 2.5Gbps bandwidth per direction and optimized
latency for high-definition audio processing
-Compatible with X1, X4, X8, X16 PCI Express slots
Main Chipset
Audio Processor
ASUS AV100 High-Definition Sound Processor (Max.
192KHz/24bit)
24-bit D-A Converter of Digital Sources:
Cirrus-Logic CS4398*1 for Front-Out (120dB SNR, Max.
192kHz/24bit)
Cirrus-Logic CS4362A*1 for other 6 channels (114dB
SNR, Max. 192kHz/24bit)
24-bit A-D Converter for Analog Inputs:
Cirrus-Logic CS5361* 1 (114dB SNR, Max. 192kHz/24bit)
Sample Rate and Resolution
Analog Playback Sample Rate and Resolution
44.1K/48K/96K/192KHz @ 16/24bit
Analog Recording Sample Rate and Resolution
44.1K/48K/96K/192KHz @ 16/24bit
S/PDIF Digital Output
44.1K/48K/96K/192KHz @ 16/24bit, Dolby Digital, DTS
I/O Ports
Analog Output Jack:
3.50mm mini jack *4 (Front/Side/Center-Subwoofer/
Back)
Analog Input Jack:
3.50mm mini jack *1 (Shared by Line-In/Mic-In)
Other line-level analog input (for TV Tuner or CDROM):
Aux-In (4-pin header on the card)
Digital S/PDIF Output
High-bandwidth TOS-Link optical transmitter (shared with
Line-In/Mic-In jack) supports 192KHz/24bit
Items
Description
Audio Performance
Output Signal-to-Noise Ratio (A-Weighted):
116 dB for Front-out
112dB for other channels
Input Signal-to-Noise Ratio (A-Weighted):
112dB
Output Total Harmonic Distortion + Noise at 1kHz
(-3dB) :
0.00056% (-105dB) for Front-out
Input Total Harmonic Distortion + Noise at 1kHz
(-3dB) :
0.0004% (-108dB) for Line-in
Frequency Response (-3dB, 24-bit/96kHz format):
<10Hz to 48KHz
Output/Input Full-Scale Voltage
2 Vrms (5.65 Vp-p)
Items
Description
Audio Performance
Output Signal-to-Noise Ratio (A-Weighted):
116 dB for Front-out
112dB for other channels
Input Signal-to-Noise Ratio (A-Weighted):
112dB
Output Total Harmonic Distortion + Noise at 1kHz
(-3dB) :
0.00056% (-105dB) for Front-out
Input Total Harmonic Distortion + Noise at 1kHz
(-3dB) :
0.0004% (-108dB) for Line-in
Frequency Response (-3dB, 24-bit/96kHz format):
<10Hz to 48KHz
Output/Input Full-Scale Voltage
2 Vrms (5.65 Vp-p)
Bus Compatibility
PCI Express
-PCI Express Rev.1.0a specification compatible
-Max. full 2.5Gbps bandwidth per direction and optimized
latency for high-definition audio processing
-Compatible with X1, X4, X8, X16 PCI Express slots
Main Chipset
Audio Processor
ASUS AV100 High-Definition Sound Processor (Max.
192KHz/24bit)
24-bit D-A Converter of Digital Sources:
Cirrus-Logic CS4398*1 for Front-Out (120dB SNR, Max.
192kHz/24bit)
Cirrus-Logic CS4362A*1 for other 6 channels (114dB
SNR, Max. 192kHz/24bit)
24-bit A-D Converter for Analog Inputs:
Cirrus-Logic CS5361* 1 (114dB SNR, Max. 192kHz/24bit)
Sample Rate and Resolution
Analog Playback Sample Rate and Resolution
44.1K/48K/96K/192KHz @ 16/24bit
Analog Recording Sample Rate and Resolution
44.1K/48K/96K/192KHz @ 16/24bit
S/PDIF Digital Output
44.1K/48K/96K/192KHz @ 16/24bit, Dolby Digital, DTS
I/O Ports
Analog Output Jack:
3.50mm mini jack *4 (Front/Side/Center-Subwoofer/
Back)
Analog Input Jack:
3.50mm mini jack *1 (Shared by Line-In/Mic-In)
Other line-level analog input (for TV Tuner or CD-
ROM):
Aux-In (4-pin header on the card)
Digital S/PDIF Output
High-bandwidth TOS-Link optical transmitter (shared with
Line-In/Mic-In jack) supports 192KHz/24bit
Driver Features
Operation System
Windows Vista(32/64bit)/XP(32/64bit)/MCE2005
Dolby Digital Live
Dolby Digital Live encodes any audio signal on PC in realtime to Dolby Digital (AC3) 5.1 surround sounds to your
home theater environment through one single S/PDIF
connection
Dolby Headphone
Dolby Headphone technology allows users to listen to
music, watch movies, or play games with the dramatic
5.1-channel surround or realistic 3D spacious effects
through any set of stereo headphones.
Dolby Virtual Speaker
Dolby Virtual Speaker technology simulates a highly
realistic 5.1-speaker surround sound listening
environment from as few as two speakers.
Dolby Pro-Logic IIx
Dolby Pro-Logic II is the well-known technology to
process any native stereo or 5.1-channel audio into a
6.1- or 7.1- channel output, creating a seamless, natural
surround soundfield.
DirectSound3D Game EXtensions 2.0 & 1.0 (DS3D
GX 2.0)
-DS3D GX 2.0 supports EAX gaming sound effects and
DirectSound 3D hardware enhanced functions for more
games on Windows Vista & XP. (DirectX/DirectSound 3D
compatible)
-DS3D GX 2.0 adds latest VocalFX voice effects for online
gaming or chatting.
VocalFX
TM
Xonar DX provides VocalFX, the latest vocal effect
technologies for gaming and VoIP, including:
-VoiceEX: produces vivid environmental reverberation for
your voice in EAX games
-ChatEX: emulates different background environment
effects when you chat online
-Magic Voice: changes your voice pitch to different types
(Monster/Cartoon…) for disguising your real voice or just
for fun in online chatting
S/PDIF header on card for connection with supported VGA card
8
D1
(continued on the next page)
ASUS Xonar D1
Page 9
*Specications are subject to change without notice.
Items
Description
Audio Performance
Output Signal-to-Noise Ratio (A-Weighted):
116 dB for Front-out
112dB for other channels
Input Signal-to-Noise Ratio (A-Weighted):
112dB
Output Total Harmonic Distortion + Noise at 1kHz
(-3dB) :
0.00056% (-105dB) for Front-out
Input Total Harmonic Distortion + Noise at 1kHz
(-3dB) :
0.0004% (-108dB) for Line-in
Frequency Response (-3dB, 24-bit/96kHz format):
<10Hz to 48KHz
Output/Input Full-Scale Voltage
2 Vrms (5.65 Vp-p)
Bus Compatibility
PCI Express
-PCI Express Rev.1.0a specification compatible
-Max. full 2.5Gbps bandwidth per direction and optimized
latency for high-definition audio processing
-Compatible with X1, X4, X8, X16 PCI Express slots
Main Chipset
Audio Processor
ASUS AV100 High-Definition Sound Processor (Max.
192KHz/24bit)
24-bit D-A Converter of Digital Sources:
Cirrus-Logic CS4398*1 for Front-Out (120dB SNR, Max.
192kHz/24bit)
Cirrus-Logic CS4362A*1 for other 6 channels (114dB
SNR, Max. 192kHz/24bit)
24-bit A-D Converter for Analog Inputs:
Cirrus-Logic CS5361* 1 (114dB SNR, Max. 192kHz/24bit)
Sample Rate and Resolution
Analog Playback Sample Rate and Resolution
44.1K/48K/96K/192KHz @ 16/24bit
Analog Recording Sample Rate and Resolution
44.1K/48K/96K/192KHz @ 16/24bit
S/PDIF Digital Output
44.1K/48K/96K/192KHz @ 16/24bit, Dolby Digital, DTS
I/O Ports
Analog Output Jack:
3.50mm mini jack *4 (Front/Side/Center-Subwoofer/
Back)
Analog Input Jack:
3.50mm mini jack *1 (Shared by Line-In/Mic-In)
Other line-level analog input (for TV Tuner or CD-
ROM):
Aux-In (4-pin header on the card)
Digital S/PDIF Output
High-bandwidth TOS-Link optical transmitter (shared with
Line-In/Mic-In jack) supports 192KHz/24bit
Driver Features
Operation System
Windows Vista(32/64bit)/XP(32/64bit)/MCE2005
Dolby Digital Live
Dolby Digital Live encodes any audio signal on PC in real-
time to Dolby Digital (AC3) 5.1 surround sounds to your
home theater environment through one single S/PDIF
connection
Dolby Headphone
Dolby Headphone technology allows users to listen to
music, watch movies, or play games with the dramatic
5.1-channel surround or realistic 3D spacious effects
through any set of stereo headphones.
Dolby Virtual Speaker
Dolby Virtual Speaker technology simulates a highly
realistic 5.1-speaker surround sound listening
environment from as few as two speakers.
Dolby Pro-Logic IIx
Dolby Pro-Logic II is the well-known technology to
process any native stereo or 5.1-channel audio into a
6.1- or 7.1- channel output, creating a seamless, natural
surround soundfield.
DirectSound3D Game EXtensions 2.0 & 1.0 (DS3D
GX 2.0)
-DS3D GX 2.0 supports EAX gaming sound effects and
DirectSound 3D hardware enhanced functions for more
games on Windows Vista & XP. (DirectX/DirectSound 3D
compatible)
-DS3D GX 2.0 adds latest VocalFX voice effects for online
gaming or chatting.
VocalFX
TM
Xonar DX provides VocalFX, the latest vocal effect
technologies for gaming and VoIP, including:
-VoiceEX: produces vivid environmental reverberation for
your voice in EAX games
-ChatEX: emulates different background environment
effects when you chat online
-Magic Voice: changes your voice pitch to different types
(Monster/Cartoon…) for disguising your real voice or just
for fun in online chatting
Acoustic Echo Cancellation (AEC)
Provides advanced Acoustic Echo Cancellation (AEC,
eliminates up-to-40dB speaker echo return) and noise
suppression technologies for best voice communication
quality in VOIP applications or online gaming
Smart Volume Normalizer
TM
Normalizes the volume of all audio sources into a
constant level and also enhances your 3D sound listening
range and advantages in gaming
Karaoke Functions
Music Key-Shifting and Microphone Echo effects like
professional Karaoke machine
FlexBass
TM
Professional Bass Management/Enhancement system
Xear 3DTM Virtual Speaker Shifter
Virtual 7.1 speaker positioning
Other Effects
10-band Equalier/27 Environment Effects
3D Gaming Sound Engines/APIs
DirectSound3D GX 2.0 & 1.0, EAX2.0&1.0,
DirectSound HW, DirectSound SW, A3D1.0, OpenAL
generic modes, 128 3D sounds processing capability
ASIO 2.0 Driver Support:
Supports 44.1K/48K/96K/192KHz @16/24bit with very
low latency
Software Utility
Portable Music Processor Lite utility
Converts digital music content or CD audio into regular
MP3/WMA files with DolbyHeadphone, Dolby Virtual
Speaker (w/ Pro-Logic II), and Smart Volume
Normalization processing (Windows Media Player 10 or
above is required)
MCE Software Kit
Software kit with 10-ft GUI for Windows Media Center
Edition
RightMark Audio Analyzer 6.0.6
Easy but powerful software intended for testing the
quality of audio equipments
ASUS Xonar D1
9
Page 10
2. Hardware overview
Xonar D1 layout
6
1
2
3
4
5
7
1
8
10
2
3
4
5
ASUS Xonar D1
Page 11
No Item Description
1 Microphone jack
Connect your external PC microphone to this 3.5mm jack
for voice input. Built-in high-quality Microphone pre-
amplier.
1 Line Input jack
Connect analog devices like MP3 players, CD players,
music synthesizers and other line-level sound sources
to this 3.5mm jack for audio recording or processing.
(Through Ultra-high delity 115dB SNR A-D converter)
1 S/PDIF Output jack
Optical S/PDIF output jack. Connects to an external
digital decoder or digital speaker systems, Home Theater
systems, AV receivers for outputting digital audio including
PCM, Dolby Digital, DTS, WMA-Pro, etc.
2 Headphone/Front
Output jack
Connect your headphones or 2/2.1 channel speakers to
this jack. For multi-channel speaker systems, connects to
the front left/right input on the powered speakers.
3 Side Surround Output
jack
4 Center/Subwoofer
Output jack
5 Rear/back Surround
Output Jack
6 Front panel audio
header
Connects to the surround channel input on
4/4.1/5.1/6.1/7.1 powered analog speakers.
Connects to the front center/subwoofer input on 5.1/6.1/7.1
powered analog speakers.
Connects to the Back Surround input on 6.1/7.1 powered
analog speakers.
Connect one end of the front panel audio cable to the front
panel audio header on the D1 card, the other end to the
chassis-mounted front panel audio I/O module on your
motherboard.
7 Aux Input Header
4-pin header. Usually connects to the Analog Audio output
of TV tuner card or other sound source inside your PC
system. (To monitor your TV tuner card’s audio from this
Aux-In, you must enable the “monitor” function for Aux-In in
the Xonar Audio Center software’s recording mixer.)
8 S/PDIF Out Header
Connects to the graphics card with HDMI support.
ASUS Xonar D1
11
Page 12
3. Installing the Xonar Hardware
3.1 Preparing your computer
Before you proceed with the following installation steps, it’s recommended that you
disable your onboard audio device in your BIOS settings, or uninstall any other
sound cards on your PC. (For BIOS setting or uninstallation of other sound cards,
refer to the user manuals of your motherboard and sound card)
1. Power off your computer and disconnect the power cord.
2. Open the computer’s case.
3. Remove the metal brackets from one unused PCI slot for the audio card.
3.2 Installing the audio card
1. Face the bracket of the Xonar D1 audio card toward the back panel of your
computer and insert the audio card gently into an available PCI Express
slot. Make sure it’s completely inserted into the PCI Express slot. (Warning!
Do not force the audio card into the slot. Make sure that the gold pins of
the card's PCI Express connector are aligned with the motherboard’s PCI
Express connector before you insert the card into the PCI Express slot. If it
does not t properly, gently remove it and try again.)
2. Secure the audio card bracket to the back of your computer with the screw
that you removed. Refer to section 3.1.
12
ASUS Xonar D1
Page 13
3.3 Connecting to a graphics card with HDMI support
1. Install a graphics card with HDMI output support.
2. Using the bundled S/PDIF cable, connect one end to the 3-pin S/PDIF Out
header on the Xonar D1 audio card, and connect the other end to the 2-pin
S/PDIF In header on the graphics card.
S/PDIF cable
Graphics card
Xonar D1
ASUS Xonar D1
13
Page 14
3.4 Connecting a TV tuner card
1.
If you have a traditional PCI or PCI Express TV tuner card on your PC, you
may need to connect it to the audio card to send the tuner card’s sound to
your PC speakers.
2. Secure the PCI/PCI Express TV tuner card and screw it into the back-panel.
3. Connect the audio output header from the TV tuner card to the Aux-In header
of the audio card, as shown in the gure below.
For optimum TV audio quality, Xonar uses ADC recording to digitize the signal
and loops it back to DAC playback. Please select Aux-In as the recording
source in the Xonar Audio Center’s recording mixer and enable the monitoring
button to pass this signal to the audio output. Using this setup, you can even
turn on sound effects such as Pro-Logic IIx to expand the stereo TV audio to 5.1
or 7.1 channel surround sound. TV audio on your PC will become even better
than on your TV set!
TV tuner card
14
Xonar D1
ASUS Xonar D1
Page 15
4. Installing Software
Installing the audio card driver
1. After you have installed the audio card, turn on your computer. Windows®
automatically detects the audio card and searches for device drivers. When
prompted for the drivers, click Cancel.
2. Insert the support CD into the optical drive. If Autorun is enabled in your
system, the setup starts automatically. If not, run setup.exe from your
support CD.
3. Follow the instructions on the screen to complete the installation. Read the
“END USER LICENCE AGREEMENT” in the process and make sure you
understand and accept it before you continue the installation. When the
installation nishes, you may be prompted to restart your computer. You can
choose to restart the computer later if desired.
ASUS Xonar D1
15
Page 16
5. Connecting Speakers and Peripherals
5.1 Connecting Digital Speaker Systems (Home Theater)
The Xonar D1 supports Dolby Digital Live technology, which transcode any
audio, including games and music, into industry-standard Dolby Digital surround
bit-streams. This makes playback through your home theater system possible,
creating an immersive and impressive cinema surround sound experience. A single
digital cable connection can carry high-quality Dolby Digital digital audio from
any of your PC audio sources to any digital speakers or AV Receivers with Dolby
Digital decoding capabilities.
1
No Item Description
1 Optical adapter
2 Optical cable
16
Plug the optical TOSLINK adapter into the S/PDIF-Out
connector.
Connect your decoder’s S/PDIF-In port to the optical adapter
with the TOSLINK optical cable
2
ASUS Xonar D1
Page 17
5.2 Connecting Headphones
5.2.1 Connecting Stereo Headphones
No Item Description
1 Front Out/Headphone
Jack
The Front Out jack has a built-in high-quality amplier to
drive headphones. Connect your stereo headphones directly
to this jack.
1
ASUS Xonar D1
17
Page 18
5.2.2 Connecting 5.1 channel Headphones
1
2
3
No Item Description
1 Front Out
Connect the front-channel 3.5mm plug of your 5.1
headphones into this jack.
2 Side Surround Out
Connect the surround-channel 3.5mm plug of your 5.1
headphone into this jack.
3 Center/Subwoofer Out
Connect the Center/Bass-channel 3.5mm plug of your 5.1
headphone into this jack.
18
ASUS Xonar D1
Page 19
5.3 Connecting Analog Speaker Systems
5.3.1 Connecting Analog Power Amplier
No Item Description
1 Front Out
2 Side Surround Out
3 Center/Subwoofer
4 Back Surround Out
Connects to the “left front” and “right front” input ports of the
analog amplier with the mini-jack to RCA cable.
Connects to the “left surround” and “right surround” input
ports of the analog amplier with the mini-jack to RCA cable.
Connects to the “Center” and “subwoofer” input ports of the
analog amplier with the mini-jack to RCA cable.
Connects to the “left back” and “right back” input ports of the
analog amplier with the mini-jack to RCA cable.
1
2
3
4
ASUS Xonar D1
19
Page 20
5.3.2 Connecting 2/2.1 Channel Speakers
2 Speakers
2.1 Speakers
1
No Item Description
1 Front Out/Headphone
Jack
Connect the 2/2.1 speaker set’s 3.5mm plug into this Front
Out jack.
20
1
ASUS Xonar D1
Page 21
5.3.3 Connecting 4/4.1 Channel Speakers
4 Speakers
4.1 Speakers
1
2
No Item Description
1 Front Out
Connects to the Front input port of the 4/4.1 speakers with
the mini-jack cable.
2 Side Surround Out
Connects to the Surround input port of the 4/4.1 speakers
with the mini-jack cable.
ASUS Xonar D1
1
2
21
Page 22
5.3.4 Connecting 5.1 Channel Speakers
5.1 Speakers
No Item Description
1 Front Out
Connects to the Front input port of the 5.1 speakers with the
mini-jack cable.
2 Side Surround Out
Connects to the Surround input port of the 5.1 speakers with
the mini-jack cable.
3 Center/Subwoofer
Connects to the Center/Subwoofer input port of the 5.1
speakers with the mini-jack cable..
5.3.5 Connecting 6.1/7.1 Channel Speakers
1
2
3
6.1 Speakers
22
1
2
3
4
ASUS Xonar D1
Page 23
7.1 Speakers
No Item Description
1 Front Out
Connects to the Front input port of the 6.1/7.1 speakers with
the mini-jack cable.
2 Side Surround Out
Connects to the Surround input port of the 6.1/7.1 speakers
with the mini-jack cable.
3 Center/Subwoofer
Connects to the Center/Subwoofer input port of the 6.1/7.1
speakers with the mini-jack cable.
4 Back Surround Out
Connects to the Back Surround input port of the 6.1/7.1
speakers with the mini-jack cable.
1
2
3
4
ASUS Xonar D1
23
Page 24
5.4 Connecting Microphone
No Item Description
1 Microphone Input
Jack
Connect the microphone’s 3.5mm plug into this Mic-In jack
for voice communication, recording, or karaoke.
5.5 Connecting Line-In Audio Sources
1
No Item Description
1 Line Input Jack
Connect the 3.5mm plug of the CD/MP3 Player or any
other Line level analog audio sources into this Line-In jack
for sound recording or real-time Dolby sound processing
through the Monitoring path (See the “Mixer” section of the
driver guide).
24
1
ASUS Xonar D1
Page 25
6. Xonar D1 Driver Guide
6.1 Introduction to the Xonar D1 Audio Center GUI
1. After the driver installation is complete and your computer has been
rebooted, you will nd the Xonar D1 Audio Center’s icon in the system tray on
the bottom right-hand corner of the screen. Double click this icon to open the
Xonar Audio Center utility.
If the icon could not be found in the system tray, go to the Windows Control
Panel and double click the “Xonar D1 Audio Center” icon.
2. The Xonar D1 Audio Center is the Graphic User Interface (GUI) for the Xonar
D1 driver. You can control the functions and features of the Xonar D1 driver
on the Audio Center. The following picture shows a basic overview of the
Xonar D1 Audio Center. The following sections of this manual will describe its
functions in more detail.
1
3
2
8
5
6
7
ASUS Xonar D1
4
25
Page 26
No Item Description
1 Display Area
This display area shows the 10-band signal meter, volume
level, and the status of the Dolby technologies, EQ, and DSP
modes. Note: this area just displays information, but is not
used to alter settings.
2 Menu Open/Close
Clicking this button will move the display area and reveal
the conguration area below. Clicking it again will move the
display area back down.
3 Master Volume
This rotary knob controls the master playback volume. Drag
the small circle inside it to change the volume level.
4 SVN Button
Click this button to enable the “Smart Volume Normalization”
feature for constant volume from all playback sources. It will
display a blue light when enabled.
5 Mute Button
Click this button to mute audio playback; it will display a red
light when playback is muted.
6 DSP Mode
These 4 buttons give access to quick sound effects
combinations for Music, Games, DVD Video, and effect-free
(Hi-Fi) modes.
7 Setting Menu Panel
This panel gives access to setting tabs, including Main
Settings, Mixer/volume, Effects, Karaoke/MagicVoice, and
FlexBass. (see the following details)
8 Information icon
Clicking this icon will pop up driver’s Information window.
26
ASUS Xonar D1
Page 27
6.2 Main Setting
6.2.1 Sample Rate
The Sample rate determines the number of audio samples per second that the
Digital-to-Analog Converters (DAC) and S/PDIF digital interface will output. The
Xonar D1 audio card can support sample rates up to 192KHz (44.1K, 48K, 96K,
192KHz). Usually audio CDs and MP3 les are 44.1KHz; DVD-Video uses 48KHz;
DVD-Audio or other HD media may contain 96KHz or 192KHz high-denition
audio content. Please select the corresponding sample rate for your playback
sources to get the best audio delity. Even if your setting differs from the audio
source’s sample rate, the Xonar D1 engine will do super high delity sample-rateconversion with a double oating-point lter, which can reduce total harmonic
distortion (THD+N) by -140dB.
1
No Item Description
1 Sample Rate
Please select the sample rate that corresponds to (or
exceeds that of) your playback sources, for optimal audio
delity. The Xonar D1 audio card supports sample rates up to
192KHz (44.1K, 48K, 96K, 192KHz). Typical values:
-Audio CD, MP3, WMA, Wave les are 44.1KHz;
-The audio of DVD-Video is 48KHz;
-DVD-Audio or other HD media may contain 96KHz or
192KHz high-denition audio content.
ASUS Xonar D1
27
Page 28
6.2.2 Analog Out/Speaker Test
1 2 3
No Item Description
1 Analog Out
2 Speaker Test
3 Speaker Swap
The Analog Out setting is used to match your actual speaker
setting, such as headphones, 2 speakers (or 2.1), 4 speakers
(or 4.1), 5.1 speakers, 7.1 speakers, Front Panel Headphone
and Front Panel 2 speakers (or 2.1). Xonar D1 will play the
channels and do the proper 3D/Dolby sound processing
accordingly. Please select the correct speaker type for your
connected speakers.
Click this button to show the speaker test window in the right
pane. Click the “play” button to test each speaker one by one
or click each speaker manually to test.
(note: the Speaker Test function is not available on Windows
Vista due to a limitation in its audio stack.)
Clicking this button will pop up an advanced setting window
to allow you to:
–Swap center/bass outputs for 5.1/7.1-speaker set ups
-Swap Side/Surroud outputs for 7.1-speaker set ups
Check the box if your speakers are outputting the incorrect
channel. Otherwise, leave them blank.
28
ASUS Xonar D1
Page 29
6.2.3 SPDIF Out/DDL
Xonar D1 is capable of outputting Dolby Digital Live, which are real-time encoders
that transcode any audio, including games and music, into industry-standard Dolby
Digital bit-streams on-the-y. This is ideal for playback through a home theater
system, creating an immersive and impressive cinema surround sound experience.
It enables a single digital connection to carry high quality Dolby Digital surround
audio from your PC to digital speakers and AV Receivers.
3
2
1
No Item Description
1 S/PDIF Out enable/
disable
2 S/PDIF Output
Formats/Functions
3 Dobly Digital Live
advanced upmixing
option
Click this check box to enable S/PDIF output.
Note: Ensure that you enable S/PDIF output when using the
S/PDIF out header onboard.
This pull-down menu allows you to select one of the following
four formats:
-PCM (Pulse Code Modulation, which is a typical raw audio
data format.)
-Dolby Digital Live real-time 5.1ch encoding
This advanced setting will automatically upmix stereo (2ch)
content to 5.1 channel surround with Dolby Pro-Logic II when
using Dolby Digital Live output.
ASUS Xonar D1
29
Page 30
6.2.4 Audio Channels (For Vista only)
This setting only appears in Windows Vista. Vista will deliver the audio channels
to the audio driver according to this setting, no matter what the original audio
content is or how many channels they have. Therefore, you need to set this in
accordance with your audio content before you play it. Please note that this setting
is synchronized with Vista’s system speaker conguration and changing the
setting during playback will cease the audio playback program. You may have to
restart the program after the change. It’s recommended that you close all playing
programs before you change the setting.
1
No Item Description
1 Audio Channels
30
Here are some typical suggestions:
-MP3, WMA, AAC, CD, VCD, 2D games => 2 channels
-DVD-Video with Dolby Digtial or DTS 5.1 => 6 channels
-DVD-Video with Dolby Digtial EX or DTS ES => 8 channels
-3D games => 8 channels
ASUS Xonar D1
Page 31
6.2.5 7.1 Virtual Speaker Shifter
The 7.1 Virtual Speaker Shifter has the following major features:
• Expanding/upmixing audio to 7.1-channel surround sound
• Virtualizing 7.1 surround sound over any set of speakers
• Shiftable virtual speaker positioning allows you to adjust the best sound eld
easily without moving physical speakers and wires
2
1
No Item Description
1 Shifter enable/disable
Click this check box to enable the 7.1 Virtual Speaker Shifter.
Clicking the text bar will switch the right window to the
Speaker Shifter page for manual adjustments.
2 Drag speaker or
listener
You can drag each speaker or listener to a different relative
position “virtually” using only your mouse. The Xonar D1
audio card will process it and virtualize each speaker position
in real-time. The Subwoofer has no directional sounds, and
hence can be moved only closer or further away.
3 Reset
4 Increase/decrease
volume
5 Counter-clockwise
Reset all Speaker Shifter settings to the defaults.
Click + to increase volume (move speakers closer); click – to
decrease volume (move speakers further away)
Make all speakers (except Subwoofer) rotate counterclockwise
6 Clockwise
7 Manual Rotation
8 Manual Drag Mode
Make all speakers (except Subwoofer) rotate clockwise
Manually drag and rotate all speakers (except Subwoofer)
This is the default mode that allows you to manually drag
each speaker or the listener with your mouse.
3
6 8
4
5
7
ASUS Xonar D1
31
Page 32
6.2.6 Dolby Pro-Logic IIx
Dolby Pro-Logic IIx is a 7.1 surround upmixing technology and is widely used in
home theater systems, TVs, game consoles, and car audio systems. It can expand
stereo audio, such as MP3, CD, and TV programs into immersive 5.1 or 7.1channel surround.
1
No Item Description
1 Dolby Pro-Logic IIx
enable/disable
Click this check box to enable Dolby Pro-Logic IIx. Clicking
the text bar will switch the right window to the Pro-Logic IIx
page for manual adjustments.
2 Music Mode
Music mode is the default mode for regular music playback.
In this mode, you can adjust the Center Width and
Dimension parameters.
3 Center Width
This parameter is used to set the spread of the center, mainly
for the vocal signals of songs and music. Drag the scroll bar
to the left to centralize the vocal signal. Drag to the right side
to widen the vocal sound range.
4 Dimension
The dimension parameter fades sounds to the front or rear
of the listener.
5 Reset
6 Movie Mode
Reset all settings to the defaults.
Movie mode is a preset optimized for movie audio.
3
5
2
4
6
32
ASUS Xonar D1
Page 33
6.2.7 Dolby Headphone
Dolby Headphone creates a stunning multi-channel surround experience over
ordinary stereo headphones for playing 3D games, watching 5.1 DVD movies, and
listening to music. Dolby Headphone produces surround sound cues so realistic
that you will believe you are listening over speakers in a well-controlled studio.
Dolby Headphone can also improve listening comfort and reduce "listener fatigue"
from long listening over headphones.
4
3
2
1
No Item Description
1 Dolby Headphone
enable/disable
Click this check box to enable Dolby Headphone. Clicking
the text bar will switch the right window to Dolby Headphone
page for manual adjusting.
2 DH1
Dolby Headphone (DH) provides three room lters that may
be used with any type of audio. They differ in the sense of
the “spatial dimension” they impart.
DH1—Reference Room: Small, acoustically damped room.
3 DH2
4 DH3
DH2—Livelier Room: More acoustically live than DH1
DH3—Larger Room: Larger room than DH1; more distant
and diffused effect.
ASUS Xonar D1
33
Page 34
6.2.8 Dolby Virtual Speaker
Dolby Virtual Speaker technology simulates a 5.1-speaker surround sound
listening environment from as few as two speakers. Dolby Virtual Speaker also
creates a wider two-channel environment during playback of stereo CDs and MP3
content, and when combined with Dolby Pro Logic® II processing, delivers a virtual
5.1-channel surround listening experience from any high-quality stereo source.
2 3
1
No Item Description
1 Dolby Virtual Speaker
enable/disable
2 Reference Mode
Click this check box to enable Dolby Virtual Speaker. Clicking
the text bar will switch the right window to a Dolby Virtual
Speaker page for manual adjusting.
Dolby Virtual Speaker provides two modes of virtualization:
The rst is Reference mode, which virtualizes the missing
speakers as in the following picture.
3 Wide Mode
34
Wide mode virtualizes the necessary speakers and
enhances the surround experience as in the following
picture.
ASUS Xonar D1
Page 35
6.3 Mixer/Volume
The mixer page is designed to control the volume for playback and recording
on the Xonar D1. In addition, the Xonar D1 also provides a high-quality digital
monitoring function for hearing the recorded audio from the speakers. You can also
process the input signals with all playback sound effects such as Dolby technology.
6.3.1 Playback Volume
6
1
5
4
3
2
No Item Description
1 Playback Volume Tab
2 Source/Path Name
Click this button tto show the playback volume page.
This shows the source name for each volume control slider,
including:
- WAVE: All digital audio sources except MIDI les
- SW: Software Synthesizer; control the playback volume of
the MIDI les
- CD: CD-ROM playback (CD-DA) volume control
- LEFT, RIGHT…: the volume control for each speaker/
channel.
Note: Windows® Vista does not support WAVE, Synthesizer
and CD Player volume controls.
3 Mute/Unmute button
4 Volume Slider
Click this button to mute or unmute the audio channel.
Drag this slider down to decrease the volume; drag it up to
increase the volume. The tool-tip reveals the percentage
number from 1 to 100 in terms of the full scale level.
5 Left/Right Balance
The horizontal slider controls the volume between the left
and right channels.
6 Reset
Reset all volume controls to the default settings
ASUS Xonar D1
35
Page 36
6.3.2 Recording/Monitoring Volume
1
6
5
4
3
2
7
8
No Item Description
1 Recording Volume Tab
2 Source/Path Name
Click this button to show the recording volume page.
This shows the source name for each volume control slider,
including:
Mix: Stereo Mix which will record all analog inputs and digital
wave audio you are playing on PC
MIC: recording from MIC jack
Aux: recording from Aux-In for typically TV-tuner card audio
or other sound sources
Line-In: recording from Line-in jack for external audio devices
WAVE: recording from digital wave audio you are playing on
PC (Note: Windows Vista doesn’t support WAVE
recording.)
3 Monitoring button
Click this button to monitor and loopback recording audio
to outputs (PC speakers). Therefore, the recording volume
will inuence the monitoring signals from speaker outputs.
The audio will be mixed into the streams you are playing
out from your PC and all DSP effects will be applied to the
source, too. A typical benet is to apply Dolby Pro-Logic
IIx 7.1-ch spreading for your TV audio, CD, MP3, or stereo
game console audio from Wii, Xbox, PS2/PS3/PSP, etc.
To apply Dolby Virtual Speaker is suitable for two-speaker
environment.
9
36
ASUS Xonar D1
Page 37
4 Recording Selector
button
5 Recording Volume
Slider
6 Left/Right Balance
7 Reset
8 Microphone-In
Advanced Setting
Click this button to select the path/source you are going to
record. Please note that the recording function on Windows
is a one-path selector. So, you can select only one default
recording source at a time. You may have to restart the
recorder program if you switch to a different source. (Note:
On Vista, some application programs may allow you to
select the recording device/path in the recording programs
themselves.)
Drag this slider down to decrease the recording volume; drag
up to increase the recording volume. The tool-tip reveals the
percentage number from 1 to 100 in terms of the full scale
level.
This horizontal slider controls the volume between the left
and right channels.
Reset all volume controls to the default settings
Click this button to open the advanced settings for the
Microphone-In:
You can check with “Front Panel Microphone” to
enable microphone of front panel.
Enabling “Microphone Boost” will increase a volume
gain to boost microphone input signals. For typical
low-cost PC microphone, it’s recommended to enable
this function.
ASUS Xonar D1
37
Page 38
6.4 Effects
6.4.1 Environment Effects
Environment effects can be used to create realistic listening experiences that
mimic different environments. There are a total of 27 environment options, which
can be applied to all 2D sound sources, like music.
1
2
3
No Item Description
1 Default Environments
2 More Option
3 Environment Size
These four buttons activate Bathroom, Concert hall,
Underwater, and Music Pub environments, respectively.
Clicking this button will apply the environment effect that you
select from the pull-down menu on the right side. There are
another 23 options in this menu.
There are three size settings for each environment: Large,
Medium, and Small.
38
ASUS Xonar D1
Page 39
6.4.2 10-Band Equalizer
The equalizer can modify the audio output for different frequencies, and be used
to compensate for deciencies in your speakers/systems. There are 12 default
patterns and you can also make your own settings.
13
2 4
No Item Description
1 Default Equalizer
Options
2 User Dened
There are 12 available equalizer patterns. Click one to apply
it.
You can click this button to apply your own dened
parameters saved in the pull-down menu.
3 Equalier Slider
4 Save Name
5 Add/Save
Adjust the gain for each band (30~16KHz)
Key in a name for your own “User Dened” equalizer setting
Click this + button to save the parameters into User Dened
list
6 Delete
Click this - button to delete the parameters from User
Dened list
5 6
ASUS Xonar D1
39
Page 40
6.5 Karaoke/Magic Voice
The Xonar D1 provides powerful features for Karaoke, including Key-Shifting,
Vocal Cancellation and Microphone Echo. Microphone Echo can generate natural
echo effects on your singing voice just like a karaoke machine. Key-Shifting can
change the pitch of Karaoke background music, and Vocal Cancellation can
reduce the original vocal in songs and keep the music and symphony for karaoke.
5
1
2
3
4
No Item Description
1 On/Off
2 Key-Shifting
3 Vocal Cancellation
4 Mic Echo
5 Reset
The switch to turn on or off the functions on this page.
Check the box to enable or disable the key shifting feature
for music playback from 4 semitones below, to 4 semitones
above.
Checkbox to enable or disable the vocal cancellation function
and adjust the voice cancellation level from 0 to +100. +100
will eliminate most original vocals (default value is 50).
Select the Mic Echo function and adjust the gain for echo
signals (30~16KHz)
Reset all settings to the default.
40
ASUS Xonar D1
Page 41
6.6 FlexBass
FlexBass, an advanced bass management and enhancement mechanism, allows
you to select each satellite speaker’s type for optimal sound performance from the
speakers. (Small: common speaker that cannot produce low frequencies; Large:
wide-band speakers that can produce low frequencies well). It comes with an
adjustable crossover frequency for the boundary of the bass signals. FlexBass will
lter out the bass signals from small speaker channels and redirect them all to the
subwoofer or Large speakers.
4
1
2
3
No Item Description
1 On/Off
2 Small/Large speaker
option
3 Picture for Small/
Large speaker
The switch to turn on or off all functions on this FlexBass
page.
Select the speaker type that you connected. If your speaker
type cannot perform low-frequency signals (bass), please
select “Small” speaker type and Xonar D1 will lter out the
bass signals and send them to the subwoofer channel. If
those speakers are full-range, you can select the “Large”
speaker type.
Note: Common, cheap PC’s 2-channel speakers are
usually small-type speakers. Please refer to the speaker’s
specication. If you have any questions, please consult
your speaker vendor. However, common 2.1 speakers with
a subwoofer should be categorized as Large speakers
because the subwoofer can redirect the bass signals inside
the two channels to the subwoofer speaker automatically.
Colors for small/large speakers are different.
Orange: large speakers
Green: small speakers
ASUS Xonar D1
41
Page 42
4 LFE Crossover
Frequency
Adjusts the cut-off frequency (50~250Hz) for LFE (lowfrequency effects) signals. Xonar D1 will lter out the bass
signals below the crossover frequency from small speaker
channels and forward them to the subwoofer. The higher
the crossover frequency, the more bass signals will be
subtracted.
6.7 AEC (Acoustic Echo Cancellation)
Xonar D1 provides advanced Acoustic Echo Cancellation (AEC) for best voice
communication quality over your speakers. AEC technology can eliminate up-to40dB speaker echo return and suppress noises into your microphone for easier
conversation experience. AEC is an innovative feature to make Xonar D1 the
best sound card choice for online chatting in VOIP applications (Skype, MSN,
Google, QQ, etc.) or online gaming. AEC provides the following benets to you:
• Reduce the voice acoustic echoes like speakerphone devices when others talk
to you on line
• Minimize the playback sound echoes into your microphone during gaming or
music playback
• Effectively suppress background or system noises into your microphone
• 32-bit oating point algorithm providing precisely adaptive echo cancellation
performance up to 40dB
• Supports all VOIP applications and online games
To achieve the best performance of AEC function, the ideal system requirements
are as follows:
1. Speakers and microphone are low distortion (max. THD < 2%)
2. Flat frequency response between 300~4KHz
3. Use omni-direction electret microphone with >=40dB sensitivity
4. The microphone is more than 30cm far from PC’s speakers (x the distance)
and do NOT turn your speakers too loud
5. Put your microphone 20~30cm away from you (x the distance) and do NOT
speak too close or too loud into the microphone to avoid signal clipping and
distortion. Enable “microphone boost” on Xonar D1 audio center mixer to get
proper input signal level.
6. It’s suggested to disable original AEC function residing in some of the soft-
phones or voice communication programs to get best performance from
Xonar D1 audio card.
42
AEC function will be only suitable for bi-direction voice communication
applications. The speaker type will be set as 2 speakers and special voice
processing mode while AEC is applied (all audio effects will be suspended and
those controls on audio center will be frozen.). After you nish the voice-overIP applications, please remember to turn it off for normal high-delity audio
playback mode.
ASUS Xonar D1
Page 43
1
2
No Item Description
1 AEC
2 Enable AEC
Click AEC function page
Click the checkbox to enable AEC function. A alert message
will pop up:
This message implies the speaker conguration will be set to
2 speakers and all sound effect processors will suspended
except AEC function. Click “OK” to accept it; Click “Cancel”
if you want to enable it later. Check “Don’t remind me again”
will not show this message again.
6.8 Smart Volume Normalization
Smart Volume NormalizationTM (SVN) automatically keeps all music or video/TV
audio output at a constant level to reduce manual adjustment hassles inherent
with sound sources of different loudness. It allows you to listen to various content,
like MP3, TV program, DVD video and even games with consistent sound level.
The following graph shows how different signals 1 & 2 will become the same level
(for example, 10dB below full scale) after you turn on SVN. Please note that for
lower volume music 2, it will become louder when you turn on SVN; and for higher
volume music 1, it will become quieter.
ASUS Xonar D1
43
Page 44
0dB (Full-scale)
-
-10 dB
Music 1
Music 2
SVN Off
SVN On
T
2
3
1
No Item Description
1 SVN On/Off
Click this button to enable SVN. This button is outlined blue
when active.
2 SVN Display
When SVN is enabled, “Smart Volume” will be lit up at the
bottom of the volume meter and the volume meter will show
the level.
3 SVN Blue Light
44
When SVN is enabled, the master volume knob will be
illuminated by a blue light. It will be lit red if the volume is
muted.
ASUS Xonar D1
Page 45
6.9 DS3D GX and DSP Modes
Xonar D1 is introducing an innovative technology –DirectSound 3D Game
Extensions v1.0 (DS3D GX 1.0)- to restore DirectSound 3D Hardware acceleration
mode and its subsidiary EAX effects on Windows Vista for 3D games. Unlike some
proprietary API like OpenAL, DS3D GX doesn’t require games to support OpenAL
API. All existing games compatible with Microsoft DirectX and DirectSound 2D/3D
will be supported with DS3D GX technology. Before you start EAX and DS3D HW
games, please enable DS3D GX on the Xonar D1 audio center, and disable the
function after the games.
Supports latest DS3D GX 2.0 for gaming on Vista & XP
DS3D GX 2.0 not only revives EAX and DirectSound HW effects, but also
allows you to run EAX HD 5.0 games on both XP and Vista. It provides the best
compatibility with existing DirectX games. GX2.0 also adds innovative VocalFX
voice effects for existing EAX games or VOIP applications.
Besides the abundant sound effects described above, the Xonar D1 also provides
quick Digital Sound Processing modes which are congured for typical applications
including Music, Movies, and Games over different output speaker types. In
addition, Xonar D1 also offers a Hi-Fi mode for hi-delity playback without any
effect processing to keep the original audio delity. Every time you turn on Hi-Fi
mode, Xonar D1 will clear all sound effects. It’s also recommended to use Hi-Fi
mode for audio quality tests (using RMAA software or another machine-based
measurement). Use the DSP mode button as the quick setup if you don’t wish to
know the details of the effect setup. (Note: no sound effects will be applied to high-
denition 96KHz/192KHz content.)
4
ASUS Xonar D1
3
2
1
5
45
Page 46
No Item Description
1 GX Mode
DirectSound 3D Game Extensions mode to support EAX and
DirectSound 3D Hardware extensions for lots of DirectX/
DirectSound3D games on Windows Vista and XP.
2 Hi-Fi Mode
This mode is set for Hi-Fidelity playback, where all effects will
be cleared to keep the original digital data and analog output
quality as high as possible.
3 Music Mode
4 Movie Mode
5 Game Mode
This mode is set for Music playback.
This mode is set for DVD Movie playback.
This mode is set for Games.
6.10 VocalFX
VocalFX is an innovative voice processing technology to let your voice get into
the realistic game landscape (VoiceEX) or to emulate the background scenes in
online chat (ChatEX). It also allows you to change your voice pitch to disguise
who you are (Magic Voice). These features dramatically increase the fun for voice
communication on PC.
45
1
2
4
46
ASUS Xonar D1
3
Page 47
No Item Description
1 VoiceEX
2 Local VoiceEX
3 App List
4 ChatEX
5 Magic Voice
It produces realistic and dynamic environmental
reverberation for your voice in 3D gaming communication.
It produces realistic and dynamic environmental
reverberation for your voice in 3D gaming communication.
(You can hear your voice form speakers)
You can add VOIP application into VOIP application List.
It emulates different background environment effects when
you chat online.
Changes your voice pitch to different types for disguising
your real voice or just for fun in online chatting
For 3D Games
1. Check the check box of VoiceEX and Local VoiceEX.
2. Make sure you and your team member can talk each other in the game.
For VOIP
1. Press App List
2. If you don’t see the VOIP application of yours in the list, press Add.(Make
sure the Skype and MSN Messenger are the latest version)
ASUS Xonar D1
47
Page 48
3. Look for the application’s location and Open it.
4. Your VOIP application has been added into list.
48
ASUS Xonar D1
Page 49
5. Check the check box of ChatEX and Magic Voice.
6. You can use ChatEX and Magic Voice when you chat online.
Click the checkbox to enable VocalFX function, then a prompt message will pop
up:
This message implies the record device will be set to microphone. Make sure
the GX function is enabled. Click “OK” to accept it, or “Cancel” if you want to
enable it later. Check “Don’t remind me again” if you don’t want to see this
messsage pop up next time.
ASUS Xonar D1
49
Page 50
6.11 ASIO 2 Driver
ASIOTM (Audio Stream Input Output) is a proprietary audio driver architecture
and a trademark of Steinberg Media Technologies GmbH. The Xonar D1 driver
package has included an ASIO2 compatible driver for application programs that
have ASIO or ASIO2 output. ASIO can ensure lower latency during playback and
recording on PCs, which is very important for professional music creation and
editing. The Xonar D1 package also provides Ableton Live and Sonar LE audio
editing software, which all support ASIO output. The setup reference is described
below.
When Using Ableton Live…
2
3
4
1
5
50
ASUS Xonar D1
Page 51
No Item Description
1 Preferences
Step 1 is to open the “Preferences” window from the Options
tab.
2 Driver Type
Step 2 is to select “ASIO” as the driver type. (WDM and MME
are other Windows driver types)
3 Audio Device
Step 3 is to choose “ASUS Xonar D1 ASIO” as the Audio
Device.
4 Hardware Setup
Step 4 is to click the Hardware Setup to congure the Bit-
depth (16/24bit) and latency (1ms~300ms).
5 Sample Rate
Step 5 is to select the sample rate from 44.1, 48, 96,
192KHz.
When Using Sonar LE…
1
ASUS Xonar D1
51
Page 52
2
3
4
5
52
7
ASUS Xonar D1
Page 53
No Item Description
1 Audio Options
Step 1 is to open the “Audio Options” window from the
Options tab.
2 Driver Mode
Step 2 is to select “ASIO” as the driver mode in Advanced
tab. (WDM and MME are Windows driver types) The
changes will take effect after you restart the program next
time.
3 Playback Timing
Master
After step 2, Sonar LE will display 4 output drivers: “ASUS
Xonar D1 ASIO Out -00~06”. Make sure you are using 00 or
another one.
4 Recording Timing
Master
5 Sample Rate
After step 2, Sonar LE will display 1 input driver: “ASUS
Xonar D1 ASIO In -00”. Make sure you are using it.
Step 5 is to select the default le sample rate (44.1, 48, 96,
or 192KHz) for your Sonar project.
6 ASIO Panel
If you would like to congure bit-depth (16/24bit) and latency
(1ms~300ms) of the Xonar D1 ASIO driver, click this ASIO
panel to reset them. The changes will take effect the next
time you start the program.
For other applications that support ASIO, such as WaveLab, Cubase, Reason,
Winamp, etc, the setup will be very similar to the above.
ASUS Xonar D1
53
Page 54
7. RMAA Test Guide
The Xonar D1 driver CD includes RightMark Audio Analyzer (RMAA) v5.6, a
popular software intended for testing the quality of audio equipment, be it a sound
card, portable MP3 player, consumer CD/DVD player, or a speaker system. The
measurements are conducted by playing and recording test signals, and using
frequency analysis algorithms. The following provides a step-by-step loop-back
test guide for your Xonar D1 audio card.
7.1 Setting Up Xonar D1 Audio Card
Open the Xonar D1 Audio Center. Use the settings below:
1. Select the sample rate you will be using with RMAA (here we set 48KHz for
testing 48KHz/24bit signals).
2. Set analog output to 2-speaker mode (to get rid of any channel processing
over RMAA stereo signals in the driver)
3. Turn off all sound effects including Dolby, 7.1 speaker shifter, EQ,
Environment, etc. A quick way to do so is to enable the “Hi-Fi mode” button in
the Audio Center.
54
1
2
3
ASUS Xonar D1
Page 55
4. Go to the Mixer Recording page and select “Line In” as the recording source.
Click “Reset” to make sure the recording volume is on the default highest
level (0dB). This allows you to get realistic output and input quality ratings for
the Xonar D1 audio card.
4
You should use an external 3.5mm line cable as follows (as short as possible) to
connect the Front-Out jack to the Line-In jack for loop-back testing. In that case,
please select “Line In” as the recording source on the mixer page.
3.5mm Line Cable
ASUS Xonar D1
55
Page 56
5. Click “Reset” on the playback volume mixer page to keep the volume setting
on default.
6. Turn the master volume to the MAX level (0dB)
5
6
56
ASUS Xonar D1
Page 57
7.2 Conguration and Test with RMAA
Start RMAA and follow the setup procedure below.
1. Select both of the playback/recording devices as “ASUS Xonar D1 Audio”.
2. Select 24bit and 48KHz for the test signals. (If you change the format here,
please remember to go back to set the same sample rate output in the Xonar
D1 Audio Center)
1
2
3. Click “Test options” button in RMAA and check “Analyze noise and distortion
only in 20Hz-20KHz range” (audio in-band for human hearing) in the General
tab.
3
ASUS Xonar D1
57
Page 58
4. Go to the Sound Card tab and select “DirectSound” as the Driver Model
(because Windows MME mode doesn’t support high-resolution 24bit audio
playback and the data may be manipulated by Windows so that the real
hardware quality can not be measured properly.)
4
5. Click loop-back mode test button
58
5
ASUS Xonar D1
Page 59
6. Check if the levels shown in the Adjusting level window are OK (the level
meter will be green).
6
7. If the recording volume level is not high enough, please check and make
the WAVE and Master Volume have been at the maximum level; Instead, if
the recording volume level is too high, please lower the WAVE and Master
volumes gradually until the level is ok.
7
ASUS Xonar D1
59
Page 60
8. Begin the test by clicking the “Done” button. If you cannot get the level to be
“OK” after the previous step, click “Done” anyways and proceed.
8
9. Enter “ASUS Xonar D1 Audio” in the New slot name and select one Empty
slot. Then click “OK”.
60
9
ASUS Xonar D1
Page 61
10. RMAA will pop up the Test results window. You can click the “Select”
checkbox and click to “Make html report”.
10
11. Check and key in the report name/options as follows and then click “OK”.
11
ASUS Xonar D1
61
Page 62
7.3 RMAA Testing Results
Open the html le you created and saved in the test above, and it will display the
report with both data and plots in your browser. The following report is a sample
and you can see how high-delity and crystal-clean the Xonar D1 audio card is for
both output and input (one of the world’s nest sound cards, it has higher quality
than most CE devices.) You can also try testing the performance for other sample
rates and bit-depths with the same procedure.
62
ASUS Xonar D1
Page 63
8. RightMark Audio Analyzer test
Testing chain: External loopback (line-out - line-in)
Sampling mode: 24-bit, 48 kHz
Summary
Frequency response (from 40 Hz to 15 kHz), dB:
Noise level, dB (A):
Dynamic range, dB (A):
THD, %:
IMD + Noise, %:
Stereo crosstalk, dB:
IMD at 10 kHz, %:
General performance: Excellent
Frequency response
+0.01, -0.05
-112.7
112.6
0.0006
0.0009
-102.4
0.0010
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
Frequency range Response
From 20 Hz to 20 kHz, dB
From 40 Hz to 15 kHz, dB
-0.11, +0.01
-0.05, +0.01
ASUS Xonar D1
63
Page 64
Noise level
Parameter Left Right
RMS power, dB:
RMS power (A-weighted), dB:
Peak level, dB FS:
DC offset, %: -0.00 -0.00
-111.4 -112.0
-112.4 -113.0
-87.5 -88.4
Dynamic range
64
ASUS Xonar D1
Page 65
Parameter Left Right
Dynamic range, dB:
Dynamic range (A-weighted), dB:
+111.4 +111.8
+112.4 +112.8
DC offset, % -0.00 -0.00
THD + Noise (at -3 dB FS)
Parameter Left Right
THD, %:
THD + Noise, %:
THD + Noise (A-weighted), %:
0.0006
0.0006
0.0008 0.0008
0.0010
0.0009
ASUS Xonar D1
65
Page 66
Intermodulation distortion
Parameter Left Right
IMD + Noise, %:
IMD + Noise (A-weighted), %:
+0.0010 +0.0009
+0.0008 +0.0007
Stereo crosstalk
66
ASUS Xonar D1
Page 67
Parameter Left Right
Crosstalk at 100 Hz, dB:
Crosstalk at 1 KHz, dB
Crosstalk at 10 KHz, dB
-109 -107
-101 -101
-82 -82
IMD (swept tones)
Parameter Left Right
IMD + Noise at 5 KHz,
IMD + Noise at 10 KHz,
IMD + Noise at 15 KHz,
0.0011 0.0011
0.0009 0.0009
0.0009 0.0009
ASUS Xonar D1
67
Page 68
9. Troubleshooting and FAQs
[Troubleshooting]
The audio card driver could not be installed on my PC.
Instructions:
1. Please make sure that you have properly installed the audio card in the PCI
slot on your motherboard.
2. Check that the Windows hardware device manager has discovered a
multimedia audio device. If no device is found, please try scanning for new
hardware.
3. Please try soft reboot (restart) your Windows.
4. Remove the card, install it into another PCI slot, and try again.
I couldn’t nd the Xonar D1 Audio Center
Instructions:
1. Make sure you have installed the driver
2. Find the Xonar D1 Audio Center icon in the system tray on the bottom righthand corner of the screen. Double click the icon to open the Xonar D1 Audio
Center utility..
3. If the icon could not be found in the system tray, go to the Windows Control
Panel and double click the “Xonar D1 Audio Center” icon to make it visible in
the system tray again.
4. After the driver installation is complete, it’s recommended that you reboot
your computer to complete the setup. If the icon still doesn’t appear, please
try installing the driver package again.
I can’t hear any sound from my analog speakers
Instructions:
1. Please ensure that you have connected speakers properly and have powered
on your speakers
2. Please ensure that the device master volume or the software player has NOT
been muted on the Xonar D1 Audio Center
3. If you are using Dolby Digital Live encoder through the S/PDIF output, the
analog output will be muted to get rid of the interference between your digital
speaker system and analog speakers or headphones. Please check if this is
the case.
68
ASUS Xonar D1
Page 69
4. Please go to the sound and audio device of Windows Control Panel to check
if the playback default device is set to Xonar D1 Audio Device, instead of
other onboard AC97 or HDA codec device. If it’s not, please set it to Xonar
D1 Audio Device and restart your applications.
5. Please try restart your Windows.
I can’t hear audio input (Mic, Line-in, AUX, etc.) from my speakers
Instructions:
1. Please go to the mixer recording page in the Audio Center and select the
correct input as the recording source. If you are using Windows Vista, please
also go to system audio control panel to see the current default recording/
input device is right.
2. Please remember to turn on the digital monitoring button for that recording
source.
ASUS Xonar D1
69
Page 70
I can’t hear the TV tuner audio from my speakers
Instructions:
1. If you are using a traditional TV tuner card which has analog audio output,
please connect it to the Aux-In header on the audio card
2. Select Aux-In as the recording source and remember to turn on the digital
monitoring button on the recording mixer page
3. If you are using a TV tuner card which has digital audio output instead
of analog, please check that the sound is not muted and whether other
applications can play sound out. If you still have problem, please read the TV
tuner card’s software user guide.
I found no sound effects when playing 96K or 192KHz sound sources.
Instructions:
1. Currently Xonar D1 effects including Dolby support common 44.1K, 48KHz
sound sources processing and will assure high-denition audio (96K/192KHz)
in hi-delity playback.
2. If you still want to have the effects, you can use some editing software
(Ableton Live, Cakewalk, CoolEdit, Soundforge, etc.) to convert the sounds
into 48KHz les.
3. Please note that the frequency meter on Xonar D1 Audio Center panel will
not take effect either when the playback source is 96KHz or 192KHz sample
rate to prevent any processing distortion.
[FAQs]
Q1: Does the Xonar D1 support Windows Vista?
Answer:
Yes, the Xonar D1 driver package does support Windows Vista 32/64 bit and most
key features are available. In addition, Xonar D1 supports unique DS3D GX 1.0
on Windows Vista, which can recover DirectSound 3D hardware and EAX gaming
sound effects on Vista for a lot of existing DirectX games.
Q2: Why does the Xonar D1 support Dolby technology?
Answer:
Dolby is the ONLY brands and technology recognized by the CE industry and
available on a wide range of audio equipment. Xonar includes these features to
make your PC a powerful media and entertainment center.
70
ASUS Xonar D1
Page 71
Q3: Why is Xonar D1 the best audio card for HTPC and multi-channel
speakers?
Answer:
The Xonar D1 supports Dolby Digital Live, which allow a single digital connection
to your AV receiver to carry Dolby Digtial audio. In addition, Xonar D1 also provides
Dolby Pro-Logic IIx to upmix TV and other music to multi-channel surround
sound in Home Theater environments. Xonar D1 also has Ultra High Fidelity
SNR at 192K/24bit, which is the high quality consumer audio card in the world.
Therefore, it’s also the best card to deliver the high quality audio through an analog
connection to your home theater system or high-end multi-channel speakers.
Q4: Does the Xonar D1 support EAX on Vista?
Answer:
Yes, Xonar D1 can support EAX2.0 not only on Windows XP but also on Vista
through innovative DirectSound3D Game EXtensions v1.0 (DS3D GX 1.0)
technology.
Q5: Why do I need Dolby for PC games?
Answer:
1. Dolby Digital, Pro-Logic IIx, and DTS are available on the latest game
consoles, like XBOX360, PS3, and Wii. Dolby and DTS can provide the
best gaming sound experience and compatibility with home theater or TV
systems.
2. Dolby Headphone and Dolby Virtual Speaker are the best 3D sound
positioning, spatial modeling and 5.1-channel virtualization technology for
regular stereo headphones and speakers.
Q6: What’s the most important benet of the Xonar D1 for musicians?
Answer:
1. Ultimate Fidelity: Xonar D1 has the highest quality of audio in/out for the
cleanest sound production
2. Duplex HD: Supports audio sampling rates up to 24bit/192KHz for all inputs
and outputs
3. ASIO 2.0: Xonar D1 includes an ASIO 2.0 driver for low-latency, low-distortion
music creation application
4. Xonar D1 contains the Portable Music Processor Lite, to convert and process
regular music with Dolby Headphone, Dolby Virtual Speaker, and Smart
Volume Normalization effects.
ASUS Xonar D1
71
Page 72
Q7: Will PCM sound output through S/PDIF be just 2 channels even with
different analog output channels?
Answer:
The S/PDIF protocol specication (IEC-60958) can only carry 2-channel PCM
data or non-PCM AC3/DTS data. So, when a user selects PCM output for S/PDIF,
the Xonar sound card will always deliver 2 channel PCM data through the S/PDIF
output port. For attaining 5.1 channel surround sounds, you can select Dolby
Digital Live encoding output from the S/PDIF out menu, which will allow the Xonar
D1 to deliver 5.1 surround sound for games, DVD movies, and even stereo music.
Q8: Why is it that while playing audio CD, I cannot adjust volume from the
path: Mixer page > Playback > CD?
Answer:
If you are using the Microsoft® Windows Media Player to play audio les, you
have to change the playback setting of your CD optical drive to Analog. Open
the Windows Media Player and do the following to change the setting: Tools >
Options > Device > CD Properties > Playback > Analog.
72
ASUS Xonar D1
Loading...