Powering on your Eee PC
These are only quick instructions for using your Eee PC. Read the full
manual for detailed information.
1. Install the battery pack
3. Turn ON the Eee PC
When you open the display panel, do not force it down to the
table or else the hinges may break! Never lift the Eee PC by the
display panel!
2. Connect the AC power
adapter
Damage may occur if you
use a different adapter
to power the Eee PC. You
may damage both your
battery pack(s) and the
Eee PC with a faulty AC-DC
adapter.
Remember to fully charge the battery before first use and
whenever it is depleted to prolong battery life.
Status Indicators
Status indicators represent various hardware/software conditions.
Power Indicator
Battery Charge Indicator
Quick Use Guide - 2
Solid State disk (SSD)
Indicator
Wireless Indicator
Powering off your Eee PC
Do the following instructions to turn down your Eee PC.
A.
1. Click the red power switch in the Notification area.
Or, click
Shutdown.
2. Select
3. Select
Instant Shutdown from the Settings tab and select
Shut Down from the dialogue box.
OK to proceed.
1
2
3
B.
Or, press the power switch of the Eee PC directly, and follow the
previous instructions to shut down your Eee PC.
Quick Use Guide - 3
1