Astrotek Integration ASI805 User Manual

Hardware Overview /

Please Note /

Safety Instruction / Federal Communications Commission (FCC) Statement

2.

3. Quick Charge 3.0

1.

3. 2.4V

1.LED notifications

● Blue (blinks every 60 seconds): WISO device is connected to
smartphone.

● Red (blinks twice every 7 seconds): WISO device is disconnected
from smartphone.

● Red (Steady 10 seconds): SOS alert is activated.

● Red (blinks every 10 seconds): WISO device is using it’s internal
power

2. Panic button

3. USB charging port.

● Press panic button for 2 seconds in order to activate SOS alerts.

● When the automatic SOS alert is triggerred (by the G sensor
set), you will hear a buzzing sound. To deactivate the SOS alert,
you may push the button. The buzz will last 30 seconds before a
SOS alert is sent.

● WISO app must be installed on smartphone and connected to
PanicSaf Car Charger in order to activate SOS alert.

● The device uses Bluetooth 4.0 technology (range 5-6 meters).

● You must have internet connection to make SOS alert work.

● You must enable location services to have the location sent via
SOS alert.

● SMS notifications are disabled when roaming internationally.

● DO NOT close WISO APP on your smartphone, otherwise SOS
alert will not be activated.

● You must re-launch WISO APP after you turn off or re-start your
smartphone.

● SOS call is only available for Android device. It is not available
on iOS devices due to its native restrictions.

● WISO location service will ONLY be displayed on Google Map.

● You shall use PanicSaf Car Charger in the way it is intended.
You should not use it in a way that would be illegal.

● PanicSaf Car Charger may have additional functionality, such as
transmission and recordation of audible or GPS signal or other
identification information. If you have privacy concerns about
these features, make sure you follow the instructions to disable
them.

● NOT waterproof. Keep away from heat, direct sunlight and
extreme heat.

● Do not short circuit the output terminals.

● Do not operate the device at temp above 65°C/149°F

● Do not use the charger with appliance requiring more than 24V.

● Please understand that heat is an inherent result of the
charging process, so it is natural for the device to reach up to
60°C or 140°F at room temp.

● Remove from car cigarette lighter socket when not in use.

● Do start car engine first then plug in the device.

● Do NOT shake the device while it is plugged into car socket to
avoid damage to product.

15.21
You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void
the user’s authority to operate the equipment.

15.105(b)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for
help.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1) this device may not cause interference and

2) this device must accept any interference, including
interference that may cause undesired operation of the device.

PanicSaf car charger

Quick Guide

Settings on APP /

● Step 1 :
In order to activate the panic button feature of this device, please

search “WISO safety “ or scan the QR code to download
from Apple App Store or Google Play, to your smartphone.

● Step 2 :
Start your car, and then plug Safety PLUS car charger in your

cigarette lighter socket of the car.

● Step 3 :
Start the login-in of WISO APP and complete the following setting

process.

1. Settings: Device Paring

● Click the “Add” icon to start device pairing
with your phone.

2. Settings: Pairing

● Once paired, the APP will notify the device
is connected, then click NEXT.

4. Settings: email

●Add up to 3 contacts to whom you want to
send emergency Email and swipe right.

5. Settings: call

● Add 1 contact to whom you want to call
out and then click the check button in the
up right corner to save all the settings.
(Android user ONLY.)

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
End users must follow the specific operating instructions for
satisfying RF exposure compliance. This transmitter must not
be co-located or operating in conjunction with any other
antenna or transmitter.

7. Review all your settings

● Review all your settings.

8. Firmware Update

● Once connected, WISO APP will
automatically update firmware if the
firmware is not the latest version. Follow
the instruction on the screen until the
update has been completed.

10. Profile Settings

● Setup SMS Recipient Country; Turn on
Safety Notification, Audio Recording and
G Sensor Force if desired.

11. Extended SMS service

● Once your account is active, you will
receive 10 free SMS. After that, you can
have up to 6 free SMS every month. Refill
when needed.

3. Settings: SMS

● Add up to 3 contacts to whom you want to
send emergency SMS and swipe right.

6. Done!

● You are done and click here to see your
setting info.

9. Your Profile

● Back to main screen and check more
profile settings here.

12. Select SMS recharge plan

● Select your plan and follow the pay steps

in App Store or Google Play.