Astro Pneumatic 9517 User Manual
Model:
Product Type:
9517
WARNING
Study, understand and follow all instructions provided with this
product. Read these instructions carefully before installing,
operating, servicing or repairing this tool. Keep these instructions
in a safe accessible place.
INTENDED USE OF THE TOOL
The tool is intended to be used with a metal working hammer like
a ball-peen to drive and loosen fasteners. Do not use a nailing
hammer which is made from a harder material more likely to chip.
Do not use this tool outside of the designed intent. Never modify
the tool for any other purpose or use.
WARNING
• Normal use of this product is likely to expose the user to
dust and/or microscopic particles containing chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Always wear
appropriate safety equipment and clothing when using this
product. Study, understand and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in damages
and serious injury or death.
• Always wear ANSI approved goggles when using this
product. (Users and Bystanders).
• Never use this tool for any application other than for
which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with accessories
not designed for it could result in serious injury or death.
• Always select the correct accessories of the correct size
and design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle is in
secure position, and will not move during repair.
16 PIECE HAND IMPACT DRIVER SET
MADE IN CHINA
16 PIECE HAND IMPACT DRIVER SET
www.astrotools.com
1 YEAR LIMITED WARRANTY
• Astro Pneumatic Tool Co. warrants our products to the original user against defective
material or workmanship for a period of 1 year (except where noted on our price
schedule) from the date of 1st use. Astro reserves the right to determine whether the
product failed because of defective material, workmanship or other causes and to charge
back for missing parts. Astro Pneumatic Tool Co., at its discretion, will repair products
covered under this warranty free of charge. The distributor should direct the original user
to return the product (with the exceptions listed below) with the distributor’s name,
address, adequate proof of date of purchase or a copy of warranty card, and a short note
explaining the problem. Failures caused by accident, alteration, or misuse are not
covered by this warranty.
• If one part of this product fails, please do not return the entire product. Astro will
replace free of charge component parts of this product that fail within 1 year of first
use by the original user. Items included in this category include but are not limited
to kits, hand tool kits and any other product where there are multiple items or
components that make up the unit. Please contact the phone number below in
order to obtain the replacement components covered under warranty.
• Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and may
not be transferred to subsequent owners.
• This warranty is in lieu of all other warranties, expressed or implied, including warranties
of merchantability and fitness for a particular purpose. Some states do not allow the
exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you.
PLEASE DO N OT RETURN ANY PROD UCT WITHOUT CALL ING
When unpacking, check the parts diagram and part number
listing on page 2 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
PRODUCT INFORMATION:
• High grade alloy body transfers impacts from hammer blows into
rotational force, breaking free rusted or otherwise frozen bolts
and screws
• Includes fourteen 5/16" hex bits in flathead, Philips and hex
sizes, or use the ½" drive with your own impact sockets
• Perfect for brake disc retention screws and other fasteners
exposed to the elements
• Set included :
Flathead: #5, #6, #8, #9
Hex: 4mm, 5mm, 6mm, 8mm
Phillips: #1, #2, #3, #4
3" Long Phillips: #2, #3
1/2" SQ. to 5/16" Hex Adapter
Impact Driver
DO NOT DISCARD – GIVE TO USER
Page 1
1-800-221-9705 FOR INSTRUCTIONS
Unpacking
372 Old US Hig hway 52 South
Mount Airy, NC 27030
PARTS BREAKDOWN
Model:
Product Type:
16 PIECE
9517
Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
HAND IMPACT DRIVER SET
1 2 3 4
13
15 16
Index Part No. Description Qty
1
2
3
4
5
6
7
8
9517-01
9517-02
9517-03
9517-04
9517-05
9517-06
9517-07
9517-08
SL5 Flathead
SL6 Flathead
SL8 Flathead
SL9 Flathead
PH1 Phillips
PH2 Phillips
PH3 Phillips
PH4 Phillips
5 6
7 8 9 10 11 12
14
Parts List
Index Part No. Description Qty
1
9
1
10
1
11
12
1
13
1
1
14
1
15
1
16
H4 Hex 4mm
9517-09
H5 Hex 5mm
9517-10
H6 Hex 6mm
9517-11
H8 Hex 8mm
9517-
12
1/2" SQ. to 5/16" Hex Adapter
9517-
13
Impact Driver
9517-
14
3" Long #2 Phillips
9517-15
3" Long #3 Phillips
9517-16
1
1
1
1
1
1
1
1
Page 2
Loading...