Astro Pneumatic 55670 Assembly And Operation Instructions Manual
Product Type:Model:
55670
WARNING
Study, understand and follow all instructions provided
with this product. Read these instructions carefully
before installing, operating, servicing or repairing this
tool. Keep these instructions in a safe accessible place.
INTENDED USE OF THE TOOL
The workbench is the ultimate 7-IN-1 WORKBENCH,
sawhorse, scaffold, platform, car creeper, dolly and
hand truck. The item can be transformed easily between
different modes by following the instruction manual. This
product is intended for DIY and light trade use. Do not
use this tool outside of the designed intent. Never modify
the tool for any other purpose or use.
WARNING
Caution: To help prevent personal injury
• Normal use of this product is likely to expose the
user to dust and/or microscopic particles
containing chemicals known to the State of
California to cause cancer, birth defects or other
reproductive harm. Always wear appropriate safety
equipment and clothing when using this product.
Study, understand and follow all instructions
provided with this product. Failure to read and
follow all warnings and operating instructions may
result in damages and serious injury or death.
• Always wear ANSI approved goggles when using
this product. (Users and By standers).
• Never use this tool for any application other than
for which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with
accessories not designed for it could result in
serious injury or death.
• Always select the correct accessories of the correct
size and design for the job that you are attempting
to perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle
is in secure position, and will not move during
repair.
7-IN-1 WORKBENCH
www.astrotools.com
1 YEAR LIMITED WARRANTY
• Astro Pneumatic Tool Co. warrants our products to the
original user against defective material or workmanship
for a period of 1 year (except where noted on our price
schedule) from the date of 1st use. Astro reserves the
right to determine whether the product failed because of
defective material, workmanship or other causes and to
charge back for missing parts. Astro Pneumatic Tool
Co., at its discretion, will repair products covered under
this warranty free of charge. The distributor should
direct the original user to return the product (with the
exceptions listed below) with the distributor’s name,
address, adequate proof of date of purchase or a copy
of warranty card, and a short note explaining the
problem. Failures caused by accident, alteration, or
misuse are not covered by this warranty.
• Astro Pneumatic Tool Co. or its authorized service
representatives must perform all warranty repairs. Any
repair to the product by unauthorized service representatives voids this warranty. The rights under this
warranty are limited to the original user and may not be
transferred to subsequent owners.
• This warranty is in lieu of all other warranties, expressed
or implied, including warranties of merchantability and
fitness for a particular purpose. Some states do not
allow the exclusion of limitations of incidental or consequential damages so the above limitations may not
apply to you.
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9705 FOR INSTRUCTIONS
PRODUCT INFORMATION
• 7 different functions including: workbench, saw horse,
scaffold, platform, car creeper, dolly and hand truck
• 550lb max capacity in scaffold and platform mode
and 330lb max in other modes
• Includes integrated power strip for standard power
cords and USB devices
• 4 hide-away caster wheels deploy for car creeper,
dolly and hand truck modes
• 43" x 21.75" work surface, 20.5" to 30.75" working height
• Design features an extending tool tray, hanging hook,
push bar. 2 vice pegs, 2 quick clamp connection ports
and extendable locking legs
DO NOT DISCARD – GIVE TO USER
Page 1
Product Type:Model:
Towing Hole
55670
Tool Tray
Universal Wheels
w/ Brakes
Self Adjusting Leg Pads
7-IN-1 WORKBENCH
PRODUCT LAYOUT
Sawhorse Holes
Compass
2-IN-1 Handle
Fixed Wheels
Ruler
Aluminum Legs
TECHNICAL SPECIFICATIONS
Work Platform Size: 109 x 55cm (3'6.9" x 1'9.7")
Work Height: 56/80cm (1'10"/2'7.5")
Loading Capacity:
Workbench/Sawhorse Mode: 150kgs (330lbs)
Scaffold/Platform Mode: 250kgs (550lbs)
Net Weight: 14kgs / 30.9lbs
Car Creeper & Dolly Mode: 150kgs (330lbs)
Hand Truck Mode: 150kgs (330lbs)
WARNING
Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure
to follow the safety rules and other basic safety precautions may result in serious personal injury.
This machine is designed for certain applications only. The distributor cannot be responsible for issues
arising from modification. We strongly recommend this machine not be modified and/or used for any
application other than that for which it was designed. If you have any questions relative to a particular
application, DO NOT use the machine until you have first contacted the distributor to determine if it can or
should be performed on the product.
WARNING: Read and understand all instructions.
Failure to follow all instructions listed below may result in serious injury.
CAUTION: Do not allow persons to operate or assemble this workbench until they have
read this manual and have developed a thorough understanding of how the unit works.
WARNING: The warnings, cautions and instructions discussed in this instruction manual
cannot cover all possible conditions or situations that could occur. It must be understood
by the operator that common sense and caution are factors which cannot be built into
this product, but must be applied by the operator.
Maintain your workbench. It is recommended that the general condition of any workbench be examined
before it is used. Keep your workbench in good repair by adopting a program of conscientious repair and
maintenance. Have necessary repairs made by qualified service personnel. Wipe away dirt and dust from
the workbench on a regular basis.
Page 2
Loading...