Astro Pneumatic 200SLMAX User Manual

Model:

200SLMAX

WARNING

Study, understand and follow all instructions provided with
this product. Read these instructions carefully before
installing, operating, servicing or repairing this tool. Keep
these instructions in a safe accessible place.

DO NOT LOOK DIRECTLY INTO LIGHT SOURCE.

Product Type:

SUNLIGHT 2000 LUMEN RECHARGEABLE CORDLESS
PROFESSIONAL COLOR MATCH FLOOD LIGHT

www.astrotools.com

INTENDED USE OF THE TOOL

The 200SLMAX color match light is designed to be used
as a flood light for collision repair, detailing, paint correction
and paint booth use. Do not use this tool outside of the
designed intent. Never modify the tool for any other
purpose or use.

WARNING

Caution: To help prevent personal injury
avoid looking directly at light.

• Use of this product can expose you to chemicals including
ethylene glycol, gasoline vapors and engine exhaust, which
are known to the State of California to cause cancer, birth

defects, or reproductive harm. For more information, visit

www.P65Warnings.ca.gov. Always wear ANSI approved
safety equipment, safety glasses and clothing when using
this product. Study, understand, and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in damages

and serious injury or death.

• Always wear ANSI approved goggles when using this

product. (Users and Bystanders).

• Never use this tool for any application other than for

which it was designed.

• Only use accessories designed for this tool.

• Never alter or modify this tool in any way.

• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with accessories

not designed for it could result in serious injury or death.

• Always select the correct accessories of the correct size

and design for the job that you are attempting to perform.

• Always work in a clean, safe, well-lit, organized and

adequately equipped area.

• Do not begin repairs without assurance that vehicle is in
secure position, and will not move during repair.

1 YEAR LIMITED WARRANTY

• Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year (except where noted on
our price schedule) from the date of 1st use. Astro reserves the right to determine
whether the product failed because of defective material, workmanship or other
causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its
discretion, will repair products covered under this warranty free of charge. The
distributor should direct the original user to return the product (with the exceptions
listed below) with the distributor’s name, address, adequate proof of date of
purchase or a copy of warranty card, and a short note explaining the problem.

Failures caused by accident, alteration, or misuse are not covered by this
warranty.

• Astro Pneumatic Tool Co. or its authorized service representatives must perform
all warranty repairs. Any repair to the product by unauthorized service representa­tives voids this warranty. The rights under this warranty are limited to the original
user and may not be transferred to subsequent owners.

• This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so
the above limitations may not apply to you.

PLEASE DO NOT RETURN ANY PRO DUCT WITHOUT CALLING

1-800-221-9705 FOR INSTRUCTIONS

Before Use

Before use, check the parts diagram and part number listing
on page 2 to make sure all parts are included. If any parts are
missing or damaged, please call your distributor.

PRODUCT INFORMATION:

• Replicates the light quality of the Sun, achieving a high CRI

of 96 - guaranteeing an accurate representation of surface
colors and imperfections

• 2000 lumens of warm-white light operating at the 4000K
color temperature range popular among painters and
detailers

• Solid aluminum construction with rubber over-mold
protection, IP65 water proof

SUNLIGHT 2000 LUMEN RECHARGEABLE CORDLESS
PROFESSIONAL COLOR MATCH FLOOD LIGHT

MADE IN CHINA

Page 1

SPECIFICATIONS:

Color Temperature :
Water Proof :
Light Output :
Battery Life :
Charge time :
Li-ion Rechargeable :

4000K
IP65
700 - 2000 Lumens
2 - 6hrs

3.5-4hrs

11.1V/4400 mAh

DO NOT DISCARD – GIVE TO USER

Model:

200SLMAX

1) Avoid looking directly into the beam, as it can be blinding.

2) Don't use the lamp near open flames.

3) Do not disassemble.

4) Lamp gets hot after long use! Cool down the lamp
before touching.

5) If lamp is stored for one month or more, fully charge it
prior to storage.

6) Don't leave battery flat for excessive periods of time.
Leaving the battery discharged can make recharging
difficult.

7) The battery cannot be replaced.

8) The battery must be removed from the appliance before
it is scrapped.

9) The appliance must be disconnected from the charger
when removing the battery.

10) The battery should be disposed of safely.

NOTE

Before disposing of damaged goods, check with your
state Environmental Protection Agency to find out about
special restrictions on the disposal of the lamp and
batteries or return them to a certified service center for
recycling.

Product Type:

SUNLIGHT 2000 LUMEN RECHARGEABLE CORDLESS
PROFESSIONAL COLOR MATCH FLOOD LIGHT

USING INSTRUCTIONS

The ON/OFF switch is located on the back of the lamp :

• Press switch once: low brightness

• Press switch a second time: full brightness

• Press switch a third time: off

CHARGING PROCESS

• Never attempt to open for any reason.

• Do not store in locations where the temperature may

exceed 40 °C.

• Charge only at ambient temperatures between 4 °C and

40 °C.

• Charge only using the charger provided with the tool.

• Do not cause short circuits. If connection is made between

the positive (+) and negative (-) terminal directly or via
accidental contact with metallic objects, the battery is short
circuited and an intense current will flow causing heat
generation which may lead to casing rupture or fire.

• Do not heat. If batteries are heated to above 100 °C,

sealing and insulating separators and other polymer
components may be damaged resulting in electrolyte
leakage and/or internal short circuiting leading to heat
generation causing rupture or file. Moreover do not dispose
of the batteries in fire, explosion and/or intense burning
may result.

PARTS BREAKDOWN

Front

RUBBER PROTECTIVE EDGE
200SLMAX-03

Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.

HIGH CRI COB LED

ON/OFF SWITCH

FOLDING BASE BRACKET
200SLMAX-01

Back

HANDLE BRACKET
200SLMAX-02

ADJUSTABLE
ANGLE BASE

CHARGER
200SLMAX-CH

Page 2

810