Astro 4577 User Manual

4577

Mobile Masking Machine

• Lightweight, easy to use and portable

• Dispenses rolls up to 18" in width

• Sharp, anodized blade for smooth cutting

• Unit can be used as a step stool

• Weight: 13lbs. (6kg)

www.astrotools.com

1 YEAR LIMITED WARRANTY

•Astro Pneumatic Tool Co. warrants our products to the original user against defective material or workmanship for a period of 1 year (except where noted on our price schedule) from the date of 1st use. Astro reserves the right to determine whether the product failed because of defective material, workmanship or other causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its discretion, will repair products covered under this warranty free of charge. The distributor should direct the original user to return the product (with the exceptions listed below) with the distributor’s name, address, adequate proof of date of purchase or a copy of warranty card, and a short note explaining the problem.

Failures caused by accident, alteration, or misuse are not covered by this warranty.

•Astro Pneumatic Tool Co. or its authorized service representatives must perform all warranty repairs. Any repair to the product by unauthorized service representatives voids this warranty. The rights under this warranty are limited to the original user and may not be transferred to subsequent owners.

•This warranty is in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose. Some states do not allow the exclusion of limitations of incidental or consequential damages so the above limitations may not apply to you. All claims must be sent to:

Astro Pneumatic Tool Company 372 Old US Highway 52 South Mt. Airy, NC 27030

PLEASE CALL 1-800-221- 9705

FOR REPAIR AND RETURN INSTRUCTIONS

Unpacking

When unpacking, check the parts diagram and part number listing on page 2 to make sure all parts are included. If any parts are missing or damage, please call your distributor.

WARNING

Weight Capacity: 200 lbs. (100kg)

Do Not Exceed!

Assembly Insructions:

1. Using the provided bolts, nuts, and washer sets to set up the frames (#4457-02) and the conncetion bar (#4577-03).

2. Attach the paper roller assembly (#4577-04) to the frames with bolts provided.

3. Attach the cutting blade (#4577-05) and the springs to the frames with bolts, nuts, and washer sets provided.

4. Attach the tape wheel assembly (#4577-06) to the frames with bolts, nuts, and washer sets provided.

5. Attach #1 seat board on top of the frames with bolts nuts, and washer sets provided.

Mobile Masking Machine

4577

Mobile Masking Machine

4577-01 4577-01A 4577-01B 4577-01C 4577-02 4577-03 4577-04 4577-04A 4577-04B 4577-04C

Seat Board M6 x 40 Bolt M6 Nut 6 x 12 Washer Frame Connection Bar Paper Roller Assembly Paper Roller Fixer 20 Washer Spring

8 10 10

Page 2

4577-04D 4577-04E 4577-04F 4577-05 4577-06 4577-06A 4577-06B 4577-06C 4577-06D

M10 x 40 Bolt M10 Knob Spring Cutting Blade and Spring Tape Wheel Assembly M6 x 120 Bolt Wing Nut Tape Wheel Hub 06 x 17 Washer

1 1 2 1 2 2 4 2 4