Astro 4320 User Manual

4320

AIR NEEDLE SCALER

www.astrotools.com

Astro Pneumatic Tool Co. warrants our products to the original user against defective material or workmanship for a period of 1 year from the date of 1st use. Astro reserves the right to determine whether the product failed because of defective material, workmanship or other causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its discretion, will repair products covered under this warranty free of charge. The original user is to return the product (with the exceptions listed below) with the distributor’s name, address, adequate proof of date of purchase or a copy of warranty card, and a short note explaining the problem. Failures caused by

accident, alteration, or misuse are not covered by this warranty.

Astro Pneumatic Tool Co. or its authorized service representatives must per form all warrant y repairs. Any repair to the product by unauthorized service representatives voids this warranty. The rights under this warranty are limited to the original user and may not be transferred to subsequent owners.

This warranty is in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose. Some states do not allow the exclusion of limitations of incidental or consequential damages so the above limitations may not apply to you. All claims must be sent to:

Astro Pneumatic Tool Company P.O. Box 251935 Los Angeles, CA 90025

PLEASE DO NOT RETURN ANY PRODUCT TO THE P.O. BOX.

CALL 1-800-221-9705 FOR INSTRUCTIONS.

Product Information

• Ideal for scaling and rust removal

• Includes needle scaler attachment with 19 high tension steel needles

• Comes complete with flux chisel

SPECIFICATIONS:

Needles: Stroke Speed: Net Weight: Length: Air Consumption: Air InIet: Hose Size: Sound Pressure: Vibration:

3x12 7" 4200bpm

1.08/1.14kg 255/313mm

0.12m³/min 1/4" 8mm 91dBA

14.5m/S²

Important

Unpacking

When unpacking, check the parts diagram and part number listing on page 2 to make sure all parts are included. If any parts are missing or damaged, please call your distributor.

AIR NEEDLE SCALER

4320

AIR NEEDLE SCALER

4320-01 4320-02 4320-03 4320-04 4320-05 4320-06 4320-07 4320-08 4320-09 4320-10

Back Head Valve Stem Valve Seat Spring Throttle Cap Lever Spring Pin O-Ring, Head & Cylinder Rubber Cushion Valve Cap

1 1 1 1 1 1 1 1 1 1

4320-11 4320-12 4320-13 4320-14 4320-15 4320-16 4320-17 4320-18 4320-19

Piston (20x17x47) Cylinder Chisel Bush O-Ring, Unit & Cylinder Needle Driver Needle (3x180L) Needle Holder Needle Holder Spring Needle Tube (110L)

1 1 1 1 1

1 1 1