ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1.
Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Parts:
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Decorative Leaf (M)
Wire Nut (D)
Hex Nut (E)
Washer (F)
Nipple(G)
Top Loop (H)
Canopy (I)
Collar (J)
Loop Lock (K)
Chain (L)
Outlet Box
House Grounding Wire
Fixture Grounding Wire
Wire Nut (D)
Fixture Wire
Hex Nut (E)
Washer (F)
Mounting Strap (A)
Mounting Screw (B)
Green Grounding Screw (C)
Nipple(G)
Top Loop (H)
Canopy (I)
Decorative Leaf (M)
Collar (J)
Loop Lock (K)
Chain (L)
Decorative Leaf-1 (N)(X2)
Ball Nut (R) (X2)
Hex Nut (O)
Nipple-1(P)
Cap (Q)
Finial(R)
1. Attach the nipple to the mounting
strap, then secure it with a washer
and hex nut.
2. Attach the mounting strap to the
outlet box by using two mounting
screws.
3. Attach the rod and decorative leaf-1 onto stem
of main fixture, thread the loop onto stem of main fixture as
shown.
Note: The decorative leaves must be staggered.
4. Secure the top loop to the nipple.
5. Choose the length of the chain you need, then weave the
fixture wire and the fixture grounding wire through the chain,
collar, decorative leaf and canopy.
Loop Lock (K)
Loop
Rod
Decorative Leaf-1
Stem
Coupling
Hex Nut (O)
Nipple-1 (P)
Cap (Q)
Decorative Leaf-1 (N)
Finial (R)
Bulb Type B Max.60W
(not included)
Candle Tube
Socket
Main Fixture
6. Connect one end of the chain with the loop by using a loop lock.
7. Connect the other end of the chain with the top loop by using another loop lock.
8. Thread the fixture wire and fixture grounding wire through the top loop, nipple and mounting strap.
9. Pull out the outlet wires and house grounding wire from the outlet box. Make wire connections using
the wire nuts:
---The smooth wire (marked) from the fixture to the black wire from the power source.
---The ridged wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then
connect it to the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
10. Attach the canopy and decorative leaves to the mounting strap by inserting the top loop, then
secure them with the collar.
Note: The decorative leaves must be staggered.
11. Attach the candle tube into the socket on the main fixture body.
12. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed
wattage.
13. Screw the nipple-1 into the coupling on main fixture. Secure it with hex nut. Slide the cap and
decorative leaves-1 onto the nipple-1, thread the finial onto the nipple-1.
Note: The decorative leaves must be staggered.
14. Turn on the power at the main fuse or circuit breaker box.
A
B
A: 33-1/2"
B: 23-1/4"
Loading...