Page 1
Assembly and Installation Instruction
Warning!!! Shut Power Off At Fuse or Circuit Breaker .
1. Carefully unpack your new fixture and lay out all the parts
on clear area. Take care not to loose any small parts
necessary for installation.
2.For this Model
3.Attach two Mounting Screws to Mounting bracket and
securing mounting bracket to Outlet box..
4.Thread the slip washer, knurl nut, threaded rod into the
Mounting bracket, and screw the threaded rod onto the
Ceiling canopy..
5.Connect the White Fixtur e Wi re to the White Supply Wire,
Connect the Black Fixture Wire to the Black Supply Wire.
Make
sure all Wire Connectors are secure and do not easily pull off
with the slight tug. Connect Ground Wire from the Outlet Box
and Fixture Ground Wire to the Mounting Bracket with the
Green Grounding Screw provided.
6.After the wires connected , raise Canopy against ceil ing and
tighten with Loop.
7.Connect the chain to the ceiling canopy and the fixture
canopy..
8.Screw the socket assembly into the center rod.
9.Screw the threaded rod into the socket assembly.
10.Place the square metal washer ,shade over the end of the
threaded rod and tighten with the rubber washer and finial
securing the shade in place by using Hand Tool.
11.Attach the fixture arms to the fixture canopy and to the
hooks inside the shade.
12.Insert Bulb to Socket. Return the power to the Outlet Box
and test the fixture. Your installation is now complete.
Loading...