AST AST45PT Datasheet

TM
Pressure & Temperature Submersible Transmitter
AST45PT
The AST45PT is a combined pressure and temperature transmitter for
accurate liquid level measurement.
For pressure ranges from 0-1 to 100 PSI that require a wide range of
media compatibility, the AST45PT submersible series is an excellent solution
to monitor level and temperature for indoor and outdoor applications.
PRESSURE & TEMPERATURE
Environmental Data
Temperature
Operating -40 to 85°C (-40 to 185°F)
Storage -40 to 100°C (-40 to 212°F)
Compensated Range 0 to 55°C (32 to 131°F)
TC Zero <±1.5% of FS
TC Span <±1.5% of FS
Other
Shock 100G, 11 msec, 1/2 sine
Vibration 10G peak, 20 to 2000 Hz.
EMI/RFI Protection: Yes
Rating: IP-68
Benefits
High Strength Stainless Steel
Construction
No Internal O-rings
Wide Operating Temperature
Pressures up to 100 PSI
Low Static and Thermal Errors
Unparalleled Price and Performance
Rugged Design
New Conduit Fitting at Electrical
Applications
Ground Water Level
Measurement
Earthen & Concrete Dams
Liquid Tanks
Irrigation
Environmental Sites
Building Automation
Controls
Waste Water Canals
Connection
Compatible with Wide Variety of Liquids
EMI/RFI Protection
Performance @ 25°C (77°F)
Accuracy (Pressure)* < ±0.25% of FS BFSL
Accuracy (Temp.)* < ±1.0% of FS BFSL
Over Range Protection 2X Rated Pressure
Burst Pressure 5X or 1,250 PSI (whichever is less)
Pressure Cycles > 50 Million
* Accuracy includes non-linearity, hysteresis & non-repeatability
Electrical Data
Output 4-20mA
Excitation 10-28VDC 10-28VDC
Current Consumption: - < 10mA
Sampling Rate 400Hz 400Hz
Output Noise: < 1mV, RMS < 1mV, RMS
Zero Offset < ± 0.5% FS < ± 0.5% FS
Span Tolerance < ± 0.5% FS < ± 0.5% FS
Output Load: 0-800 Ohms@10-28VDC 5k Ohms, min.
Reverse Polarity Protection Yes Yes
+
For units with loop-powered 4-20mA output, the pressure loop must be powered or the temperature output will not operate.
American Sensor Technologies 450 Clark Dr., Mt. Olive, NJ 07828 phone (973) 448-1901 fax (973) 448-1905 email: info@astsensors.com
+
1-5V
TM
Ordering Information
AST45PT L 00005
1 1
Series Type
Temperature Output Range
1= -40 to 85°C (-40 to 185°F) 2= -40 to 125°C (-40 to 257°F) 3= 0 to 70°C (32 to 158°F) 4= -55 to 125°C (-67 to 250°F) 5= -18 to 93°C (0-200°F)
Conguration Interface
L= Cone (removable)
Pressure Range
Insert 5-digit pressure code
Pressure Unit
H= Inches H
O P= PSI
2
Outputs
3= 1-5V 4= 4-20mA
Electrical
N= Conduit tting,
Cable 6 ft.
(for wiring information visit: http://www.astsensors.com/wiring.php)
P= Conduit tting,
Cable 10 ft.
X= Optional Length (see options)
4
X
NP
065
Wetted Material
1= 316L / 304 / Hytrel (cable) / Kynar (cord grip)
Fail Condition
N= Not Specied H= Fail High L= Fail Low
Options Cable Lengths: 140= 15 ft. (4.6 m) 075= 20 ft. (6.1 m) 074= 25 ft. (7.6 m)
AST45PT
*2.5 and 7.5 PSI Sensor must be ordered in inches of H2O.
004= 35 ft. (10.7 m) 130= 40 ft. (12.2 m) 065= 50 ft. (15.2 m)
Gauge PSIG Pressure Code Feet of Water Column @ 4ºC (approx.)
0-100 00100 230.67
0-50 00050 115.33
0-30 00030 69.20
0-20 00020 46.13
0-15 00015 34.60
0-10 00010 23.07
0-7.5* 00208* 17.30
0-5 00005 11.53
0-2.5* 00069* 5.77
0-1 00001 2.31
003= 100 ft. (30.5 m) 050= 150 ft. (45.7 m)
Pressure Ranges
www.astsensors.com
© 2014 American Sensor Technologies Inc. AST45PT 03/13/2014.
All specications subject to change without notice.
Loading...
+ 1 hidden pages