Associated B64 CLUB RACER User Manual
2
:: Introduction
Thank you for purchasing this Team Associated product. This assembly manual contains instructions and
tips for building and maintaining your new RC10 B64 CR. Please take a moment to read through this
manual to help familiarize yourself with these steps.
We are continually changing and improving our designs; therefore, actual parts may appear slightly
different than in the illustrations. New parts will be noted on supplementary sheets located in the
appropriate parts bags. Check each bag for these sheets before you start to build.
:: KIT Features
• Lightweight, hard anodized aluminum chassis with centralized mass
• Graphite front and rear shock towers with multiple mounting positions
• 3 gear differentials with lightweight internal gears
• Rear Anti-Roll Bar Included
• Rear hubs feature large bearings and the easy-insert system to adjust camber link position and
rear axle height
• V2 12mm “Big Bore” threaded aluminum shocks with 3mm shafts and x-rings for improved smoothness
• Heavy-duty ball cups and ball studs allow for maximum suspension travel while reducing binding and
friction
• Factory Team ball bearing kit included
• Bolt on steering block arms offer increased adjustability
• J-Concepts B64 clear body and wing included
:: Additional
Your new B64 Club Racer Kit comes unassembled
and requires the following items for completion
(refer to catalog section for suggestions):
• R/C two channel surface frequency radio system
• AA-size batteries for transmitter (#302 alkaline)
• Battery charger (a peak detection charger, or LiPo compatible charger)
• 2 cell LiPo battery pack (#310, 317, 737, 738)
• Polycarbonate specific spray paint
• Cyanoacrylate glue (#1597)
• Thread locking compound (#1596)
• Tires and Inserts, Fronts and Rears
• Wheels w/12mm Hex
Front Wheels #91574, #91575, #92095, #92096
Rear Wheels #9695, #9696, #91570, #91571
Tools needed:
• FT Hex/Nut Wrenches (AE Part # 1519)
:: Other Helpful Items
• Silicone Shock Fluid (Refer to catalog for complete listings) • Silicone Diff Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part # 1737) • Reamer / Hole Punch • Wire Cutters • Hobby Knife
• FT Hex Wrenches (AE Part # 1655) • Needle Nose Pliers • Thread Lock (AE Part #1596)
• Soldering Iron • Calipers or a Precision Ruler • Green Slime shock lube (AE Part # 1105)
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · www.facebook.com/Team Associated
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
3
:: Hardware - 1:1 Scale View
Button Head (bhcs)
Cap Head (shcs)
2x4mm (31510)
Aluminum (8545)
2.5x8mm (31521)
3x6mm (31531)
Aluminum (8550)
Titanium (91580)
3x8mm (31532)
Aluminum (8552)
Titanium (91581)
3x10mm (25211)
Aluminum (8554)
Titanium (91582)
3x12mm (89202)
Titanium (91583)
3x14mm (25187)
Titanium (91584)
3x16mm (89203)
Titanium (91585)
3x20mm (25188)
Titanium (91587)
3x24mm (89204)
Titanium (91589)
1.6 x 5mm (91611)
2x5mm (31511)
Flat Head (fhcs)
Set Screws
Shims and Washers
Servo Mount Washer (7337)
(.250 x .125 x .815)
FT Ballstud Washer, Aluminum
2.5x8mm (31448)
3x6mm (31541)
Aluminum (8551)
Titanium (91591)
3x8mm (25201)
Aluminum (8553)
Titanium (91592)
3x10mm (25202)
Aluminum (8555)
Titanium (91593)
3x16mm (25204)
Titanium (91596)
3x3mm (25225)
3x20mm (91737)
(0.5mm) (31381)
Ball Bearings
3x7x3mm (91475)
5x8x2.5mm (31400)
5x10x4mm (91560)
6x13x5 (91562)
10x15x4 (91563)
Ballstuds
Silver HD 4mm (91451)
FT Ti HD 4mm (91750)
Ti Nitride HD 4mm (91452)
HD 6mm (91047)
FT HD Ti 6mm (91751)
Ti Nitride HD 6mm (91118)
Silver HD 8mm (91048)
FT Ti HD 8mm (91752)
Ti Nitride HD 8mm (91119)
HD 10mm (91049)
FT Ti HD 10mm (91753)
Ti Nitride HD 10mm (91120)
Nuts (lock/plain)
Notes:
FT Ballstud Washer, Aluminum
(1mm) (31382)
FT Ballstud Washer, Aluminum
(2mm) (31383)
M3 Alum. Locknut, Blue (31550)
M3 Nut (91477)
M3 Locknut, Black (25215
M3 Locknut w/Flange (25612)
FT 3mm Locknuts, Blue(25392)
M4 Locknut w/Flange (91148)
FT M4 Locknut, Blue (31551)
M4 Locknut, Serrated (91738)
4
:: Table of Contents
1....................Cover
2....................Introduction
3....................1:1 Hardware “Fold Out”
4....................Table of Contents
5 - 7..............Differential Build
(Bag 1.1, 1.2, 1.3)
7...................Chassis Build
(Bag 2.1, 2.2)
7....................Center Bulkhead Build
(Bag 3.1, 3.2, 3.3)
8....................Steering Rack Build
(Bag 4.1, 4.2)
8 - 10...........Front Gearbox Build
(Bag 5.1, 5.2)
12 - 14........Rear Gearbox Build
(Bag 8.1, 8.2)
14 - 15........Rear Hub Build
(Bag 9.1, 9.2)
15 - 16........Anti Roll Bars Build
(Bag 10.1, 10.2)
16 - 17........Turnbuckle Build
(Bag 11.1)
18 - 19........Shocks Build
(Bag 12.1, 12.2, 12.3)
19 - 21........Electronics, Wheel & Tire,
Wing & Body Install
(Bag 13.1, 13.2, 13.3)
22.................Notes
22 - 31........Catalog
10 - 11........Steering Block Build
(Bag 6.1, 6.2)
12.................Servo Build
(Bag 7.1, 7.2)
:: Notes
This symbol indicates a special
note or instruction in the manual.
!
This symbol indicates a Racers Tip.
Scanning this QR code will take
you to Team Associated’s Tech Tips
videos. These videos will help you
with your build and setup!
32.................Setup Sheet “Kit Setup”
33.................Setup Sheet “Blank”
34.................Back Cover
There is a 1:1 hardware foldout page in the
front of the manual. To check the size of a part,
line up your hardare with the correct drawing
until you find the exact size. Each part in the
foldout has a number assigned to it for ordering
replacement parts.
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · www.facebook.com/Team Associated
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
3/17
:: Front and Rear Gear Differential Build - Bag 1.1, 1.2, 1.3 - Step 1
5
92077
92079
Shim
x3
Sun Gear
Pin
5x8.5x0.17
92080
Front/Rear
Gear Diff Case
#6588
black grease
92078
Diff Outdrive
O-Ring
92082
Gear Diff
Outdrives
:: Front and Rear Gear Differential Build - Bag 1.1, 1.2, 1.3 - Step 2
92079
2.55x6.1x.25
92077
Diff Cross
Pin
92076
Planet Gear,
Plastic
Shim
x2
x4
x4
#6588
black grease
92076
Sun Gear,
Plastic
92079
x3
Shim
5x8.5x0.17
92075
B64 Ring
Gear, 42T
92078
Diff Outdrive
O-Ring
:: Front and Rear Gear Differential Build - Bag 1.1, 1.2, 1.3 - Step 3
92076
Sun Gear,
Plastic
92077
Sun Gear
Pin
10k diff
fluid #5455
screws evenly in a
!
Tighten the
crossing order!
92082
Gear Diff
Outdrives
4
1
2
3
31448
2.5x8mm
x4
FHCS
92078
Diff
Gasket
6
:: Center Gear Differential Build - Bag 2.1, 2.2, 2.3 - Step 1
92077
Sun Gear
Pin
x3
#6588
black grease
92080
Center Gear
Diff Case
92079
Shim
5x8.5x0.17
92078
Diff Outdrive
O-Ring
92082
Gear Diff
Outdrives
:: Center Gear Differential Build - Bag 2.1, 2.2, 2.3 - Step 2
92076
Sun Gear,
Plastic
92077
Diff Cross
92079
Shim
2.55x6.1x.25
Pin
x4
x2
92076
Planet Gear,
Plastic
:: Center Gear Differential Build - Bag 2.1, 2.2, 2.3 - Step 3
#6588
black grease
92079
x3
Shim
5x8.5x0.17
92083
Aluminum
Center Diff
Cap
92078
Diff Outdrive
O-Ring
92076
Sun Gear,
Plastic
Sun Gear
92077
Pin
x4
200k diff
fluid #5461
92082
Gear Diff
Outdrives
:: Center Gear Differential Build - Bag 2.1, 2.2, 2.3 - Step 4
4
1
!
Tighten the
screws evenly in a
crossing order!
2
3
31448
2.5x8mm
FHCS
92078
Diff
Gasket
x4
!
Tighten the
screws evenly in a
crossing order!
:: Chassis Build - Bag 2.1, 2.2 - Step 1
92002
B64 Side
Rails
25215
M3
Locknut
(Black)
1
3
92047
Battery
Strap
Mount
7
4
2
31531
3x6mm
BHCS
B64 Spur
Gear, 78T
92047
Battery
x4
92084
x2
Post
x2
#1596
92000
B64
Chassis
25202
3x10mm
FHCS
92003
B64
Steering
Posts
31541
3x6mm
FHCS
x3
thread lock
:: Center Bulkhead Build - Bag 3.1, 3.2, 3.3 - Step 1
92044
B64 Motor
92046
B64 Center
Bulkhead
Mount
31532
3x8mm
BHCS
92046
B64 Center
Bulkhead
Cover
x4
25202
3x10mm
FHCS
thread lock
25204
3x16mm
FHCS
x5
#1596
91563
10x15x4mm
Bearing
x2
#1596
25202
3x10mm
FHCS
x4
thread lock
Racers Tip:
You can Install two
red O-rings in each
outdrive on the
center diff to reduce
front to back center
bone play.
8
92004
Bellcrank
Input Arm,
91048
HD 8mm
x2
:: Steering Rack Build - Bag 4.1, 4.2 - Step 1
31521
92004
B64
Steering
Rack
91048
HD 8mm
Ball Stud
x2
2.5x8mm
BHCS
92005
Bellcrank
Input Arm,
18mm
92004
B64
Bellcrank
:: Steering Rack Build - Bag 4.1, 4.2 - Step 2
x3
91048
HD 8mm
Ball Stud
31382
1mm
Shim
25215
M3
Locknut
(Black)
92004
B64
Bellcrank
25187
3x14mm
BHCS
x2
91475
3x7x3mm
Bearing
31382
1mm
Shim
x4
x2
31400
5x8x2.5mm
Bearing
x4
!
92008
B64
NOTE:
92071
B64 Input
Shaft, 17T
#6588
black grease
The steering rack should
swing freely left and right
once assembled. Do not
overtighten (#25187)!
:: Front Gearbox Build - Bag 5.1, 5.2 - Step 1
Gearbox
!
NOTE:
Align the hook at the end of
the Input Shaft Retainer in
the flat section of the input
shaft.
91563
10x15x4mm
Bearing
x2
92072
B64 Input
Shaft
Retainer
:: Front Gearbox Build - Bag 5.1, 5.2 - Step 2
Arm Mount Insert,
Arm Mount B
1° Up
92014
Arm
Mount
Inserts
89202
3x12mm
BHCS
x2
x2
91563
10x15x4mm
Bearing
25211
3x10mm
BHCS
92017
B64 HRC
Arm
Mount, B
x2
x2
:: Front Gearbox Build - Bag 5.1, 5.2 - Step 3
1
3x20mm
Outdrive
Diff Shims
25188
BHCS
92079
x2
x8
92008
B64
Gearbox
9
Step 1:
Add shims on
this side to
TIGHTEN
gear mesh.
Subtract shims
on this side to
LOOSEN
gear mesh.
Step 2:
Add or subtract
shims here to
finalize diff side
to side play once
gear mesh is
set from Step 1.
2
91533
Shock
Standoff,
Short
x2
25215
M3
Locknut
(Black)
x2
:: Front Gearbox Build - Bag 5.1, 5.2 - Step 4
Install FWD Center
Dog Bone as shown!
92009
B64 Front
Shock Tower
!
NOTE:
91048
8mm HD
Ball Stud
x2
92065
B64 FWD Center
Dog Bone, 82mm
1
2
25211
3x10mm
BHCS
x4
!
NOTE:
Add one drop of
black grease to
all screws holding
the gearbox !
25204
3x16mm
FHCS
#6588
black grease
x2
25202
3x10mm
FHCS
x3
10
:: Front Gearbox Build - Bag 5.1, 5.2 - Step 5
92038
B64 Front
Body Post
92038
B64 Top
Plate
31541
3x6mm
FHCS
:: Front Gearbox Build - Bag 5.1, 5.2 - Step 6
Arm Mount Insert,
Arm Mount A
#1596
thread lock
25202
3x10mm
FHCS
x4
1° Down
92015
B64 HRC
92025
B64 Front
Arm Shim,
1mm
31531
3x6mm
Arm
Mount, A
BHCS
92024
Hinge Pin
92025
B64 Front
Arms
92037
B64 Front
Bumper
:: Steering Block Build - Bag 6.1, 6.2 - Step 1
91048
HD 8mm
Ball Stud
31382
1mm
Shim
25215
Locknut
(Black)
M3
31532
3x8mm
BHCS
92032
B64 Alum.
Steering
Arms
x2
91047
HD 6mm
Ball Stud
31382
1mm
Shim
92029
B64 Alum.
Caster Block,
10 Degree
89202
3x12mm
BHCS
x2
92014
Arm Mount
Inserts
+1
x2
92031
B64 Steering
Blocks
91676
Caster Block
Bushings
+2
:: Steering Block Build - Bag 6.1, 6.2 - Step 2
#1596
thread lock
89202
3x12mm
BHCS
x2
#6588
black grease
11
91438
CVA Rebuild
Kit,
92058
B64 Front
CVA Bone.
76mm
#1596
thread lock
:: Steering Block Build - Bag 6.1, 6.2 - Step 3
91560
5x10x4mm
Bearing
x2
91438
CVA Rebuild
Kit
92060
B64 Front
CVA Axle
92061
B64 Front
CVA Retainer
9956
Front Hex
Roll Pin
92059
B64 Front
Crush Tube
:: Steering Block Build - Bag 6.1, 6.2 - Step 4
31510
2x4mm
BHCS
92063
Wheel Hex,
5.0mm
92024
Hinge Pin
Loading...