Page 1
ALF1138
Page 2
Page 3
Page 4
2
Page 5
3
Page 6
4
Page 7
Drain pipe
Wash tub
A
bo
ut 2c
m
5
Page 8
678
Page 9
Page 10
Page 11
Algodón
Eco40-60
Deporte
Edredón
Lana
Centrifugado
Inicio/Fin
Mix
Sintético
Delicado
Ropa bebé
Rápido 15′
Rápido 42′
Limpieza tambor
Aclarado &
Centrifugado
***
***
***
***
* Presione 3 seg. para función de bloqueo.
9
Page 12
Eco40-60
Eco40-60
10
Page 13
11
Page 14
121314
Page 15
Page 16
Page 17
15
Page 18
16
Page 19
65
68
48
142
15
42
75
17
11
47
88
44
218
17
76
Page 20
18
Page 21
***
***
***
***
19
Page 22
20
Page 23
21
Page 24
222324
Page 25
Page 26
200W
500W
1500W
1700W
1200RPM
75
Page 27
25
Page 28
ALF1138
Page 29
Content
Safety Notifications
Part Name
Installation Instruction
Methods of Door Lock and Remove
The Usage Method of the Detergent Box
Function Introduction of Operating Panel
The Introduction of Function and Program
Introduction of Washing Programs
Maintenance
Varieties of Functions
Notice before Washing
Non-fault Conditions
Troubleshooting Guide
Specification
Environmental Protection
2
3
4
9
9
10
12
21
22
24
26
28
29
30
31
Page 30
Page 31
Safety Notifications (Please Must Follow)
In order to prevent the harm or damage to the user or the person and
property of others, please make sure to follow the safety issues.
Warnings
The risk of electric shock.
1.Please use 220-240V, above 10A with
ground wire dedicated socket.
2.When inserting and pulling out the
power cord please use the plug, please.
Don't use the damaged power cord.
When the power cord pin is dirty please
wipe clean with dry cloth in time.
3.Do not use the wet hand to insert or
pull out the plug.
4.Please pull out the plug when finishing,
repairing or cleaning.
The danger of high temperature
1.When washing in high temperature,
the door glass will be heating. Please do
not touch the door glass, especially
children.
2.When opening the door after high
temperature washing, please wait for the
temperature cooled down to a safe level
and the door will unlocked automatically.
The danger of injury
1.Do not put any heavy things on the
top of the washing machine.
2.If you want to move the machine,
please remember ask for help.
3.Please do not ask unprofessional
people to repair the machine.
The danger of fire and current leakage
1.Do not allow the washing machine
close to the fire, or lighted cigarettes,
candles and volatile materials.
2.Please do not sprinkle the water on
the control panel of washing machine.
3.Please do not put the washing
machine in the place of wet and outside
place.
4.Please fix the drain pump and make
sure the sewer unobstructed.
The danger of getting hurt
1.Please handle the carton box after
removing, don't let the children touch or
eat.
2.Do not allow the children to operate or
climb up to the washing machine.
3.Please close the door after use to
avoid the children enter into the drum.
The danger of damage the cloths
1.Please do not wash the cloths which
is waterproof, like Raincoat, feather
products, sleeping bags
2.Please wash the cloths which can be
washed, if you have any doubt, please
following the instructions.
The danger of explosion
1.Please do not washing the cloths which
stained with kerosene, gasoline, thinner,
inflammable goods.
2.Please do not washing when gas leakage.
If want to open the door when the
machine running or other circumstances,
please check the water level in the drum
first in order to avoid the water overflow
tand cause unnecessary loss.
2
Page 32
Attachment specification
Instructionwater hoseswrench
Part name
Part name
Inlet values
Door assembly
Wash and spin tub
Detergent box
Adjustable feet
The above picture is just for refference,the detailed
information should be based on the real product！
Control Panel
Power line
Cabinet
Notice：
1.The first use may drain
some water out. It's
residual water after
performance test,
belong to the normal
phenomenon.
2.After each use, please
pull the plug and turn off
the faucet to prevent
accidental flood or fire.
3
Page 33
Installation instruction
Make sure the temperature of the places where the washer is installed
or placed above 0℃ or put it outside.
Place the washer correctly according to management standards and
regulations.
Keep the base of washer ventilated when it is placed on the ground
with carpet.
There are too much pests in villages. Please keep the surroundings
clean because any damages caused by cockroaches or other pests
don't belong to warranty.
Transport bolt
Washers are installed with transport bolt to prevent internal damage
in transit.
Dismantle the transport bolt
1.In order to prevent internal damage in transit, 4 bolts are installed.
Before using the washer, dismantle the bolt (see chart 1 ).
If the bolts are not dismantled, violent vibration, noise and trouble
will be caused.
2.Use the attached wrench to loosen the 4 bolts (see chart 2).
3.Twist the bolt rubber slightly and then pull out the bolts, keep the
bolts and wrench as standby(see chart 3).
The bolts should be remounted no matter when to transport the washer.
4.Use attached stopples to seal the screw holes(see chart 4).
4
Page 34
Requires for positions
Horizontal adjustment:
The slant angle should be less than 1 degree.
Drain pipe
Power outlet
The distance between any side of washer and
power outlet should be within 1.5 meters.
Wash tub
A
bo
u
t 2
c
m
Don't use too many electrical appliances
in one outlet.
Environment cleaning
It's necessary to clean the wall, door and ground.
Install the washer on a hard and steady ground with floor drain rather
than soft blanket or wooden floor.
Don't put dirty clothes or some other goods on a washer's head cover,
otherwise it may impact the normal operation.
Notice
Power connection
1.Don't use the wiring board or something like that.
2.If the power lines are damaged, please contact professionals to repair.
3.After the use of washer, pull the plug and turn the tap off.
4.Connect the washer with grounded outlet to correspond to the wiring
principles.
5.Place the washer in which is easy to connect the outlet.
Contact the maintenance center and ask professionals to repair the
washer. Laypeople may cause damages and troubles on the washer.
Don't put the washer in the place where the temperature is below zero.
The pipes will be frozen and break. Moreover, the temperature below
zero will damage the programming controller.
If move the washer in an environment whose temperature is below
zero, please keep the washer at room temperature for a few hours
before starting it.
Grounding introduction
A washer must have the grounding devices. If a trouble happens, the
device can reduce the risk of electrical shock. The device is equipped
with a cable (including a wire and a grounded plug). The grounded plug
must be inserted in an appropriate outlet. If you want to know if the
washer is grounded correctly, please contact with professional
maintenance staff. If the plug can't match with the outlet, please don't
change the plug by yourself.
Once your washer smokes or emits an odor, please cur the power and
contact with professional maintenance staff.
5
Page 35
Washers should be connected with water inlet. Please use
attached new plumbing rather than the old.
In order to ensure the quality, water injection tests are carried out
before the washer leaves factory, so there may be water inside the
internal tub, door seals and door panel, which are normal.
Water inlet connection
1.The pressure of supply water should be between
30kPa and 1000kPa.
2.Don't abrade the screw thread when connect the
inlet pipes with valves.
3.Please install dropping equipment if the pressure
of supply water surpasses 1000kPa.
Two seals are supplied in the connectors of both ends
of the pipe to prevent water leaking.
Turn on the tap and check if the connectors leak.
Check the pipes regularly. Please change them if necessary.
Make sure the pipes don't be damaged or twine with each other.
Use the standard faucet
standard faucet
longer faucet
square faucet
water pipe connector
rubber gasket
The connection of inlet pipes and taps
Check the rubber seals on both sides of the hose.
-insert a rubber seal into the threaded fittings on each
hose to prevent leaking.
After connecting inlet hose to water faucets, turn on the
water faucets to flush out foreign substances (dirt, sand
or sawdust) in the water lines. Let water drain into a
bucket, and check the water temperature.
Check for leaks by turning on the faucets. If water leaks, check steps 1 to 4 again.
Connect the water supply hoses to the water faucets tightly
by hand and then tighten another 2/3 turn with pliers.
-Connect the blue hose to water faucet.
Connect the hoses to the water inlet tightly by hand and
then tighten another 2/3 turn with pliers.
Water inlet
6
Page 36
Such washing machine is designed for home appliances,
please
do not install it on ship, traveling truck or plane.
Please turn off the stopcock if long time out of use.
(e.g vacation)
Please remove plug and cancel door lock function to avoid child
locking himself/herself inside.
Packing materials(e.g film, foam) could harm child's safety and
cause asphyxia! Attention: MAKE ALL PACKING MATERIEALS
OUT OF CHILD REACH.
Install drain-pipe
Please fix the drain-pipe by a lifting rope.
For the sake of lightening damage of leak towards ground, please
place the drain-pipe correctly.
In order to avoid siphon,the height of drain-pipe should between
(0.85m-1.25m),moreover, the terminal of is should not be placed in
water.
If the drain-pipe is too long, please do not force to insert it into
washing machine, which would cause abnormal noise.
(Please check sketch map next page)
The instruction of installation of pipe
Horizontal Adjustment
To avoid noise and vibrate by adjusting washing machine level.
place it at the room corner preferably.
If ground not level, please adjust alignment
pins.
Do not put wood pieces or something
like, please make sure four alignment pins
touch ground tightly, and machine level
completely.
7
Page 37
Adjust adjustable feet
Adjust the adjustable feet to make sure the
washing machine in balance, which can be placed
on the ground steadily.After settling, screw the
locknut to guarantee.Do not place the
washing machine in the platform ,which is higher
than the ground, in order to prevent the machine
from falling down because of other accidents.
The diagonal check
Applying force downward on the diagonal of the
washing machine, washing machine should not
shake. (both diagonal need to check, if the
washing machine shake, must readjust
adjustable foot.)
8
Page 38
Methods of Door Lock and Remove
DOOR LOCK
After operating ,the door will be locked automatically and
light/picture on the panel is lighting.“DOOR LOCK”
Remove Door Lock
When
“DOOR LOCK”light/picture is lighting,press“Start/Pause”,
WASHING/DEWATERING drum stop operating.Please wait for about
10s, door lock will be removed automatically.
Unplug directly and wait for about 65s~85s,door lock will be
removed automatically.
Foam overflowing if open the door during operating,
please
catch foam with towel.
If temperature is too high,
the door can not be opened during
operating.
If water level is too high,
the door can not be open during operating.
The Usage Method of the Detergent Box
Synthetic Detergent
Powder
Please dissolve detergent
(e.g soap pieces)before
putting into detergent box.
Liquid detergent.Bleach
Please use detergent with
less foam.
Please use two times water
to dilute the concentrated
type detergent before putting
into detergent box.
Pre-wash Detergent
If the clothes is very dirty, please
choose pre-wash function, add
proper amount detergent.
Softener
Please put softener before washing,
which will pour into drum
automatically when last potch
happening.
When using concentrated type
softener, please dilute it with
appropriate water.
Do not exceed MAX mark.
Use special detergent.
Do not use too much detergent which will cause
too much foam and affect washing quality or will
cause malfunction.
Select detergent according to cloths variety,color,
water temperature and contamination level.
Please use moderate detergent to get washing
effect and protect environment.
9
Page 39
Function Introduction of Operating Panel
1
Syn theti c
40- 60
***
***
***
***
7
Image shown here is indicative only. Actual product you receive may differ.
8
463
5
2
1 POWER
Press it to turn off/on power.
Procedure over, power off automatically.
2 Start/Pause
Press START button to start operation.
Press PAUSE button to stop, and press it again to continue.
3 Knob
Rotate it to select additional function.
4 “Function” button
After starting up the machine by pressing the power button, choose your
favorite program, and you can choose different functions by switching from
Pre Wash, Soak, Crease Care, Wash, Extra Rinse.
5 “Select” button
After starting up the machine by pressing the power button, choose your
favorite program; After choosing extra function by the function button, you
can switch different options or cancel the extra function by pressing the
Option button.
6 “Temp.” button
When push the power button to start the machine and select the program,
you can choose proper water temperature according to the material of cloths.
91110
10
Page 40
7 “Speed” button
When push the power button to start the machine and select the program,
you can choose different spin speed .
8 “Additional Function”
According to your request, you can add the additional function to the basic
programs. The additional function will be different according to different basic
programs. (Please take reference the additional functions introduction in
details).
Child Lock Lamp
9
To avoid the children wrongly operations
If you want to start child lock function, you should push “Pre Delay” button for 3
seconds during the running process of washing machine. To unlock child lock
function, you can push “Pre Delay” button for 3 seconds during the running
process or under non- running process. (Please check the detailed introduction
of child lock function in the “additional function introduction”).
10 Display Screen
To display the remaining time or prewash time
Remaining time gradually reduce in accordance with the washing.
During the process of washing, if there is a abnormal phenomenon, the screen
will display the error code accordingly.
If the remaining time is different with the real time, the program will adjust
according to the real situation. It is not an error.
If the program has self-weight function, the screen will display“ - - -”. If washing
machine is in the process of weighting, the screen will flash“–”. If the weighting
function ends, the screen will display the remaining time of washing.
11 The reminding window of washing status
There are four indicator lamp on the top, represent weighting, washing, rinse
and spin.
When setting the programs before washing, if some indicator lamp lights, it
means that this washing program has the following washing process; When the
machine is running, if one indicator lamp lights, it means the current washing
process is under this status; If some indicator lamp always flash, it means that
the following washing process include the corresponding programs.
11
Page 41
The introduction of function and program
Usage of routine clothes
1.Preparations
Open the door put clothes in and closes the door.
Pull out the detergent box, add detergent and close the box.
Connect the inlet pipes and make sure the tap turned on.
2.Press the power button
3.The programs can be selected according to requirements.
Cotton-Synthetic-Delicate-Baby Care-Quick 15’-Quick 42’-Tub Clean-
Rinse+Spin-Spin-Wool-Duvet-Sports-Eco40-60-Mix
4.Press Start/Pause button and begin to wash
5.Washing Ending
The screen displays “End” with a hum.
Open the door and take out the cloth.
Pull out the plug and close the faucet.
The usage of self-compiled program
You can use it when need to set washing intensity, rinse times, water
temperature, spin speed.
1.Prepare to wash
Open the door, put clothes in and close the door.
Pull out the detergent box, add detergent and close the box.
Connect the inlet pipes and make sure the tap turned on.
2.Press the power button
3. The programs can be selected according to requirements.
4. Push “Temp.”/“Speed”/“Function” /“Select”/“*Pre Delay”button to
set water temperature, spin speed,washing intensity, rinse times, delay time.
5. Press the Start/Pause button to start washing.
6.When the program ends, it will have a hum sound.
The screen displays “End” with a hum.
Open the door and take out the cloth.
Pull out the plug and close the faucet.
12
Page 42
Cotton Program Introduction
This program is suitable for the clothes which are moderate or mild dirty,
like cotton, beddings, underwear, towels and shirt, etc…
1.Preparation for washing
Open the door, put the clothes then close the door
Taking the detergent box and add detergent then close it.
Connect the water inlet pipe well and make sure the faucet is running.
2.Push “Power” button and connect to the power
3.Turn the program button to choose “Cotton” program
The washing program will be selected automatically.
Choose the needed water temperature, spin speed, rinse times and
washing intensity.
4.Push “Start/Pause ”button to start washing
5. When the program ends, it will have a hum sound.
If you want to change the current setting during the process of washing, please
push “Start/Pause” button first and stop washing, then push button to reset.
When the washing machine washing towel, the yarn will be squeezed, washing
will get rough surface, using the fiber softening agent, to prevent this kind of
phenomenon happens to the greatest extent.
Synthetic Program Introduction
To wash the synthetic clothes
1.Preparation for washing
Open the door, put the clothes then close the door.
Taking the detergent box and add detergent then close it.
Connect the water inlet pipe well and make sure the faucet is running.
2.Push “Power” button and connect to the power
3.Turn the program button to choose “Synthetic” program
The washing program will be selected automatically.
Choose the needed water temperature, spin speed, rinse times and
washing intensity.
4.Push “Start/Pause ”button to start washing
5.When the program ends, it will have a hum sound.
If you want to change the current setting during the process of
washing, please push “Start/Pause” button first and stop washing,
then push button to reset.
In order to prevent clothing damage, speed cannot set the highest
speed, the temperature cannot be set to "90℃"
13
Page 43
Delicate Program Introduction
Washing gauze, silk underclothes.
1.Prepare for washing
Open the door, put the clothes then close the door.
Taking the detergent box and add detergent then close it.
Connect the water inlet pipe well and make sure the faucet is running.
2.Push “Power” button and connect to the power.
3.Turn the program button to choose “Delicate” program.
The washing program will be selected automatically.
Choose the needed water temperature, spin speed, rinse times and
washing intensity.
4.Push “Start/Pause ”button to start washing.
5.When the program ends, it will have a hum sound.
If you want to change the current setting during the process of
washing, please push “Start/Pause” button first and stop washing,
then push button to reset.
In order to prevent clothing damage, speed cannot set the highest
speed, the temperature cannot be set to "60 ℃ "and "90 ℃".
Baby Care Program Introduction
This program is to wash infant clothing,allergy people clothing and clothing
need high temperature bacteria suppression mite.
1.Prepare for washing
Open the door, put the clothes then close the door.
Taking the detergent box and add detergent then close it.
Connect the water inlet pipe well and make sure the faucet is running.
2.Push “Power” button and connect to the power
3.Turn the program button to choose “Baby Care” program
The washing program will be selected automatically.
Choose the needed water temperature; spin speed, rinse times and
washing intensity.
4.Push “Start/Pause ”button to start washing
5.When the program ends, it will have a hum sound.
If you want to change the current setting during the process of
washing, please push “Start/Pause” button first and stop washing,
then push button to reset.
Reach the best temperature aseptic divide mite effect, can choose
"90 ℃"．
14
Page 44
When taking out of clothes, please pay attention to the internal heating
steam. To avoid scald, Open the door to exhaust first,and then remove
clothes.
Quick 15’ Program Introduction
To wash clothes that are changed frequently, not too dirty and thin clothes
1.Prepare for washing.
Open the door, put the clothes then close the door.
Taking the detergent box and add detergent then close it.
Connect the water inlet pipe well and make sure the faucet is running.
2.Push “Power” button and connect to the power.
3.Turn the program button to choose “Quick 15'” program
The washing program will be selected automatically.
Choose the needed water temperature, spin speed, rinse times and
washing intensity.
4.Push “Start/Pause ”button to start washing.
5.When the program ends, it will have a hum sound.
If you want to change the current setting during the process of
washing, please push “Start/Pause” button first and stop washing,
then push button to reset.
In order to prevent clothing damage, speed cannot set the highest
speed, the temperature can be set to "cold","20℃","40℃"
prevent the door from distorting.
In order to ensure the washing effect, washing is suitable for the
washing capacity under 2 kg.
Quick 42’ Program Introduction
To wash clothes that are changed frequently, not too dirty and thin clothes
1.Prepare for washing.
Open the door, put the clothes then close the door.
Taking the detergent box and add detergent then close it.
Connect the water inlet pipe well and make sure the faucet is running.
2.Push “Power” button and connect to the power.
3.Turn the program button to choose “Quick 42'” program
The washing program will be selected automatically.
Choose the needed water temperature, spin speed, rinse times and
washing intensity.
15
Page 45
4.Push “Start/Pause ”button to start washing.
5.When the program ends, it will have a hum sound.
If you want to change the current setting during the process of
washing, please push “Start/Pause” button first and stop washing,
then push button to reset.
In order to prevent clothing damage, speed cannot set the highest
speed, the temperature can be set to “cold”,"20℃","40℃"
prevent the door from distorting.
In order to ensure the washing effect, washing is suitable for the
washing capacity under 2 kg.
Tub Clean Program Introduction
16
Page 46
Rinse and Spin Program Introduction
The machine will not wash, only rinse and spin.
1.Prepare washing
Open the door and put the cloths then close the door
2. Push “Power” button and connect to the power
3. Turn the program button to choose“Rinse+ Spin” program
The washing program will be selected automatically.
Choose the proper spin speed and rinse times.
4.Push “Start/Pause ”button to start washing.
5.When the program ends, it will have a hum sound.
If you want to change the current setting, please push “Start/Pause”
button first and stop washing, then push “Rinse” and “Spin Speed”
button to reset.
The Spin speed can be selected the highest, but the temperature
cannot be set.
Spin Program Introduction
The machine will not wash and rinse, only spin.
1. preparation for washing
Open the door, put clothes in and closes the door.
2. Press the power button, connect the power.
3. Rotate the program button and choose the “Spin”
The default rotate speed is 88r/m, pressing “Speed” button
can adjust the speed.
4.Press the Start/Pause button
Begin to drain away water and spin.
5.When the program ends, it will have a hum sound.
If you want to change the current settings during the process of spin,
please push the “Start/Pause” button to stop the washing machine
and then push “spin speed” button to change.
During the process of spinning, the actual spinning speed may be
inconsistent with the program speed, which is because the washer
adjust the speed according to the balance between clothes.
There may be rhythmic drone during spinning, which is the normal
voice of drain bump rather than the machine fault.
17
Page 47
Wool Program Introduction
Wash wool fiber texture, such as machine washable wool fabrics, etc.
1.Prepare for washing
Open the door, put the clothes then close the door.
Taking the detergent box and add detergent then close it.
Connect the water inlet pipe well and make sure the faucet is running.
2.Push “Power” button and connect to the power
3.Turn the program button to choose “Wool” program
The washing program will be selected automatically.
Choose the needed water temperature, spin speed, rinse times and
washing intensity.
4.Push “Start/Pause ”button to start washing
temperature, dewatering speed and appoint time.
5. When the program ends, it will have a hum sound.
If you want to change the current setting during the process of
washing, please push “Start/Pause” button first and stop washing,
then push button to reset.
In order to prevent clothing damage, speed cannot set the highest
speed, the temperature cannot be set to "60 ℃ "and "90℃"
After washing completed, take the clothes in time, drying, after
shaking loose plastic deformation in order to avoid placing time
is too long.
Please separate white or bright color clothes from the dark clothes
for washing.
Using special wool detergent can reduce clothing damage, improve
the washing effect.
Duvet Program Introduction
The cloths have the machine-washable mark, like bedding, bed
sheets, curtains, etc
1.Prepare for washing
Open the door, put the clothes then close the door
Taking the detergent box and add detergent then close it.
Connect the water inlet pipe well and make sure the faucet is running.
2.Push “Power” button and connect to the power
3.Turn the program button to choose “Duvet” program
The washing program will be selected automatically.
Choose the needed water temperature, spin speed, rinse times and
washing intensity.
18
Page 48
4.Push “Start/Pause ”button to start washing
5.When the program ends, it will have a hum sound.
If you want to change the current setting during the process of washing,
please push “Start/Pause” button first and stop washing, then push button
to reset.
In order to prevent clothing damage, speed cannot set the highest speed,
the temperature cannot be set to "60 ℃" and "90 ℃"
The electric blanket and carpet cannot be washed.(It will damage the
machine and clothes).
Put the clothes in the washing drum properly and uniform when
spinning, in order to avoid large vibration and drying time maybe
extended.
Heavy clothes cannot be entanglement ,need to put inside the
washing machine after shaking loose.
Uneven clothes can lead to not spinning (display UE), take out again
in the after washing to shake loose.
Sports Program Introduction
Wash the machine- washable sports clothes
1. Prepare for washing
Open the door, put the clothes then close the door
Taking the detergent box and add detergent then close it.
Connect the water inlet pipe well and make sure the faucet is running.
2. Push “Power” button and connect to the power
3. Turn the program button to choose “Sport” program
The washing program will be selected automatically.
Choose the needed water temperature, spin speed, rinse times and
washing intensity.
4.Push “Start/Pause ”button to start washing
5.When the program ends, it will have a hum sound.
If you want to change the current setting during the process of
washing, please push “Start/Pause” button first and stop washing,
then push button to reset.
In order to prevent clothing damage, speed cannot set the highest
speed, the temperature cannot be set to "60 ℃" and "90 ℃"
19
Page 49
Eco40-60 Program Introduction
To wash the clothes that is not too dirty, it will save time and water.
1.Preparation for washing
Open the door, put clothes in and closes the door.
Pull out the detergent box, add detergent and close the box.
Connect the inlet pipes and make sure the tap turned on.
2. Press the power button, connect the power.
3. Rotate the program button and choose the “Eco40-60”
The washing program will be selected automatically.
Choose the needed water temperature, spin speed, rinse times and
washing intensity.
4. Press the Start/Pause button and begin to wash.
5. When the program ends, it will have a hum sound.
When the washer is working, if you want to change its setting, please press
the start/pause button to stop running temporarily and then choose the
program you need.
Mix Program Introduction
This function can be used to wash mix clothes like cotton, synthetic and
soon (please do not mix wash the clothes that easily rub off.
1.Prepare for washing
Open the door, put the clothes then close the door
Taking the detergent box and add detergent then close it.
Connect the water inlet pipe well and make sure the faucet is running.
2.Push “Power” button and connect to the power
3.Turn the program button to choose “Mix” program
The washing program will be selected automatically.
Choose the needed water temperature, spin speed, rinse times and
washing intensity.
4.Push “Start/Pause ”button to start washing
5.When the program ends, it will have a hum sound.
If you want to change the current setting during the process of washing,
please push “Start/Pause” button first and stop washing, then push button
to reset.
In order to prevent clothing damage, speed cannot set the highest speed,
the temperature cannot be set to "60 ℃" and "90 ℃"
Please separate white or bright color clothes from dark clothes.
20
Page 50
Introduction of Washing Programs
Program
Cotton
Synthetic
Delicate
Baby Care
Quick 15'
Quick 42'
Tub Clean
Rinse+
Spin
Spin
Wool
Duvet
Sports
Eco40-60
Mix
Temperature
(℃)
cold (20℃,40℃,60℃,90℃)
40℃(cold 20℃,60℃)
20℃(cold, 40℃)
60℃(40℃, 90℃)
cold(20℃, 40℃)
20℃(cold, 40℃)
60℃
40℃(cold ,20℃)
40℃(cold ,20℃)
cold(20℃, 40℃)
40℃(cold, 20℃, 60℃)
cold(20℃, 40℃)
Spin Speed
(Run/Min.)
1000(0,400,800,1200)
1000(0,400,800,1200)
800(0,400)
800(0,400,1000)
800(0,400)
800(0,400)
800
1000(0,400,800,1200)
1000(0,400,800,1200)
800(0,400)
800(0,400)
800(0,400)
1200(0,400,800,1000)
800(0,400)
Time(m)
65
68
48
142
15
42
75
17
11
47
88
44
218
76
Max.Load
(Kg)
Rated
Rated
≤2.0
≤4.0
≤2.0
≤4.0
Rated
Rated
≤2.0
≤2.5
≤4.0
Rated
Rated
Wash options
Normal(Time
Save,Intensive)
Normal(Time
Save,Intensive)
Normal(Time
Save,Intensive)
Normal(Time
Save,Intensive)
Time Save
(Normal,Intensive)
Normal(Time
Save,Intensive)
Normal(Time
Save,Intensive)
Normal
(Intensive)
Normal(Time
Save,Intensive)
Time Save
(Normal,Intensive)
Time Save
(Normal)
Normal(Time
Save,Intensive)
Instruction:
1.The needed time canbe changed due to water pressure, drain condition, clothing textile,weight, water
temperature changing.
2.During the process of washing,the time of washing and spining will be different with the real running time.
3.During the process of washing,the real display time will beat according to sensing the weight changing
of clothing.
4.Due to different weight of clothing and detergent, if the spin speed is too low, the rinse performance will not be
good, please increase times of rinse.
5.The data in the chart can be different from different models.
6.When editing the default program as energy efficiency program, washing time will increase automatically.
21
Page 51
Maintenance
Please maintenance washing machine to extend service life.
Before maintenance, please unplug.
Body of washing machine
After washing, please clean it with soft
cloth. If much contamination ,please
use appropriate detergent or soap.
Do not watering directly.
Do not use putty-powder,diluent,
The Clearance of
Detergent Box
Please clean the detergent
box regularly. Pall it out
and wash with clean water,
then insert back.
gasoline,alcohol to clean machine
body.
Push down
Door Gasket Ring
After washing, please remove
pull out
contamination, wastepaper and so
on, if foreign matter exists, please
remove.
The Clearance of Universal coupling ( Suggest:Once/ half year)
If waste accumulated, it will influence
water inlet speed.
1.Take off the soft pipe from
connecting part side.
2.Take off the screwing device according to the arrow showed.
3.Wash the inside of the screwing device.
4.Install the cleaned crewing device with the inlet soft pipe.
The clearance of inlet water valve ( Suggest:Once/ half year)
1.Take off the soft pipe from washing machine side.
2.Take off the filter net from water valve.
3.Clean the filter net with tooth-brash.
4.Install the soft inlet pipe.
22
valve of water
inlet
Page 52
Maintenance
When washing machine is frozen
1.Cover stopcock and connecting part with hot towel.
2.ake off the inlet pipe, and put it into 50 degree water.
3.Pour into the drum about 2-3L of 50 degree water.
4.Connect inlet pipe, turn on the stopcock and start the washing
machine, please check whether inlet and outlet is normal.
a.
Faucet
Connecting part
Inlet pipe
Ake off the inlet pipe,
b.
and put it into 50
degree water.
50 degree
water
The Clearance of dewatering-pump filter( Suggest: once/month)
1.Press fastener on the pump after dewtering and power off, open the
lid of water-pump filter.(Attention: if hot water inside, please go
ahead after it be cold.)
2.Take off the filter anti-anticlockwise.
3.Wash the filter.
4.Direct at pump and insert the filter, tighten it clockwise and tighten the lid.
Attention: a. Please tighten the filter well to avoid leak.
b. Please do not clean during operation.
The Drum Clearance (Suggest once/month)
After using for a period, some dirt maybe exist. You can clean the
inside and outside of drum by operating the drum procedure.
Attention: please do not put cloths and detergent when clearing the
drum.
Emergency Open the Door
When there is power cut and the door cannot be open normally, but you
need to open the door, please pull open the emergency door opening tab,
and remember to reset the emergency door opening tab.
The pull-tab is located at
the front right bottom of
the inside of the cover.
Please open the cover
when use.
c. Pour into the drum
about 2-3L of 50
degree water.
50 degree
water
Attention
Forbid to use the emergency door opening tab when the machine is running; When
you have to use it at emergency, please open the emergency door opening cover
when water cooling to avoid scald because there will be excess water flowing out
from the inner tub at high temperature.
23
Page 53
Varieties of Functions
***
***
***
***
1.
The Function and the Select Button
Prewash: If the cloths are too dirty, you can choose this program
before washing.
Soak: After selecting this function, there is a period of time for cloth
soaking, which can enhance the performance of washing.
Crease Care: After selecting this function, in order to resist wrinkling
or separate from the tub wall, the machine will have some shaking loose
actions for several minutes after spinning.at the water.
during last time of rinse in order to enhance the performance of rinse.
Wash
Pressing the Function button to switch to Wash, and press the “Select”
button within 3 seconds to switch from 3 different gears of Time Save,
Normal, and Intensive.(For default washing option, please refer to the
introduction of programs)
Extra Rinse
Pressing the Function button to switch to Extra Rinse, and press the
“Select” button within 3 seconds to choose Extra Rinse times or cancel
Extra Rinse. (For default washing option, please refer to the introduction
of programs)
2. Pre Delay: When use “Pre Delay” function for washing, the delay time is
0 hours to 24 hours.
When pushing the button for the first time, the screen display “Oh”, then
the maximum pre delay time can be 24 hours.
Push one more time for button, it will increase 1 hour.
If want to cancel the pre delay function, push “power” button or push one
cycle of “Pre Delay” button.
The pre delay time means from pre delay to wash ending time.
You should operate the pre delay function after selecting the program.
and before push the button of “Start/Pause”.
24
Page 54
3. Tub clean: The program of drum clean is use the high water level, high
water temperature, high speed to clean the drum and kill the bacteria. The
detailed operations ways.
4. Child Lock function: You can lock and unlock the child lock function by
pushing “Pre Delay” 3 seconds when the machine is running.
Once the child lock function set, all the other buttons will be locked except
the power button.
When the washing process ending or push “power off” button or default
warning, the child lock function cannot be unlocked. It means that the child
lock function must be unlocked by hand. When the power on and start the
machine, if the child lock function is going on(the lamp of child lock light up,
you need to push “Pre Delay” button for 3 second to unlock the child lock
function and then continue to operate the washing
machine.
5. Add garment function: During the process running, if you want to add
garment, please push "Start/Pause"button to stop running;
After around 5 seconds, it has a sound of unlocking, meanwhile the door
lock mark in the screen disappear then you can open the door.
Add the additional garment into the drum(Don't let the door clamp clothes,
this will cause failure of leakage and error).
Forced to open the door part, damage may occur, such as safety problem.
When there are many bubble in the inner barrel and plenty of water, open
the door, water and foam will flow out .
When the inner drum is running, it is in danger status since the temperature
of water is above 45℃ and there is plenty of water inside. At this time, the
door can not be forced to open. If want to open the door, please follow the
below instructions:
(1) Wait till the inner drum stop running.
(2) Wait till the water temperature cool down to below 45℃.If want to
open the door when the water temperature is above 45℃,please shut off
the power and open the door after 5 minutes.
Abnormal power off for 2 minutes, you can open the door. During the process
of running, the required condition for opening door(water level below door
gasket, water temperature below 45℃,spin speed is 0),push "Start/Pause"
button, wait till door lock mark disappear, then open the door. When closing
the door, press the middle place of the door handle.
25
Page 55
Push"Start/Pause"button to start the washing machine, it is normal to hear
"Clicking" sound, which is door locking sound not an error. If it occurs"dE"
warnings, please use hand to push and shut the door. Push two times of
"Start/Pause"button to continue running of the machine.
6. Quick entering into the functions: Power on, push "Power" button, directly
push the following functional button(no need to turn the knob).
Push "Start/Pause" to enter standard washing mode directly.
"Spin speed" button,the washing machine enter" Spin only"mode(You can
choose spin speed),push "Start/Pause"button to start the washing machine.
7. Eliminate the sound: Push "Prewash"button for 3 seconds to start/close
the sound during the process running.
8. Power-off Memory: When there is power on again after a period of
power-off, the machine will continue the working process at the time
node of last power-off action.
9. Automatic Power Off: After the whole washing process is finished,
the machine will be automatically powered off after 120 seconds.
Notice before Washing
1.Washing guide identification
Please check cloths washing guide identification ,which shows
cloths texture and washing method.
2.Classification washing
Please wash cloth of the same texture, different texture,
different water temperature,
please split deep colored cloths from white cloths.Split dyed
cloths from cotton, otherwise the white cloths would be
discolored. If possible,
cloths with clean ones together.
speed and washing procedure,
please do not washing high contaminated
The degree of pollution
(serious, moderate,slight)
color (white, light color, deep color)
velveteen
(easy to fall off, easy to be adhered)
26
classify clothes and wash
according to the degree.
classify them and wash.
classify the white and the
deep color.
Page 56
3.Notes
When put big and small clothes together, put the big first and they
have to be less than half of total clothes. Please don't wash single
cloth because it may cause the trouble of imbalance.
Please add one or two similar clothes.
Small clothes like silk stockings and handkerchiefs should be put
into mesh bags to wash. Before washing the bra with steel rings,
please take the rings off. If it is inconvenient to do this, please put
them into mesh bags to prevent the bra slipping into the gap between
internal and external tubs.
Check all pockets and make sure nothing in them. Nails, hairpin,
match, pen, coin and key will damage your washer and clothes.
Zip up all clothes, fix the button and hook and tie the loose belt,
make sure that other clothes cannot be damaged by them.
Firstly use the water with a little detergent to wash the parts with too
many stains, such as collar and cuffs, which can make the clothes
cleaner.
Check the door seals and make sure nothing on them.
Make sure there is nothing in the tub before washing.
Please use the low bubble detergent specially for front loading
washing to wash the cloths.
27
Page 57
Non-fault conditions
The door can't
open.
There is an odor.
There is too little
water when wash
and rinse.
No water
inflowing.
Water inflows
halfway
Water outflows
when washing.
Remaining time
changes
The program is running.
There are clothes between the door and
door seals.
There may be a smell of rubber because
some components are made up of rubber.
Roller washing machine just needs a little
water when operating.
Is the tap turned on?
Is the inlet pipe frozen?
Are the filters blocked?
If the water level declines, the washer will
supply water automatically.
Check if add the detergent with too much
bubbles.
If clothes are off center when spin,
spinning time will extend to correct the
deviation.
There is abnormal
noise when spin.
The washer can't
work after the
failure of electricity.
Check if the power line touches with cabinet.
Have the transport bolts been dismantled?
Are there some hairpins or coins in the roller?
The washer will stop working after the
failure of electricity. When the power is
restored, it still can't continue to work.
Please press the power button and
reset the program.
28
Page 58
Troubleshooting guide
Phenomenon
Washer can't start
Spinning screen
shows “UE”
Water inflow
screen shows “IE”
Water outflow
screen shows “OE”
Door trouble
screen shows “DE”
Not heating,
screen shows
Keep water inletting
without stop, screen
shows “FE”
The wash drum does
not running, screen
shows “LE” or “CE”
Too much bubble
“” E
check points
Check if press the power button or
start/pause button?
Is the plug pulling out?
Is there a power failure?
Check if cut the leakage protector?
Check if disassemble the carriage bolt?
Is the machine placed steadily?
Are the clothes too small or light?
Are the locknuts on under the feet
tightened up?
Check if turn the tap off?
Is the water supply cut off or the water
pressure too low?
Are the water inlet pipes frozen?
Are the filters blocked?
Are the outlet pipes placed too highly?
Are the outlet pipes frozen?
Are the outlet pipes blocked?
Are the floor drain blocked?
Make sure if start the washer without
closing the door well.
Please pull out the plug and call for the after sale service
Due to the abnormal of water inlet valve
and water level sensor
Please pull out the plug and call for the after sale service
If adding the amount of detergent is more
than the suggested?
If use the low bubble detergent which is
especially for front loading washing
machine?
Press the power button or start/
pause button.
Connect the plug.
Please wait.
Open the leakage protector.
Disassemble the carriage bolt.
Place the machine on a steady ground.
Add more clothes.
Tighten up the locknuts.
Open the stopcock.
Please wait.
Use hot water to unfreeze the pipes.
Take out the filters and clean them.
Please put away the outlet pipes
and make sure the height within 1M.
Use hot water to unfreeze the pipes.
Take out the foreign matter and
dredge the pipes.
Clean the floor drain.
Make sure the door truly closed
Shut the water tap, pull out the plug
and call for the after sale service
Add proper amount of detergent.
Use the correct type of detergent.
solutions
29
Page 59
Specification
200W
500W
1500W
1700W
1200
75
30
Page 60
The following data just for reference only
energyconsumption
(KW h/cyc le)
0.0635
Wool
waterconsumption
(L/ cycle )
41
Ave rage re maini ng
moi sture c onten t
76%
Cotton
Cotton
80
1:07
2:00
1:07
68
0.35
1.970
0.6560
0.0538
800
800
62%
62%
3
3
80%
80%
Page 61
PRODUCT FICHE
ALF1138
8.0
79.2
1.0 4
85
cm
60
51
D
0.720
40
40
35
1200
1200
1200
3:38
2:48
2:48
75B
47
50
51
57
B
N/A
N/A
Page 62
8.0
1.030
0.660
0.430
0.720
0.909
79.2
52.0
46.0
43.0
47
1.04
1.04
1.04
Page 63
5.0
5.0
5.0
3:38
2:48
2:48
40
30
35
1200
1200
1200
50
51
57
53
75
0.50
Page 64
N/A
NO
N/A
4.00
Page 65
Spe cifica tion, pictu re and fe ature a re subj ect to ch ange wi thout p rior no tice fo r purpo se of pro duct improvement.
X2373-001-8154(A)
31
Page 66
Loading...