Aspen Manufacturing CR User Manual

PRODUCT DIMENSIONS & SPECIFICATIONS

W

Representative image only. Some models may vary in

appearance. Due to continuous product improvement,

specifications are subject to change without notice.

D

DX-TREME CR SERIES

DEDICATED HORIZONTAL PLENUM COIL

WITH BUILT-IN AUXILIARY DRAIN PAN

STANDARD SPECIFICATIONS

• Rifled copper tubing, enhanced aluminum fins

• Immersion-tested at 500 psi, then nitrogen-pressurized and sealed

• Liquid line - 3/8” ODS, suction line - 3/4” ODS on 1-1/2- 3 ton & 7/8” ODS on 3-1/2 - 5 ton.

• Externally mounted flowrater body or internally mounted factory-installed TXV

• Schrader valve on liquid line for hiss-testing

• Refrigerant lines exit top of coil

H

• Split access doors on top of coil for easy service

• Plastic drain pans (primary and secondary)

• Built-in auxiliary drain pan with 3/4” FPT

• Plenum sides and end constructed of foil-backed faced fiberglass ductboard. Plenum top and
bottom constructed of galvanized steel

• AHRI certifiable with all brands of A/C and heat pump systems

• ETL listed for use with R-22 and R-410a when proper metering device is used

• Patented design (Patent No. 8,869,548 B2)

• Ten-year limited warranty with registration

COIL

MODEL

CR24A* 0.055 20-1/2 31 15-1/2 42 51 N/A 8

CR24B* 0.055 20-1/2 31 19-1/2 47 56 N/A 8

CR24C* 0.055 20-1/2 31 23-1/2 57 69 N/A 8

CR30A* 0.059 20-1/2 31 15-1/2 48 58 N/A 8

CR30B* 0.059 20-1/2 31 19-1/2 47 56 N/A 8

CR30C* 0.059 20-1/2 31 23-1/2 57 69 N/A 8

CR36A* 0.068 20-1/2 31 15-1/2 55 66 N/A 8

CR36B* 0.068 20-1/2 31 19-1/2 55 66 N/A 8

CR36C* 0.068 20-1/2 31 23-1/2 57 69 N/A 8

CR36D* 0.068 20-1/2 40 19-1/2 93 112 N/A 8

CR42A* 0.074 20-1/2 40 19-1/2 62 75 N/A 8

CR42B* 0.074 20-1/2 40 23-1/2 67 80 N/A 8

CR42C* 0.074 20-1/2 40 25-1/2 62 75 N/A 8

CR48A* 0.08 20-1/2 40 23-1/2 76 92 N/A 8

R410a

PISTON SIZE

CABINET WIDTH

(W)”

DIMENSIONS SHIPPING INFORMATION

CABINET DEPTH

(D)”

CABINET HEIGHT

(H)”

SHIPPING WEIGHT (LBS)

2 ROW 3 ROW 4 ROW

SKID

QTY

CR48B* 0.08 20-1/2 40 25-1/2 73 87 N/A 8

CR48C* 0.08 20-1/2 40 25-1/2 93 112 135 8

CR60A* 0.089 20-1/2 40 23-1/2 124 149 N/A 8

CR60B* 0.089 20-1/2 40 25-1/2 125 150 180 8

Phone: [phone]
Toll Free: 800.423.9007
Fax: [phone]

www.aspenmfg.com

* For complete warranty details visit www.aspenmfg.com.

Revised 02/23/17. In keeping with its policy of continuous progress and product improvement, Aspen reserves the right to make changes without notice and incurring obligation. © 2015