Aspen Manufacturing CQ User Manual

PRODUCT DIMENSIONS & SPECIFICATIONS

DX-TREME CQ SERIES DEDICATED

HORIZONTAL COILS WITH PLENUM AND

BUILT-IN AUXILIARY DRAIN PAN

(patent pending)

STANDARD SPECIFICATIONS

• Rifled copper tubing, enhanced aluminum fins.

• Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

• Liquid line - 3/8” ODS, suction line - 3/4” ODS on 1-1/2 - 3 ton & 7/8” ODS on 3-1/2 - 5 ton.

• Inlet and outlet dimensions are identical (without end caps).

• Externally mounted flowrater body with Schrader valve for hiss-testing.

• Refrigerant lines exit from top of coil.

• Split access doors on top of coil for easy service.

• Embossed galvanized cabinets standard.

• Fully insulated cabinets with faced insulation.

• Primary pan constructed of heavy duty plastic with four 3/4” FPT condensate drains (two per
side). Pan is positively sloped toward drains. Drain diverter channels condensate out of second­ary drain into auxiliary pan.

• Auxiliary pan constructed of painted galvanized steel with two 3/4” FPT condensate drains
(one per side).

• Plenum sides and top constructed of foil-backed faced fiberglass ductboard or sheet metal.

• Plenum end and bottom constructed of galvanized steel.

• AHRI certifiable with all brands of A/C and heat pump systems.

• ETL listed for use with R-22 and R-410a when proper metering device is used.

Representative drawing only.

Some models may vary in appearance.

COIL

MODEL

CQ24A* 0.059 0.055 22 46 18-1/8 47 55 63 8
CQ24B* 0.059 0.055 22 46 18-1/8 52 62 70 8
CQ24C* 0.059 0.055 22 46 22-1/8 63 73 82 8
CQ24D* 0.059 0.055 22 46 22-1/8 69 81 91 8
CQ30A* 0.068 0.059 22 46 18-1/8 52 62 70 8
CQ30B* 0.068 0.059 22 46 18-1/8 57 68 77 8
CQ30C* 0.068 0.059 22 46 22-1/8 69 81 91 8
CQ30D* 0.068 0.059 22 46 22-1/8 75 88 100 8
CQ30E* 0.068 0.059 22 46 22-1/8 55 65 74 8
CQ36A* 0.074 0.068 22 46 18-1/8 57 68 77 8
CQ36B* 0.074 0.068 22 46 18-1/8 62 74 85 8
CQ36C* 0.074 0.068 22 46 22-1/8 75 88 100 8
CQ36D* 0.074 0.068 22 46 22-1/8 81 96 109 8
CQ36E* 0.074 0.068 22 46 22-1/8 60 71 81 8
CQ42A* 0.080 0.074 22 46 20-1/8 63 75 86 8
CQ42B* 0.080 0.074 22 46 20-1/8 68 82 94 8
CQ42C* 0.080 0.074 22 46 24-1/8 76 91 104 6
CQ42D* 0.080 0.074 22 46 24-1/8 82 99 114 6
CQ42E* 0.080 0.074 22 46 24-1/8 66 79 90 6
CQ48A* 0.084 0.080 22 46 22-1/8 68 82 94 8
CQ48B* 0.084 0.080 22 46 22-1/8 74 89 102 8
CQ48C* 0.084 0.080 22 46 26-1/8 82 99 114 6
CQ48D* 0.084 0.080 22 46 26-1/8 89 108 124 6
CQ48E* 0.084 0.080 22 46 26-1/8 71 86 98 6
CQ60A* 0.092 0.089 22 46 26-1/8 82 99 114 6
CQ60B* 0.092 0.089 22 46 26-1/8 89 108 124 6
CQ60C* 0.092 0.089 22 46 28-1/8 95 115 132 6

CQ60D*(1) 0.092 0.089 22 46 28-1/8 103 125 144 6

CQ60E* 0.092 0.089 22 46 28-1/8 86 104 119 6
CQ60F* 0.092 0.089 22 46 22-1/8 74 89 102 8
CQ60G* 0.092 0.089 22 46 26-1/8 91 110 126 6

Note: (1) Primary pan constructed of powder-painted galvanized steel (P/N 1823)..

PISTON SIZE

CABINET WIDTH

R22 R410a 2 ROW 3 ROW 4 ROW

(W)”

Phone: [phone]
Toll Free: 800.423.9007
Fax: [phone]

www.aspenmfg.com

* For complete warranty details visit www.aspenmfg.com.

Revised 04/02/14. In keeping with its policy of continuous progress and product improvement, Aspen reserves the right to make changes without notice and incurring obligation. © 2014

• Ten-year limited warranty.

POPULAR OPTIONS:

• Factory or field-installable TXV.

• Schrader mounted on suction manifold external to cabinet.

DIMENSIONS SHIPPING INFORMATION

CABINET DEPTH

(D)”

CABINET HEIGHT

(H)”

SHIPPING WEIGHT (LBS)

SKID

QTY