Aspen Manufacturing CB User Manual

Representative drawing only.

Some models may vary in appearance.

PRODUCT DIMENSIONS & SPECIFICATIONS

DX-TREME CB SERIES

DEDICATED HORIZONTAL COILS

STANDARD SPECIFICATIONS

• Rifled copper tubing, enhanced aluminum fins.

• Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

• Liquid line - 3/8” ODS, suction line - 3/4” ODS on 1-1/2- 3 ton & 7/8” ODS on 3-1/2 - 5 ton.

• Inlet and outlet dimensions are identical (without end caps).

• Externally mounted flowrater body with Schrader valve for hiss-testing.

• Refrigerant lines exit from the top of the coil.

• Split access doors on top of the coil for easy service.

• Embossed galvanized cabinets standard.

• Top, bottom, and side flanges for furnace connection

• Fully insulated cabinets with faced insulation.

• Heavy duty plastic drain pan with four 3/4” FPT galvanized condensate drains (two per side).
Pan is positively sloped toward drains.

• AHRI certifiable with all brands of A/C and heat pump systems.

• ETL listed for use with R-22 and R-410a when proper metering device is used.

• Ten-year limited warranty.

POPULAR OPTIONS:

• Factory or field-installable TXV.

• Powder painted stainless steel drain pan.

• Schrader mounted on suction manifold, external to cabinet.

COIL

MODEL

CB24A* 0.059 0.055 22 22-3/4 16-3/4 29 37 45 16
CB24B* 0.059 0.055 22 22-3/4 16-3/4 34 44 52 16
CB24C* 0.059 0.055 22 22-3/4 20-3/4 37 47 56 16
CB24D* 0.059 0.055 22 22-3/4 20-3/4 43 55 65 16
CB30A* 0.068 0.059 22 22-3/4 16-3/4 34 44 52 16
CB30B* 0.068 0.059 22 22-3/4 16-3/4 39 50 59 16
CB30C* 0.068 0.059 22 22-3/4 20-3/4 43 55 65 16
CB30D* 0.068 0.059 22 22-3/4 20-3/4 49 62 74 16
CB30E* 0.068 0.059 22 22-3/4 20-3/4 37 47 56 16
CB36A* 0.074 0.068 22 22-3/4 16-3/4 39 50 59 16
CB36B* 0.074 0.068 22 22-3/4 16-3/4 44 56 67 16
CB36C* 0.074 0.068 22 22-3/4 20-3/4 49 62 74 16
CB36D* 0.074 0.068 22 22-3/4 20-3/4 55 70 83 16
CB36E* 0.074 0.068 22 22-3/4 20-3/4 42 53 63 16
CB42A* 0.080 0.074 22 22-3/4 18-3/4 44 56 67 16
CB42B* 0.080 0.074 22 22-3/4 18-3/4 49 63 75 16
CB42C* 0.080 0.074 22 22-3/4 22-3/4 54 69 82 12
CB42D* 0.080 0.074 22 22-3/4 22-3/4 60 77 92 12
CB42E* 0.080 0.074 22 22-3/4 22-3/4 47 60 71 12
CB48A* 0.084 0.080 22 22-3/4 20-3/4 49 63 75 16
CB48B* 0.084 0.080 22 22-3/4 20-3/4 55 70 83 16
CB48C* 0.084 0.080 22 22-3/4 24-3/4 60 77 92 12
CB48D* 0.084 0.080 22 22-3/4 24-3/4 67 86 102 12
CB48E* 0.084 0.080 22 22-3/4 24-3/4 52 67 79 12
CB60A* 0.092 0.089 22 22-3/4 24-3/4 60 77 92 12
CB60B* 0.092 0.089 22 22-3/4 24-3/4 67 86 102 12
CB60C* 0.092 0.089 22 22-3/4 26-3/4 71 91 108 12

CB60D* (1) 0.092 0.089 22 25 26-3/4 79 101 120 12

CB60E* 0.092 0.089 22 22-3/4 26-3/4 64 82 97 12
CB60F* 0.092 0.089 22 22-3/4 20-3/4 55 70 83 16
CB60G* 0.092 0.089 22 22-3/4 24-3/4 69 88 104 12

Note: (1) Primary pan constructed of powder-painted galvanized steel. If ordering auxiliary pan, please specify #1823.

PISTON SIZE

CABINET WIDTH

R22 R410a 2 ROW 3 ROW 4 ROW

(W)”

DIMENSIONS SHIPPING INFORMATION

CABINET DEPTH

(D)”

MAX FURNACE

WIDTH (OR HEIGHT

WHEN HORZ.)

SHIPPING WEIGHT (LBS)

Phone: [phone]
Toll Free: 800.423.9007
Fax: [phone]

www.aspenmfg.com

* For complete warranty details visit www.aspenmfg.com.

Revised 04/02/14. In keeping with its policy of continuous progress and product improvement, Aspen reserves the right to make changes without notice and incurring obligation. © 2014

SKID

QTY