Aspen Manufacturing BH User Manual

Representative image only. Some models may vary in

appearance. Due to continuous product improvement,

specifications are subject to change without notice.

PRODUCT DIMENSIONS & SPECIFICATIONS

BH SERIES HORIZONTAL COILS

GENERAL SPECIFICATIONS

• Standard refrigerant connections: liquid line - 3/8” ODS,
suction line - 7/8” ODS.

• Two 3/4” MPT condensate drains.

• Powder-painted metal drain pan. Stainless available.

• Five-year limited warranty.

• Flowrater standard. Factory or field-installable TXV available.

• Immersion-tested at 500 psi, then nitrogen-pressurized and sealed.

• Heavy gauge embossed galvanized cabinet fully lined with 1/2” faced insulation.

• Rifled copper tubing, enhanced aluminum fins.

• ETL listed.

COIL

MODEL

BHA SLAB HIgH HORIzONtAL COILS

BHA** 24 N/A 23-1/2 21 16 21-1/2

BHA** 36 N/A 23-1/2 21 24 29-1/2

BHA** 48 N/A 23-1/2 21 29 34-1/2

BHA** 60 N/A 25 21 29 34-1/2

BHC HORIzONtAL COILS

BHC24 24 RTE524CH 21-1/2 17-1/2 22 27

BHC32 36 RTE536CH 21-1/2 17-1/2 22 27

BHC32 48 RTE48CH, 548CH 21-1/2 17-1/2 28 33

BHC32 60 RTE60CH 25-1/2 21-1/2 28 33

BHL SLAB LOW HORIzONtAL COILS

BHL** 24 N/A 17 14-1/2 21-1/2 27

BHL** 36 N/A 17 14-1/2 21-1/2 27

BHL** 48 N/A 17 14-1/2 29 36

BHL** 60 N/A 21 18-1/2 29 36

BHR SLAB HORIzONtAL COILS

BHR24 24 N/A 23-1/2 21 16 21-1/2

BHR32 36 N/A 23-1/2 21 16 21-1/2

BHR32 48 N/A 23-1/2 21 24 29-1/2

BHR32 60 N/A 25-1/2 21 24 29-1/2

BH232 60 SLAB HIgH HORIzONtAL COILS

BH232 60 N/A 23-1/2 21 33-3/4 39-1/4

REPLACES

HEIGHT (B)”

DIMENSIONS

OPENING

(C)” (D)”

LENGTH (E)”

Phone: [phone]
Toll Free: 800.423.9007
Fax: [phone]

www.aspenmfg.com

* For complete warranty details visit www.aspenmfg.com.

Revised 11/03/16. In keeping with its policy of continuous progress and product improvement, Aspen reserves the right to make changes without notice and incurring obligation. © 2016