Askey Computer QBMSCFXL User Manual

What’s in the box Set-up Camera Connect it to Gateway

1 2

Power ON/OFF WPS – 2 seconds

WPS – 2 seconds

Multi-Sensor Camera

QB-MSC-FXL

WWW.shiftcontrolplay.com

Multi-Sensor Camera Power Supply

Plug your QBee Camera into a power outlet.

Power it on. Wait for 60 seconds

Press the WPS Button for 2 seconds – LED blinks white.

1 LA

Press the WPS Button for 2 seconds – LED blinks white.

Once the pairing is successful the LEDs of the Camera and

Gateway change to solid white.

The Camera will appear on your mobile and/or TV screen.

Troubleshooting

Support

LEDs & Buttons

Reconnect Camera

In case the Camera loses the connection to your QBee
Gateway, they have to be paired with the Gateway again.

Pairing – To do so, press the WPS button of your QBee
Gateway for 2 seconds. The LED on the Gateway will start
blinking in white.

Then press the WPS button on the Camera for 2 seconds.

The LED on the Camera will start blinking in white. When
the pairing is done, the LED will light solid white.

If the pairing of the Camera does not work, please reset
your Camera by pushing the WPS button for 10 seconds.
This will restore your Camera to factory settings. Once the

reset is complete, please repeat the Pairing process.

QBee support is available online at

Privacy Button (on top) – LED White > Privacy on

www.shiftcontrolplay.com

Lens Night Vision LEDs

Power ON/OFF WPS Butt on

To contact QBee support go to

www.shiftcontrolplay.com/contact

Temperature Sensor

Humidity Sensor

LED

Off

White OK

Blinks white WPS Pairing in progress

Red Booting

Blinks red Problem / Not connected

Not powered

LED

Ambient Light Sensor

Camera Stand

Power Supply

WPS Butto n

Pairing

Reset Sets the Camera to its factory settings. Pairing is lost

Reconnect the Camera – press 2 s

Press 10 s – LED blinks red fast

Slide up and t urn
90° for Wall -Mount

v1 – 122015