Askey Computer QB-EMS-US1 User Manual
What’s in the box
1
Set-up Switch
WPS
2
Connect it to Gateway
WPS
Switch
www.shiftcontrolplay.com
Switch
Plug your QBee Switch into a power outlet.
Wait for 60 seconds
Press the WPS Button – LED blinks white.
LA1
Press the WPS Button – LED blinks white.
Once the pairing is successful the LEDs of the Switch and
Gateway change to solid white.
The Switch will appear on your mobile and/or TV screen.
Troubleshooting
Support
LEDs & Buttons
Reconnect Switch
In case the Switch loses the connection to your QBee
Gateway, they have to be paired with the Gateway again.
Pairing – To do so, press the WPS button of your QBee
Gateway. The LED on the Gateway will start blinking in
white.
Then press the WPS button on the Switch. The LED on the
Switch will start blinking in white. When the pairing is done,
the LED will light solid white.
If the pairing of the Camera does not work, please reset
your Switch by pushing the WPS button for 10 seconds. This
will restore your Switch to factory settings. Once the reset is
complete, please repeat the Pairing process.
QBee support is available online at
www.shiftcontrolplay.com
To contact QBee support go to
www.shiftcontrolplay.com/contact
LED
O Notpowered
White OK
Blinks white WPS Pairing in progress
Red Booting
Blinksred Problem/Notconnected
ON/OFF Button
LED
WPS
WPS Button
Pairing Reconnect the Switch – press 1 s
Reset Sets the Switch to its factory settings. Pairing will be lost.
Press 10 s – LED blinks red fast.
v1 – 122015
Loading...