Askey Computer PCT3200 Users manual

TN450A1

QUICK START & REGULATORY GUIDE

TURBONET

Product Features:

Product Specification:

8/addon 2/5,

Item Description

System

Processor

Android OS Android Jeally Bean 4.2.2

Memory 1GB LPDDR2 SDRAM

Storage Internal 8GB eMMC Flash

(To be continued)

Display, Camera and

Scaning

Display

Qualcomm MSM8960

Dual Core 1.5GHz

Size: 4.5"

Resolution: WVGA 720(W)*1280(H)

Display Type: TFT, Transmissive

Contrast ratio: 900 (Typ)

Brightness: 400 nits (Typ)

Backlight Type: LED

Viewing Angle: 80/80/80/80 (typ), Full viewing (IPS)

Capacitive Type, 5-point multiple touch, OGS

Touch Panel

Scanner

Glass: Dragontail, Anti-explosion, Wet Finger touch,

Strengthen Glass

Opticon MDI-3100-SR

1D/2D Barcode Hardware decode, CMOS sensor (black and

white)

Light source: Red*2 (auxiliary), Green*1 (aiming)

Effective pixel 752(H)x 480(V) dot

Aiming distance: L=110+/-20mm(from front edge of camera

module)

Image capture speed: 60 fps

Supported barcode types:

UPC-A/E/E1/addon 2/5, EAN-13/addon 2/5, EAN-

Code 39, Tri-optic, Codebar, Industrial 2 of 5, Interleaved 2 to

5, S-code, Matrix 2 of 5, Chinese Post Matrix 2 of 5, Korean

Postal Authority, Intelligent Mail, POSTNET, Japanese Postal,

IATA, MSI/Plessey, Telepen, UK/ Plessey, Code 128/GSI 128,

CODE 93, CODE 11, GS1 Databar, GS1 Databar Limited, GS1

Databar Expanded, Codeablock F, DataMatrix ECC200,

DataMatrix ECC000-140, Aztec Code, Aztec Runes, Chinese

Sensible Code, QR Code, Micro QR Code, Maxi Code, PDF 417,

Micro PDF417, GS1 DataBar Composite, UPC/EAN Composite.

Front Camera No

Sensor OmniVision MT9E013

Resolution: 8MP (3264H*2448V)

Angle of view: 74.5°C

Auto-Focus Type: VCM(Voice Coil Motor)

Rear Camera

Communication and WLAN network

Radio

GPS Qualcomm GPS One Gen8, AGPS, Glonass

Bluetooth

WLAN

Focus Range: 10cm~ Infinity

Automatic Mode :

AEC (Auto exposure Control),

AGC (Auto Gain Control),

AWB (Auto White Balance),

Support Voice Call

- LTE 3/7/8/20 (1800/2600/900/800MHz)

- UMTS 1/3/5/8

(2100/1800/850/900MHz)

- GSM 850/900/1800/1900

4.0 Class II EDR

Profile: PAN, HSP, HID, FTP, DUN, A2DP, AVRCP and OPP

profiles

802.11 a/b/g/n Dual Band (2.4G/5G), Wi-Fi direct, Wi-Fi

hotspot (2.4G)

NXP PN547

NFC (Optional)

Power

Battery Capacity 3450 mAh (3.7V)

Battery removable Non-removable

Battery Charging

Time

NFC detect range: 0~4cm

Card type: ISO/ICE 14443A/MIFARE; Jewel/Topaz tags; FeliCa

cards; ISO/IEC 14443B; ISO/IEC 15693/ICODE

4.5 hours

Battery Life 10 hours1

Reset Function Physical key under micro SD door

(1) AC adaptor charging (via micro USB)

Charging method

(2) docking station charging (no sleeve charging)

(3) battery cartridge

Wireless charger

Qi (WPC V1.1) Compliant Power Supply

(Optional)

RTC Yes

Peripheral

3-axis accelerometer

Proximity sensor

Ambient light sensor

Sensors

Magnetometer

Gyroscope

GPS

2pcs

Indicator

(Indication of battery full, low battery, charging(including

wireless charging) and BT)

Receiver 1pcs

Audio Jack N/A

Vibrater 1pcs

Speaker 1pcs

Microphone 2pcs

I/O

On main board (internal). Please see pin define in Appendix 1

Extension port

(P.13)

Micro USB 1pcs, OTG, software upgrade, battery charging

SD Card Micro SD (SDHC can support up to 64GB)

SIM card Micro Dual SIM sockets

Power*1

Volume (up and down)

Buttons

Programmable key*3pcs

(original scan key*2pcs, original P key*1pcs)

1

Conditional and vary depending on different user scenario.

Mechanical and Environment

Temperature (include

Dimension L 149.87 x W 80.24 x T 30.61 mm

Weight 345g

Ingress Protection IP65

Drop 1.5M on poly wood, 6 drops

ESD

Operating

LCM and battery)

Storage Temperature -20~+60°C

Accessories (in package)

Adaptor Jack 1pcs, 5.35V/2A

Micro USB to USB

Cable

Hand strap 1pcs

Air: ±8KV

Contact: ±4KV

0°C~ 45°C battery in charging mode

-20°C+60°C battery in discharging mode

1pcs, 100cm

Micro SD / MicroSIM Card Installation

Open MicroSD/MicroSIM door, insert the Micro SD into slot.

Insert Micro SIM into SIM slot.

(Note: SIM 1 is set as default network connection; SIM switch: Go to “Settings” in Android system

“SIM SWITCH” “Choose SIM” “SIM 2”)

Close the door after installation.

Getting Started

 Charge the battery

Before using the TN450A1, charge the battery using one of the following

accessories approved by TURBONET :

- Micro USB cable through PC

- Micro USB cable + Power Adaptor Jack

- Cradle Charging + DC Power Cable + Power Adaptor Jack

Left LED blinks in red indicating low and risk battery and stating red indicating

that the battery is charging. the LED becomes green when battery is fully

charged, then.

 Power On TN450A1

Press and release the power button

Note:

Device turns to the modes as below by pressing power button key.

Suspend Mode

Press and release the power button to place the TN450A1 in suspend mode. In suspend mode

the device turns off the display and goes into a low power state to conserve battery power.

Power Off

To Power off the TN450A1, press and hold the button until the device option dialog box appears,

choose “Power off”. When the Power off dialog box appears, tap “OK”.

Reset

Reset the TN450A1 if application stop responding. Press and hold the power button until the

device options dialog box appears then touch Reset.

Hardware Reset

If the TN450A1 stop responding, perform a hardware reset by long press power button.

Data Capture

 Scan a Bar Code with Imager

1. Switch on the barcode

Go to “Settings” find Barcode Scan Slide Barcode Scan to “ON”

Settings

- Go to “BarcodeScan” Type: To choose Barcode type

Barcode Scan

- Select “ Beep”: To have beep sound after scan

- Select” Vibrate”: Need device vibration after scan

- Select” Automatic Carriage Return” Require to send enter key

automatically after scan

2. Launch a bar code reading application or use Data Wedge.

3. Point the exit window at the bar code

4. Press and hold the two side Scan button

Left/Right Side Key Set-up:

Go to “Settings” Select “Remap button & Shortcut”

Select “P1”

Select Remap Key

Choose “Barcode Scan”

Scan Key(P1)

Select “P2”Remap Key choose “Barcode Scan”

(P2)

5. The red laser aiming pattern turn on to assist in aiming , scan ready when beep

sounds.

6. Release the scan button.

 Scan a Bar Code with Camera

Using the rear camera to scan bar code.

1. Launch a bar code reading application or use Data Wedge.

2. Point the back of the TN450A1 at the bar code.

3. Press the scan button

Photo & Videos

Using the rear camera to take photos and capture video.

Note: Ensure device memory or extend Micro SD card is space is available.

GPS Information

 Acquiring satellite signals may take a few minutes.
 Without a clear view, acquisition takes longer and possible unable to catch the

position quickly.

 Turn off GPS application if no use.

Near Field Communication (NFC) Feature

Allow Data exchange in short-range (less than 4cm) when the phone touches another

device. The NFC areas, being of both a phone and other NFC compatible device (ex:

tags, reader, phones and so on.), should be close to one another for communication.

 Enable NFC Feature

Go to “Settings” Tick “NFC”

NFC Detection

 Enable Android Beam

Slide to “ON”

Regulatory Information

 Caution: Only use TURBONET approved accessories.

Wireless Device Country Approval

Regulatory markings, subject to certification, are applied to the device signifying the

radio(s) are approved for use in the European countries under CE coverage.

For 2.4GHz or 5GHz products : Europe includes Austria, Belgium, Bulgaria, Czech

Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,

Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta,

Netherland, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.

Caution: Operation of the device without regulatory approval is illegal.

Country Roaming

This device incorporates the international roaming feature which will ensure the

product operates on the correct channels for the particular country of use.

Ad-Hoc Operation ( 5GHz Band )

Ad-Hoc operation is limited to Channels 36- 48 ( 5150 – 5250 MHz) . Use of this

band is restricted to indoor use only, any other use will make the operation of this

device illegal.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this

equipment.

This transmitter must not be co-located or operating in conjunction with any

other antenna or transmitter.

Please delete this sentence after 6/2, 2014, if EUT follow NEW U-NII rule.

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 10cm between the radiator & your body.

FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)

Note: The country code selection is for non-US model only and is not available

to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US

operation channels only.

Warnings of Use Wireless Devices

Please observe warning notices with regard to the usage of wireless devices.

Potentially Hazardous Atmospheres – Vehicles Use

You are reminded of the need to observe restrictions on the use of radio devices in

fuel depots, chemical plants etc. and areas where the air contains chemicals or

particles ( such as grain, dust, or metal powders ) and any other area where you

would normally be advised to turn off your vehicle engine.

Safety in Aircraft

Turn off your wireless device whenever you are instructed to do so by airport or

airline staff.

Safety in Hospitals

Wireless devices transmit radio frequency energy and may affect medical electrical

equipment. Wireless devices should be switched off whenever you are requested

to do so in hospitals, clinics or healthcare facilities. These requests are designed

to prevent possible interference with sensitive medical equipment.

Safety Information – Europe

This device was tested for typical body-worn operation. Use only TURBONET tested

and approved accessories to ensure EU compliance.

Laser Devices

Class 2 laser scanners use a lower power, visible light diode. As with any very bright

light source, such as the sun , the user should avoid staring directly into the light

beam. Momentary exposure to a class 2 laser is not known to be harmful.

Caution: Use of controls, adjustments or performance of procedures other than

those specified herein may result in hazardous laser light exposure.

Power Adaptor

 Use only a TN450A1 approved Power Adaptor with electrical ratings : Output

5VDC, min 2A, with a maximum ambient temperature of at least 45℃.

 Use of alternative power adaptor will invalidate any approvals given to this device

and maybe dangerous.

Battery Information

Use only a TURBONET approved batteries.

When batteries are stores over six (6) months, some irreversible deterioration in

overall battery quality may occur. Store batteries at half of full charge in a dry, cool

place, removed from the equipment to prevent loss of capacity , rusting of metallic

parts and electrolyte leakage. When storing batteries for one year or longer, the

charge level should be verified at least once a year and charged to half of full charge.

Batty Safety

 The area in which the units are charged should be clear of debris and

combustible materials or chemicals. Particular care should be taken where the

device is charged in a non -commercial environment.

 Follow battery usage, storage, and charging guidelines found in the user guide.
 Improper battery use may result in a fire, explosion, or other hazard.
 To charge the device battery, the battery and charger temperature must be

between 0℃~+50℃

 Do not use incompatible batteries and chargers. Use of an incompatible battery

or charger may present a risk of fire, explosion, leakage, or the hazard.

 Do not disassemble or open, crush, bend or deform, puncture, or shred.
 Severe impact from dropping any battery-operated device on a hard surface

could cause the battery to overheat.

 Do not short circuit a battery or allow metallic or conductive objects to contact

the battery terminals.

 Do not modify or remanufacture, attempt to insert foreign objects into the

battery, immerse or expose to water or other liquids, or expose to fire, explosion,

or other hazard.

 Do not leave or store the equipment in or near areas that might get very hot,

such as in a parked vehicle or near a radiator or other heat source. Do not place

battery into a microwave oven or dryer.

 Battery usage by children should be supervised.
 Please follow local regulations to promptly dispose of used re-chargeable

batteries.

 Do not dispose of batteries in fire.
 Seek medical advice immediately if a battery has been swallowed. In the event of

a battery leak, do not allow the liquid to come in contact with the skin or eyes. If

contact has been made, wash the affected area with large amounts of water and

seek medical advice.

Marking and European Economic Area (EEA)

Frequency of Operation

The use of 2.4 GHz RLAN's, for use through the EEA, have the following restrictions:

 Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400

- 2.4835 GHz

France, outside usage is restricted to 2.4 - 2.454 GHz.



 Italy requires a user license for outside usage. Bluetooth

®

Wireless Technology

for use through the EEA has the following restrictions:

 Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400

-2.4835 GHz

 France, outside usage is restricted to 10mW EIRP
 Italy requires a user license for outside usage.