Page 1
Passive
interface
(d-sub/terminals)
C
A
B
BLOCK DIAGRAMS / NOTES Block diagram
The modules allow the transfering to the
terminals of the deriving signals on a cable
with connector type D-Sub.
The numeration is “pin - to - pin.”
The block diagram is reported to the version without LED.
(1) The LED have predisposed for a nominal voltage of 24 Vdc.
VERSION DIMENSION
112
2 9 15 25937
15 25 37 C
112
ORDERING INFORMATION
(A x B x C) male with LED female with LED
29 poles –
15 poles –
25 poles 80x66x93
37 poles 109x66x93
–
–
ISD25PML
ISD37PML
Cod. XISD25PML
Cod. XISD37PML
–
–
ISD25PFL
ISD37PFL
C
A
B
15 25 37 C
2 9 15 25937
Cod. XISD25PFL
Cod. XISD37PFL
GENERAL TECHNICAL DATA
Rated voltage
Rated current
Housing material
Display
Type / section terminals
Mounting information
Mounting rail
according to IEC60715/TH35
Mounting rail
according to IEC60715/G32
24 Vdc (1)
2 A
polyamide UL94V-0
LED
terminal block 2.5 mm
adjacent without gap
PR/3/AC - PR/3/AS
PR/DIN/AC - PR/DIN/AS - PR/DIN/AL
2
24 Vdc (1)
2 A
polyamide UL94V-0
LED
terminal block 2.5 mm
adjacent without gap
PR/3/AC - PR/3/AS
PR/DIN/AC - PR/DIN/AS - PR/DIN/AL
2
Loading...